OR 100's of misc parts from the last 6 trucks parted out

[longhorn70gmc]

Hello tll74,
I am interested in the following parts, but I have a few questions.
Pic 1
72 LH armrest needs painted DQ 10.00

I need a white one just like this one for the left driver’s side; does it have any holes or is it falling apart?

Pic 2
4 RH outside door handles DQ 15.00 each
2 LH outside door handles DQ 17.50 each
I need a set of these, 1 RH & 1 LH; are they in decent shape, no pitting or separation of chrome? They don’t have to be perfect.

Pic 4
3 tail lamp wiring harnesses for lwb 15.00 each
I need 1 harness, is this one that plugs into the harness on the frame in the rear by the bumper under the bed and runs up to the light sockets where the bulbs can be installed?

Thanks for putting up with my questions. My zip is 93555 and can I pay with money order? I will check back later. Good luck on your sales. You have allot of nice parts.
PS: Do you have an extra hook for a visor; need blue, but any color will do.
R/

[hjewell2]

I will take the rear tail lamp harness if it fits a 1970 let me know when you get time.

[tll74]

Originally Posted by hjewell2

I will take the rear tail lamp harness if it fits a 1970 let me know when you get time.

Just to be clear this is the harness from the cab to the plug at the rear bumper.
It will fit a 1970 long box.

[tll74]

Juarez823, The dash wiring is still in a truck. It looks fine from what I can see.
I will pull with commitment to buy pending condition. As far as changing the engine harness I think your ok. The temp sending unit will need to be changed out for the guage type.

70LonghornCST, It would clean up nice. I post a pic soon.

68Mike, look nice. no cut wires.

67gmcstepside, the emblems are eqaul condition. IndyRich asked about the 1500 emblems earlier Lets give him till morning to respond. After that your up on either pair.

Sarge, I have a very nice set of heater controls still in a truck. 47.00 shipped.

m6z, PM sent

cjohnson6772, I believe some has spoke up for the vent pulls in a earlier post. But don't worry I have many more not pictured. PM sent

ChrewCab59, Thanks

chevypoint, pics soon to come. no nice grills at this time. I have a couple 71-72 grills that would be nice drivers minor ding here and there and pits from rust. I have a nice upper I'll send pic soon.

kellytheaker, vent pics sent.

longhorn70gmc, the armrest has the typical cracks and minor deterioation. RH door handle no problem in a driver quality. The LH nicest LH is spoken for pending payment. The other LH does have average pitting.
No help for taillamp wiring at the lights.

72cheyenneman, I'll look for you. Probably so I have several trucks with engines still in them.

[77chris03]

Do u still have tbe black seatbelts? Please pm me
Posted via Mobile Device

[tll74]

Originally Posted by 77chris03

Do u still have tbe black seatbelts? Please pm me
Posted via Mobile Device

Sorry no black belts at this time. PM sent

[C. M. Wolf]

Hello Til74,(Tom), I need a right side,(passenger), bench seat slide-rail mounting bracket for a 70 Chevy, C-20.

The one I have now is missing the locking catch sys & cable to the left side. Have you anything like this left to sell? "Please" PM me with some contact info and I'll be right on it,(I actually need a few things).

Michael

[tll74]

Originally Posted by Last_Paladin

These are the ones the regulator slides in, on the lower part of the door? Held into the door with 2 screws?

Sounds like you need the horizontal channel that mounts with two screws at the bottom and one at the top above the latch. I was talking about the channel mounted to the base of the glass.

Originally Posted by RexDodge

Just found your thread! Do you still have a dome light lense? 71 C10 is what it is for. I'll be in Eugene early next week. I'd like to stop by and look if that's possible. PM me info? Thanks.

PM sent

Originally Posted by C. M. Wolf

Hello Til74,(Tom), I need a right side,(passenger), bench seat slide-rail mounting bracket for a 70 Chevy, C-20.

The one I have now is missing the locking catch sys & cable to the left side. Have you anything like this left to sell? "Please" PM me with some contact info and I'll be right on it,(I actually need a few things).

