Finally the headers are fitted and now - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Chevy Fleetside** · 12-03-2007, 10:52 PM

it is time to detail the engine. That is silver duct tape on the headders so I did scratch the bajeebers out of them when putting them in for a test fit. Now I get to pull it all apart again.. Oh the joys of building..

L0WRIDE · 12-03-2007, 11:03 PM

niceeee!!!!

steverino66 · 12-03-2007, 11:23 PM

Curious - looks like you used the rear 2 holes on the frame - have you had any clearance issues with dist. cap at firewall? HEI or points?
Also, looks like your frame may have been trimmed a little at the motor mounts - has it? I ask because I'll be tackling this same install later this winter.

**Chevy Fleetside** · 12-03-2007, 11:58 PM

Quote:

Originally Posted by steverino66

Curious - looks like you used the rear 2 holes on the frame - have you had any clearance issues with dist. cap at firewall? HEI or points?
Also, looks like your frame may have been trimmed a little at the motor mounts - has it? I ask because I'll be tackling this same install later this winter.

You need to look at this thread. I had to cut the firewall to get the engine to sit back farther. http://67-72chevytrucks.com/vboard/s...d.php?t=259536 .. It is an 89 year model bb and has the small HEI distributor. There would be plenty of room for an HEI back there though, it just looks worse in the pictures.. Yes I did trim the frame where the mounts are. That is what the 67-72's are like.

Iron-Butt · 12-05-2007, 02:18 PM

I used those same engine mounts. I used the stock manifolds instead of headers. I did not have any clearance problems with the hei.

04Xrider · 12-05-2007, 06:04 PM

Wow! For a big block, I see more ease at getting to those plugs and header bolts then I have on my small block. Looking good.

jchav62 · 12-05-2007, 06:42 PM

Nice!! Good job...

12-03-2007, 10:52 PM	#1
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,779	Finally the headers are fitted and now it is time to detail the engine. That is silver duct tape on the headders so I did scratch the bajeebers out of them when putting them in for a test fit. Now I get to pull it all apart again.. Oh the joys of building.. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

12-03-2007, 11:03 PM	#2
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Finally the headers are fitted and now niceeee!!!! __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

12-03-2007, 11:23 PM	#3
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	Re: Finally the headers are fitted and now Curious - looks like you used the rear 2 holes on the frame - have you had any clearance issues with dist. cap at firewall? HEI or points? Also, looks like your frame may have been trimmed a little at the motor mounts - has it? I ask because I'll be tackling this same install later this winter.

12-05-2007, 02:18 PM	#5
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: Finally the headers are fitted and now I used those same engine mounts. I used the stock manifolds instead of headers. I did not have any clearance problems with the hei. __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

12-05-2007, 06:04 PM	#6
04Xrider Registered thread killer Join Date: Nov 2006 Location: Cookson, OK. Posts: 349	Re: Finally the headers are fitted and now Wow! For a big block, I see more ease at getting to those plugs and header bolts then I have on my small block. Looking good. __________________ !966 stepside, 350 SB, ZZ-4 roller, Crane roller rockers, 0.030 flat tops, airgap intake, 750 Holley, stainless steel headers, edelbrock SDT mufflers, Mark 8 elec fan, 700R-4, column shift

12-05-2007, 06:42 PM	#7
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Finally the headers are fitted and now Nice!! Good job... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.