engine decode help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

xshadow · 11-15-2007, 06:56 PM

on the front of the engine the number is
v1010zdd can someone help decode it. below the number is ejk but the J could be a U or ?

The heads are 462624. I wanted to find out if there is anything special about the heads. I know there not hump heads, but are they better than the average head...... and what size engine it is...year ect.

xshadow · 11-15-2007, 07:09 PM

Maybe an 1981 corvette engine??

71chevylowrider · 11-15-2007, 07:28 PM

Not sure if you have all the numbers you need, here's where allot of us get the correct info for blocks & heads.

http://www.mortec.com/

myoldchevytruck · 11-15-2007, 07:33 PM

mortec is a great website

xshadow · 11-15-2007, 07:36 PM

I went to this site:
http://www.nastyz28.com/chevy-engine-code-stampings.php

If i'm reading it right it looks like a 1981 engine V= flint 10=october 10= 10th day ZDD=1981 190 hp manual trans 4bbl vette?????????????????????
There is a picture near the bottom that looks like where I got my number from. In the picture it has a number that starts with the V like mine....
What I'm confused about is
On the back of the block on the drivers side there is a place that looks like a vin number stamped on it it would decode it as a 72 1/2 ton pickup balitmore IF it is really a vin number for our trucks stamped ino the back of the block. There is a smooth area kinda oval maybe 2" long with the cce142b....number stamped in it.

xshadow · 11-15-2007, 07:44 PM

The heads look like 75-86 350/400 76cc chamber. Is a 76cc chamber good?

factorystock · 11-15-2007, 08:32 PM

The dd on the block corresponds to a 1969 307 2bbl 200hp.

xshadow · 11-15-2007, 10:56 PM

I see but what would the Z be for? and the heads are for a 75-86?
I was looking at decoding the entire thing...
V.....Flint
10....october
10....10th day
the rest is ZDD??
I see ZDD as 81 350 M/T 190 hp vette?
That would go along with the heads being 1975-1986
I'm only going by what the website looks like so I'm not sure..
would there be any other place on the block that would tell me the date? So I can see if it's dated around 69 or 81?
Over the years the heads could have been changed?

11-15-2007, 06:56 PM	#1
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	engine decode help on the front of the engine the number is v1010zdd can someone help decode it. below the number is ejk but the J could be a U or ? The heads are 462624. I wanted to find out if there is anything special about the heads. I know there not hump heads, but are they better than the average head...... and what size engine it is...year ect. Last edited by xshadow; 11-15-2007 at 10:57 PM.

11-15-2007, 07:09 PM	#2
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: engine decode help Maybe an 1981 corvette engine??

11-15-2007, 07:28 PM	#3
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: engine decode help Not sure if you have all the numbers you need, here's where allot of us get the correct info for blocks & heads. http://www.mortec.com/

11-15-2007, 07:33 PM	#4
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: engine decode help mortec is a great website __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

11-15-2007, 07:36 PM	#5
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: engine decode help I went to this site: http://www.nastyz28.com/chevy-engine-code-stampings.php If i'm reading it right it looks like a 1981 engine V= flint 10=october 10= 10th day ZDD=1981 190 hp manual trans 4bbl vette????????????????????? There is a picture near the bottom that looks like where I got my number from. In the picture it has a number that starts with the V like mine.... What I'm confused about is On the back of the block on the drivers side there is a place that looks like a vin number stamped on it it would decode it as a 72 1/2 ton pickup balitmore IF it is really a vin number for our trucks stamped ino the back of the block. There is a smooth area kinda oval maybe 2" long with the cce142b....number stamped in it. Last edited by xshadow; 11-15-2007 at 07:40 PM.

11-15-2007, 07:44 PM	#6
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: engine decode help The heads look like 75-86 350/400 76cc chamber. Is a 76cc chamber good?

11-15-2007, 08:32 PM	#7
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,369	Re: engine decode help The dd on the block corresponds to a 1969 307 2bbl 200hp.

11-15-2007, 10:56 PM	#8
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: engine decode help I see but what would the Z be for? and the heads are for a 75-86? I was looking at decoding the entire thing... V.....Flint 10....october 10....10th day the rest is ZDD?? I see ZDD as 81 350 M/T 190 hp vette? That would go along with the heads being 1975-1986 I'm only going by what the website looks like so I'm not sure.. would there be any other place on the block that would tell me the date? So I can see if it's dated around 69 or 81? Over the years the heads could have been changed? Last edited by xshadow; 11-15-2007 at 11:47 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.