Clutch Linkage Picture - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Baketown Scotty** · 11-04-2013, 02:14 PM

CAn someone post a picture of the clutch linkage going throught the floor/ firewall? I have a 1964 Suburban 4WD and am trying to determine if what I have is correct. I don't have a shop manual yet.

**Baketown Scotty** · 11-08-2013, 01:14 AM

Anyone have a picture of clutch rod going through floor?

63suburban · 11-08-2013, 01:23 PM

took a couple for you sorry for the poor quality (mobile pics)
above & below firewall

**Baketown Scotty** · 11-25-2013, 05:27 PM

Here is what I have. What is the hole for just above the clutch rod?

63burban · 11-26-2013, 12:31 AM

Speedo cable

**Captainfab** · 11-26-2013, 02:12 AM

If I am seeing correctly, that is where your clutch rod should be....in the round hole in the floor where it meets the firewall.

Quote:

Originally Posted by Baketown Scotty

Here is what I have. What is the hole for just above the clutch rod?

**Baketown Scotty** · 11-26-2013, 08:38 PM

I was thinking the rod may be going through the wrong hole as the upper hole sure looks a lot cleaner.

*Sharps40* · 11-26-2013, 09:28 PM

Shaq! The clutch down rod don't go thru the rust hole...it go's thru the big neat hole right next to the speedo cable hole (the smaller hole at 11 oclock to the big neat hole). Fix the rust hole though!

crazyhenryj · 12-03-2013, 05:19 PM

here is mine from inside engine bay - 65 4spd - 292 6cyl - threaded rod is adjustment off actuator arm

Grandpa54 · 12-08-2013, 01:49 PM

Quote:

Originally Posted by baketown scotty

i was thinking the rod may be going through the wrong hole as the upper hole sure looks a lot cleaner.

scotty, captainfab is correct it goes through the bigger hole just above where the rod is in your picture. It gets a cone shaped rubber boot in the hole. I dont have any pic but i just took one apart last week. I may have still have the boot. I can look if you like? Im in bako also so call if you want, mark ill pm you

**Baketown Scotty** · 12-12-2013, 08:31 PM

Grandpa54, If you would like to part with the boot I am interested.

Grandpa54 · 12-12-2013, 10:44 PM

I will check tomorrow if i still have it.

11-04-2013, 02:14 PM	#1
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Clutch Linkage Picture CAn someone post a picture of the clutch linkage going throught the floor/ firewall? I have a 1964 Suburban 4WD and am trying to determine if what I have is correct. I don't have a shop manual yet.

11-08-2013, 01:14 AM	#2
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Re: Clutch Linkage Picture Anyone have a picture of clutch rod going through floor?

11-08-2013, 01:23 PM	#3
63suburban Registered User Join Date: Apr 2013 Location: San Jose,CA Posts: 62	Re: Clutch Linkage Picture took a couple for you sorry for the poor quality (mobile pics) above & below firewall Attached Images __________________ 1963 Chevrolet Suburban

11-25-2013, 05:27 PM	#4
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Re: Clutch Linkage Picture Here is what I have. What is the hole for just above the clutch rod? Attached Images

11-26-2013, 12:31 AM	#5
63burban Chevy addict Join Date: May 2012 Location: Iron Ridge, WI Posts: 1,085	Re: Clutch Linkage Picture Speedo cable

11-26-2013, 08:38 PM	#7
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Re: Clutch Linkage Picture I was thinking the rod may be going through the wrong hole as the upper hole sure looks a lot cleaner.

11-26-2013, 09:28 PM	#8
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: Clutch Linkage Picture Shaq! The clutch down rod don't go thru the rust hole...it go's thru the big neat hole right next to the speedo cable hole (the smaller hole at 11 oclock to the big neat hole). Fix the rust hole though!

12-03-2013, 05:19 PM	#9
crazyhenryj Registered User Join Date: Jan 2013 Location: St Augustine FL Posts: 17	Re: Clutch Linkage Picture here is mine from inside engine bay - 65 4spd - 292 6cyl - threaded rod is adjustment off actuator arm Attached Images

12-12-2013, 08:31 PM	#11
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Re: Clutch Linkage Picture Grandpa54, If you would like to part with the boot I am interested.

12-12-2013, 10:44 PM	#12
Grandpa54 Registered User Join Date: Mar 2011 Location: Bakersfield Ca. Posts: 417	Re: Clutch Linkage Picture I will check tomorrow if i still have it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.