One BB and 18 SB for sale!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-16-2004, 09:16 PM

NO SHIPPING!!!!!!!!!!!!!!!!!!!!!
Nine 350's block #3970010 $100 each
two 350's #3970014 $100 each
one 350 #14016379 $100 each
one 350 #14010207 $100 each
One 350 and tranny #3956618 $200
One 454 block and bottom end #3999289 $150, I got 10 sets of BB heads too
One 283 3896944 $150
One 283 #3789935 $150
One 283 #3731548 $400
One 400 SB #3951511 $150
I alos got about 20 sets of SB heads
If interested I can get the #'s off the front side of blocks.
I'll deal with you if you buy more than one!!!!!!
Thanks Randy

teeitup · 04-16-2004, 09:16 PM

400

teeitup · 04-16-2004, 09:17 PM

454

teeitup · 04-16-2004, 09:20 PM

283 or 327????

teeitup · 04-16-2004, 09:20 PM

390 Ford and a Mopar ???? $100 each

teeitup · 04-16-2004, 09:22 PM

10 more SB 307's, 305's, 267's, $50 each

**too much stuff** · 04-16-2004, 10:12 PM

The one you are unsure of looks like a 1957 283 car or truck. My book says no side motor mounts?
Randy, i didn't get a chance to get the eis book yet, will try this weekend. Eric

teeitup · 04-16-2004, 10:14 PM

Thanks Eric!!!! Hey where are the block #'s on mopar motors?

**too much stuff** · 04-16-2004, 10:28 PM

Depends on the year, if it is a big block, (distributor in front) There will be a flat spot that has the cubic inches stamped right on there.( next to dist.) Small blocks i don't know cuz they aren't big enough for me. Some also had a # stamped down by the starter. Small block has dist in rear like a chev. Hope this helps.

**JDL** · 04-16-2004, 11:48 PM

sent PM

44th Miss Inf · 04-17-2004, 12:50 AM

Any BBC closed chambered heads? If so, casting numbers, and how much?

highboy_04 · 04-17-2004, 01:09 AM

are any of them runners?

teeitup · 04-17-2004, 06:07 AM

Jim, pm'd you back
44th, none here
Highboy, they were all out of the trucks when I got them. I wish I knew if they ran or not they'd bring more than what I'm asking.
Thanks Randy

ACES · 04-17-2004, 06:08 AM

Hey, Is anyone with a running truck going through KC to Randy's?
I need someone to transport an engine there and back for me. I'd be willing to put up some gas money and conversation on the ride down.

teeitup · 04-17-2004, 06:11 AM

I still have that other 454 and 400 tranny in that wrecked truck if interested in it still.

ACES · 04-17-2004, 07:53 AM

I really really want to, but my wallet keeps saying that I can't pay for gas for a 454.
You have any pics of the 454 and tranny?

and how early do you get up in the morning?

Tim Cline · 04-17-2004, 09:24 AM

The one with No side motor mounts could only be a 55,56 265 or 57 283. Very hard to come by and rare and the begining of a long line of fine engines.

highboy_04 · 04-17-2004, 12:47 PM

how much does a running 454 usually cost?

teeitup · 04-17-2004, 03:18 PM

Aces, I got the truck here I can get pics of motor, you can't see it very good though.
Tim, THANKS I'll probably keep it for the swap meet than.
Highboy, $400-$500 atleast around here
Thanks Randy

teeitup · 04-18-2004, 08:00 AM

Here ya go Aces, TTT for you

68 Suburban · 04-18-2004, 08:20 AM

Randy, Is that 400 engine still available? If it is, could you get the numers of the front pad? Do you have any clue if it has been bored? If everything works out, I would be going through MO at the end of May, and I could pick it up.

Thanks, Christopher

teeitup · 04-18-2004, 05:35 PM

Christopher, I'll get the #'s tomorrow, I don't know anything about the motor, its just the way I got it. Thanks Randy

teeitup · 04-19-2004, 10:36 PM

Here is the # Christopher TO815CGR, thanks Randy

68 Suburban · 04-20-2004, 11:58 AM

Quote:

Originally posted by teeitup
Here is the # Christopher TO815CGR, thanks Randy

Randy, thanks for the info. I will have to see if I have room when I head up at the end of May. By no means hold up a sale waiting on me. Here is the info from those numbers:

