Parts needed..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FuelCellGuy · 08-12-2006, 05:55 PM

I am in need of a complete steering coupler for a power steering setup. I also need sway bar bushing straps and bushings. THe list grow longer. I will post when I remember what else I need. If you have any of the above, drop me a line. Thanks, Mark

roj2323 · 08-12-2006, 06:20 PM

i can't help ya on the coupler thing but if you get a bushing kit at napa or a simular store they many times come with the metal straps as well.
ondrew

incoma · 08-12-2006, 06:49 PM

if the bushing kit is the same as a rag joint, I know you can get those in the "Help" section at autozone and pepboys for just a few $.

FuelCellGuy · 08-12-2006, 06:51 PM

I need the entire splined section that attaches to the gear box itself. I have two good rag joints but the splined section is for non-power steering gearboxes. Thanks, roj, my local parts store had the bushings only. Later, Mark

billsbowtie · 08-12-2006, 10:00 PM

Can You Get A Pic. Of What You Need And Post It Here.[steering Coupler]

FuelCellGuy · 08-12-2006, 10:21 PM

Here's what I need...

FuelCellGuy · 08-12-2006, 10:22 PM

The first picture shows the front and back side of a non-power steering setup. The second, shows where it goes. Thanks, Mark

billsbowtie · 08-12-2006, 10:53 PM

i don't have any extra's i just have the ones on my steering boxes. i thought it was part of the steering colum that you needed sorry.

FuelCellGuy · 08-13-2006, 01:06 AM

Ttt!!!

jay_shy · 08-13-2006, 08:45 AM

Try the bottom middle of the following link...

http://www.truckandcarshop.com/trucks60_72/t60_106.html

Jason

FuelCellGuy · 08-13-2006, 11:14 AM

Thanks!!!

08-12-2006, 05:55 PM	#1
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Parts needed..... I am in need of a complete steering coupler for a power steering setup. I also need sway bar bushing straps and bushings. THe list grow longer. I will post when I remember what else I need. If you have any of the above, drop me a line. Thanks, Mark

08-12-2006, 06:20 PM	#2
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: Parts needed..... i can't help ya on the coupler thing but if you get a bushing kit at napa or a simular store they many times come with the metal straps as well. ondrew

08-12-2006, 06:49 PM	#3
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Parts needed..... if the bushing kit is the same as a rag joint, I know you can get those in the "Help" section at autozone and pepboys for just a few $. __________________ "Green Monster" (Red Sox fan) 1970 GMC survivor, 350/200 4R, 3.42 rear gears, 2.5/4 drop, ECE disc brake conversion, powder coated suspension

08-12-2006, 06:51 PM	#4
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Parts needed..... I need the entire splined section that attaches to the gear box itself. I have two good rag joints but the splined section is for non-power steering gearboxes. Thanks, roj, my local parts store had the bushings only. Later, Mark

08-12-2006, 10:00 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Parts needed..... Can You Get A Pic. Of What You Need And Post It Here.[steering Coupler]

08-12-2006, 10:21 PM	#6
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Parts needed..... Here's what I need... Attached Images

08-12-2006, 10:22 PM	#7
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Parts needed..... The first picture shows the front and back side of a non-power steering setup. The second, shows where it goes. Thanks, Mark

08-12-2006, 10:53 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Parts needed..... i don't have any extra's i just have the ones on my steering boxes. i thought it was part of the steering colum that you needed sorry.

08-13-2006, 01:06 AM	#9
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Parts needed..... Ttt!!!

08-13-2006, 08:45 AM	#10
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Parts needed..... Try the bottom middle of the following link... http://www.truckandcarshop.com/trucks60_72/t60_106.html Jason

08-13-2006, 11:14 AM	#11
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Parts needed..... Thanks!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.