Michael

Michael, I have the complete seat tracks for 40.00 plus shipping. PM sent

[deezilboy]

Will take the interior door handles if chrome is nice with no pitting. 2 window crank, 2 door handles. A wiring harness which has fan switch connector plug for a/c. Thanks.

[400smallblock]

tom, ill take take the "rh eyebrow". my shipping info is in a private message to you. please let me know howa and where to send payment. thanks

[HuntUSMC]

Do any of the ashtrays have sliders instead of ball bearings (72)?

May I get a quote for a telescopic antennae and an ashtray to 72758?

Thanks in advance!
Posted via Mobile Device

[tll74]

Originally Posted by Hard_Rain420

I'm looking for a pair of 69-70 amber reflector markers. How much shipped? They have to be in good condition w/o any fading or cracks. I'll have to check I might need two amber pairs.

15.00 for a pair of nice ones. 8.00 shipping.

Originally Posted by cudaman

Tom:
I see this it is an old post, just checking to see if you have a few things left.
1- RH outside door handle with screws
2- 1 window crank handle
3- Windshield washer hose set, Does this come with the rubber groumet

RH outer handle 15.00, window crank handle 2.50, washer hose w/groumet 12.50. 15.00 shipping

Originally Posted by Lazzardkng

If you come across a good outer 70 grill let me know. I have a driver quality one now but need a nice one.
Posted via Mobile Device

Will do.

Originally Posted by 69SCSS

Hey Tom,

Wondering if you have 67-71 BB mounts? I have the stands but I need the other hardware (pad, sleeve, bolt, washers). let me know if you do and what you'd want for them.

Thanks, Al

Sorry just the stands at this time.

Originally Posted by HuntUSMC

Do any of the ashtrays have sliders instead of ball bearings (72)?

May I get a quote for a telescopic antennae and an ashtray to 72758?

Thanks in advance!
Posted via Mobile Device

Yes, I have many of the plastic slide ashtrays. 15.00 with the mount bracket 6.00 shipping.
No antenna right now.

Thanks, Tom

[BIGBLU 72]

Would you do $85 shipped on the 3/4t Booster assembly?
Posted via Mobile Device

[jmorri34]

Do you have a passenger side sun visor with the rod, any color left ythanks Jerry

[yellowGT]

I need a set of taillight lenses with the backup lenses as well. If you have any please let me know.

Also I need some trim pieces from a 72 chevy. I could send you a picture so you know what I'm talking about but they are the thick side molding with the wood grain in the middle.

[54blackhornet]

Tom you in LaGrande tomorrow ? If so bring parts ok...

[Lou Boffa]

Would you have a reservoir for a Saginaw P series power steering pump, 1970 350 C10? and the clamp that holds the hoses to the frame?
Lou

[Chevy Fan Always]

Do you still have the faded heater box on the engine side of the firewall? Non a/c

Mike

[67gmcstepside]

2 GMC 1500 V8 8.00 each
2 GMC 2500 V8 8.00 each

I'll take what ever set is available or which ever is in better condition if they are still available.

Thank you, Don

[Sarge]

I'll take the water pump double pulley and the single grrove crank pulley...also need non A/C heater control if you have it. Thanks, going to 13135 please

[cjohnson6772]

I want one of the vent pulls from pic 3. Not sure if they are side specific, but I need a passenger side Let me know how to pay and I will send it your way.

[CrewCab59]

I'll take the $23.00 71 olive green inside mirror, pm me your payment info.

Thanks

[72cheyenneman]

Do you have any more spark plug heat shields for a 350 motor? Also looking for spark plug retainers. I need the retainers that have 2 spark plug wires running through them (not the ones in the back of the block--only the ones with 2 wires running through the retainer). Thanks, Casey

[cjohnson6772]

I replied to PM with my shipping address. I also asked if you could send me a paypal invoice. I'm still a little new to paypal and that would help a lot. If you will send invoice I will send money and we can get this thing on the way

[Sarge]

I'll take the heater control, non-A/C. Also lmk the price of the two pulleys highlighted earlier...can send paypal ASAP. Thank you. Steve