Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PR454SS · 04-16-2004, 01:20 PM

anyone need any of this before I scrap it. I need to get it out of the way. I will ship small parts, larger stuff is too much of a problem.

71GMCStepside · 04-16-2004, 01:21 PM

Do you have all four of those ralley's?

PR454SS · 04-16-2004, 01:22 PM

2

PR454SS · 04-16-2004, 01:22 PM

intake and carb: sold

PR454SS · 04-16-2004, 01:23 PM

Quote:

Originally posted by 71GMCStepside
Do you have all four of those ralley's?

Yes I do but they are not in great shape.

71GMCStepside · 04-16-2004, 01:24 PM

It'd probably cost a fortune to ship anyway. Hey, do you have all four of the beauty rings?

PR454SS · 04-16-2004, 01:26 PM

Those are what is not very good is the rings. on a side note I just shipped a wheel to Austin and it was $16.92, so shipping is kinda expensive on heavy stuff.

71GMCStepside · 04-16-2004, 01:27 PM

Okay, thanks anyway...by the way, you selling the pry bar?? heehee

PR454SS · 04-16-2004, 01:29 PM

8t5Silverado · 04-16-2004, 02:17 PM

I would be interested in two rally wheels. PM'd you.

meathead95 · 04-16-2004, 03:16 PM

how much for all 4 rally's?

PR454SS · 04-16-2004, 03:52 PM

Engine sold

**1970 CST Short Wide** · 04-16-2004, 04:19 PM

Is that a 3 speed trans?? I need the linkage if it is. How much and ship to 94565
Thanks

71on20s · 04-16-2004, 05:04 PM

is that a short frame or long and how much if it is short thnks ed

dallas71 · 04-16-2004, 06:46 PM

how much for the front bumper brackets???? also interested in the buckets for the front turning signals (parklight)

PR454SS · 04-17-2004, 01:31 AM

71on20's it is a long frame.
Dallas71 you need the same parts I did as that is the only things I kept.

highboy_04 · 04-17-2004, 02:11 AM

what tranny is it?

PR454SS · 04-17-2004, 09:06 AM

it's a 3 speed

highboy_04 · 04-17-2004, 12:48 PM

how much would you want for it?

PR454SS · 04-17-2004, 02:14 PM

I'm not sure it would be cost effective to ship to Kansas you would probably be better off getting one locally. I also can't tell you a thing about it internally.

spencra · 04-17-2004, 03:44 PM

Do you have the rear bumper brackets? If so, how much are you looking to get for them?

Thanks,
Larry

PR454SS · 04-18-2004, 12:42 AM

Don't have any rear brackets sorry

04-16-2004, 01:20 PM	#1
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Parts anyone need any of this before I scrap it. I need to get it out of the way. I will ship small parts, larger stuff is too much of a problem. __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

04-16-2004, 01:21 PM	#2
71GMCStepside Gettin' there Join Date: Mar 2004 Location: Houston (Richmond) Posts: 106	Do you have all four of those ralley's? __________________ [/B]71 Chevy Short Step - Ground Up Restoration In The Works, If I Live That Long...

04-16-2004, 01:22 PM	#3
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	2 __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

04-16-2004, 01:22 PM	#4
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	intake and carb: sold __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

04-16-2004, 01:24 PM	#6
71GMCStepside Gettin' there Join Date: Mar 2004 Location: Houston (Richmond) Posts: 106	It'd probably cost a fortune to ship anyway. Hey, do you have all four of the beauty rings? __________________ [/B]71 Chevy Short Step - Ground Up Restoration In The Works, If I Live That Long...

04-16-2004, 01:26 PM	#7
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Those are what is not very good is the rings. on a side note I just shipped a wheel to Austin and it was $16.92, so shipping is kinda expensive on heavy stuff. __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

04-16-2004, 01:27 PM	#8
71GMCStepside Gettin' there Join Date: Mar 2004 Location: Houston (Richmond) Posts: 106	Okay, thanks anyway...by the way, you selling the pry bar?? heehee __________________ [/B]71 Chevy Short Step - Ground Up Restoration In The Works, If I Live That Long...

04-16-2004, 01:29 PM	#9
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	__________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

04-16-2004, 02:17 PM	#10
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	I would be interested in two rally wheels. PM'd you. __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

04-16-2004, 03:16 PM	#11
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	how much for all 4 rally's? __________________ 72 2wd blazer 72 swb 4x4

04-16-2004, 03:52 PM	#12
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Engine sold __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

04-16-2004, 04:19 PM	#13
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	Is that a 3 speed trans?? I need the linkage if it is. How much and ship to 94565 Thanks __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

04-16-2004, 05:04 PM	#14
71on20s Registered User Join Date: Jan 2004 Location: Houston, TX Posts: 52	frame is that a short frame or long and how much if it is short thnks ed

04-16-2004, 06:46 PM	#15
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	how much for the front bumper brackets???? also interested in the buckets for the front turning signals (parklight)

04-17-2004, 01:31 AM	#16
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	71on20's it is a long frame. Dallas71 you need the same parts I did as that is the only things I kept. __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs



Register or Log In To remove these advertisements.

04-17-2004, 02:11 AM	#17
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	what tranny is it? __________________ '67 c10 350/th350

04-17-2004, 09:06 AM	#18
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	it's a 3 speed __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

04-17-2004, 12:48 PM	#19
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	how much would you want for it? __________________ '67 c10 350/th350

04-17-2004, 02:14 PM	#20
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	I'm not sure it would be cost effective to ship to Kansas you would probably be better off getting one locally. I also can't tell you a thing about it internally. __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

04-17-2004, 03:44 PM	#21
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Do you have the rear bumper brackets? If so, how much are you looking to get for them? Thanks, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

04-18-2004, 12:42 AM	#22
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	Don't have any rear brackets sorry __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

Register or Log In To remove these advertisements.