1970 CGR 400 manual trans. - 265 2 full size/truck

teeitup · 04-22-2004, 11:41 PM

TTTTTTTT

04-16-2004, 09:16 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	400 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-16-2004, 09:20 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	283 or 327???? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-16-2004, 09:20 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	390 Ford and a Mopar ???? $100 each __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-16-2004, 09:22 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	10 more SB 307's, 305's, 267's, $50 each __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-16-2004, 10:12 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	info The one you are unsure of looks like a 1957 283 car or truck. My book says no side motor mounts? Randy, i didn't get a chance to get the eis book yet, will try this weekend. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-16-2004, 09:16 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	One BB and 18 SB for sale!!!!! NO SHIPPING!!!!!!!!!!!!!!!!!!!!! Nine 350's block #3970010 $100 each two 350's #3970014 $100 each one 350 #14016379 $100 each one 350 #14010207 $100 each One 350 and tranny #3956618 $200 One 454 block and bottom end #3999289 $150, I got 10 sets of BB heads too One 283 3896944 $150 One 283 #3789935 $150 One 283 #3731548 $400 One 400 SB #3951511 $150 I alos got about 20 sets of SB heads If interested I can get the #'s off the front side of blocks. I'll deal with you if you buy more than one!!!!!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-17-2004 at 10:39 PM.

04-16-2004, 09:17 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	454 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-16-2004, 10:14 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Thanks Eric!!!! Hey where are the block #'s on mopar motors? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-16-2004, 10:28 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Depends on the year, if it is a big block, (distributor in front) There will be a flat spot that has the cubic inches stamped right on there.( next to dist.) Small blocks i don't know cuz they aren't big enough for me. Some also had a # stamped down by the starter. Small block has dist in rear like a chev. Hope this helps. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-16-2004, 11:48 PM	#10
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,839	sent PM __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

04-17-2004, 12:50 AM	#11
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 671	Any BBC closed chambered heads? If so, casting numbers, and how much?

04-17-2004, 01:09 AM	#12
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	are any of them runners? __________________ '67 c10 350/th350

04-17-2004, 06:07 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Jim, pm'd you back 44th, none here Highboy, they were all out of the trucks when I got them. I wish I knew if they ran or not they'd bring more than what I'm asking. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-17-2004, 06:08 AM	#14
ACES Life is a gamble Join Date: Oct 2003 Location: Lee's Summit, MO Posts: 796	Hey, Is anyone with a running truck going through KC to Randy's? I need someone to transport an engine there and back for me. I'd be willing to put up some gas money and conversation on the ride down. __________________ 1970 Orange CST C-10 w/350, posi, Longbed The torpid artist seeks inspiration at any cost, by virtue or by vice, by friend or by fiend, by prayer or by wine. -- Ralph Waldo Emerson

04-17-2004, 06:11 AM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I still have that other 454 and 400 tranny in that wrecked truck if interested in it still. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

04-17-2004, 07:53 AM	#16
ACES Life is a gamble Join Date: Oct 2003 Location: Lee's Summit, MO Posts: 796	Engine I really really want to, but my wallet keeps saying that I can't pay for gas for a 454. You have any pics of the 454 and tranny? and how early do you get up in the morning? __________________ 1970 Orange CST C-10 w/350, posi, Longbed The torpid artist seeks inspiration at any cost, by virtue or by vice, by friend or by fiend, by prayer or by wine. -- Ralph Waldo Emerson

04-17-2004, 09:24 AM	#17
Tim Cline Registered User Join Date: Jan 2004 Location: North East Alabama Posts: 47	The one with No side motor mounts could only be a 55,56 265 or 57 283. Very hard to come by and rare and the begining of a long line of fine engines. __________________ 67 GMC SWB Project:60 4BM 350 4SPD 67 Chevy C10 Custom LWB V8 Project 69 LWB IL6 3 on tree project 71 SWB Frame off project 72 LWB C10 Factory Tilt Project.

04-17-2004, 12:47 PM	#18
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	how much does a running 454 usually cost? __________________ '67 c10 350/th350

04-17-2004, 03:18 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Aces, I got the truck here I can get pics of motor, you can't see it very good though. Tim, THANKS I'll probably keep it for the swap meet than. Highboy, $400-$500 atleast around here Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-18-2004, 08:00 AM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Here ya go Aces, TTT for you __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-18-2004, 08:20 AM	#21
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Randy, Is that 400 engine still available? If it is, could you get the numers of the front pad? Do you have any clue if it has been bored? If everything works out, I would be going through MO at the end of May, and I could pick it up. Thanks, Christopher __________________ Just sitting here contemplating contemplation.

04-18-2004, 05:35 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Christopher, I'll get the #'s tomorrow, I don't know anything about the motor, its just the way I got it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2004, 10:36 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Here is the # Christopher TO815CGR, thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-22-2004, 11:41 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	TTTTTTTT __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.