Floor Light Stays On - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76/85 Truck · 01-01-2012, 12:28 PM

Last night I went out to my truck and I noticed the floor light was on, so I opened the door and tried turning the headlight knob, no luck. I put brand new door jamb switches in last year, but I pulled both sides out and checked them, no luck.

I pulled the Horn/Dome light fuse, and the floor light STILL stayed on. For now, I pulled the bulb out.

Any suggestions?

Thanks!

76/85 Truck · 01-01-2012, 02:09 PM

I just went out and disconnected the headlight switch wires, and the light is still on.... The only way to get this light to turn off is to remove it. Any ideas? Any help is greatly appreciated.

54Caddy · 01-01-2012, 02:25 PM

double check that fuse. I know if my dash lights dont work then my floor and dome light will come on but not turn off.

76/85 Truck · 01-01-2012, 02:30 PM

Fuse looks great. The fuse for the Horn is the same fuse, correct? With the fuse in or pulled out the lights are still on.

Thanks!

54Caddy · 01-01-2012, 02:49 PM

what about the fuse for the cig lighter, not sure but i think they share the same common power. might be shorted to ground

76/85 Truck · 01-01-2012, 03:39 PM

Whelp that was easy. It was shorted out and grounding itself. The orange and white wires that travel up to the dome light were completely burnt in half and were touching the floor. The wires are really stiff and plastic-like. I just rewired it and everything works like it should. Thanks for your advice!

54Caddy · 01-01-2012, 04:24 PM

no problem man. those orange and white wires have a connector to the dome light also so you could do majority of the wiring before the connector to avoid any further issues. Glad i could be some sort of help

01-01-2012, 12:28 PM	#1
76/85 Truck Registered User Join Date: Jun 2010 Location: Libby, MT Posts: 163	Floor Light Stays On Last night I went out to my truck and I noticed the floor light was on, so I opened the door and tried turning the headlight knob, no luck. I put brand new door jamb switches in last year, but I pulled both sides out and checked them, no luck. I pulled the Horn/Dome light fuse, and the floor light STILL stayed on. For now, I pulled the bulb out. Any suggestions? Thanks! __________________ Rich My first truck!! 1976 Chevy 3/4 ton Camper Special and a 1985 GMC body. Has a 350, 4 BBL Edelbrock, with a Turbo 350, and NP205 T-case.

01-01-2012, 02:09 PM	#2
76/85 Truck Registered User Join Date: Jun 2010 Location: Libby, MT Posts: 163	Re: Floor Light Stays On I just went out and disconnected the headlight switch wires, and the light is still on.... The only way to get this light to turn off is to remove it. Any ideas? Any help is greatly appreciated. __________________ Rich My first truck!! 1976 Chevy 3/4 ton Camper Special and a 1985 GMC body. Has a 350, 4 BBL Edelbrock, with a Turbo 350, and NP205 T-case.

01-01-2012, 02:25 PM	#3
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Floor Light Stays On double check that fuse. I know if my dash lights dont work then my floor and dome light will come on but not turn off. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-01-2012, 02:30 PM	#4
76/85 Truck Registered User Join Date: Jun 2010 Location: Libby, MT Posts: 163	Re: Floor Light Stays On Fuse looks great. The fuse for the Horn is the same fuse, correct? With the fuse in or pulled out the lights are still on. Thanks! __________________ Rich My first truck!! 1976 Chevy 3/4 ton Camper Special and a 1985 GMC body. Has a 350, 4 BBL Edelbrock, with a Turbo 350, and NP205 T-case.

01-01-2012, 02:49 PM	#5
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Floor Light Stays On what about the fuse for the cig lighter, not sure but i think they share the same common power. might be shorted to ground __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-01-2012, 03:39 PM	#6
76/85 Truck Registered User Join Date: Jun 2010 Location: Libby, MT Posts: 163	Re: Floor Light Stays On Whelp that was easy. It was shorted out and grounding itself. The orange and white wires that travel up to the dome light were completely burnt in half and were touching the floor. The wires are really stiff and plastic-like. I just rewired it and everything works like it should. Thanks for your advice! __________________ Rich My first truck!! 1976 Chevy 3/4 ton Camper Special and a 1985 GMC body. Has a 350, 4 BBL Edelbrock, with a Turbo 350, and NP205 T-case.

01-01-2012, 04:24 PM	#7
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Floor Light Stays On no problem man. those orange and white wires have a connector to the dome light also so you could do majority of the wiring before the connector to avoid any further issues. Glad i could be some sort of help __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.