Lift kit torsion bar????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

warpig98 · 03-29-2010, 11:02 PM

ok, i'm putting in a 6" suspension lift in my 2001 gmc. before i took it apart the directions said to mark the torsion bars before romoving them. now, i had them marked but then i took all of my suspension components in to get powder coated and now the marks are gone. i had both ends marked, the lower A-arm and the torsion key. so my question now is, how important is it to have them put back in the EXACT way they came out. cuz now i have no clue.

**truckdude239** · 03-30-2010, 08:10 PM

umm that is a really good question never thought about it

warpig98 · 03-30-2010, 09:45 PM

anybody have a clew. going to prolly beable to do that 2maro......

blyguy · 03-30-2010, 10:26 PM

not a big issue, just let the alignment shop know what happened. put them back close to the same on both sides, a good alignment shop will make sure the ride height is the same on both sides and correct them as needed. i did the same thing on a 96 ext cab shortbox and the alignment shop fixed me up with no issues, charged me 20 dollars more than a normal alignment.

03-29-2010, 11:02 PM	#1
warpig98 Registered User Join Date: Sep 2008 Location: arcadia, wisconsin Posts: 135	Lift kit torsion bar????? ok, i'm putting in a 6" suspension lift in my 2001 gmc. before i took it apart the directions said to mark the torsion bars before romoving them. now, i had them marked but then i took all of my suspension components in to get powder coated and now the marks are gone. i had both ends marked, the lower A-arm and the torsion key. so my question now is, how important is it to have them put back in the EXACT way they came out. cuz now i have no clue. __________________ THANK YOU SOLDIERS!!!!! VISIT MY 78 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=334884

03-30-2010, 08:10 PM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,228	Re: Lift kit torsion bar????? umm that is a really good question never thought about it __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

03-30-2010, 09:45 PM	#3
warpig98 Registered User Join Date: Sep 2008 Location: arcadia, wisconsin Posts: 135	Re: Lift kit torsion bar????? anybody have a clew. going to prolly beable to do that 2maro...... __________________ THANK YOU SOLDIERS!!!!! VISIT MY 78 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=334884

03-30-2010, 10:26 PM	#4
blyguy Registered User Join Date: Dec 2009 Location: Medicine Hat, Alberta, Canada Posts: 68	Re: Lift kit torsion bar????? not a big issue, just let the alignment shop know what happened. put them back close to the same on both sides, a good alignment shop will make sure the ride height is the same on both sides and correct them as needed. i did the same thing on a 96 ext cab shortbox and the alignment shop fixed me up with no issues, charged me 20 dollars more than a normal alignment. __________________ _____________________________________________ 1971 Chev C-10 SWB CST 2008 Chev 1500 Crew Cab LTZ 2010 VW EOS 2007 Harley Davidson Nighttrain



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.