2 intakes, tires, custom bumper, 15x10's, Holley

[Destructo]

Got a few parts laying around that I could stand to get rid of.

1. Edelbrock Torker II Intake manifold, was on 350 which ran great when intake was pulled, reason taken off was for emissions. $50

2. Factory GM Aluminum intake manifold with EGR provisions, not sure what its off of, is for a Small Block and was on my 350, back left carb bolt hole had some threads stripped but a longer bolt solved the problem, reason removed was for a better intake, worked great while on my 350. $50

3. Set of 4 31x10.5x15" Hoosier Radial D/T mud tires, 16/32nds tread left and no bad wear patterns, all have even tread. $200

4. Custom off-road bumper with side guards, is made from two peices of 2x2 .120 wall tubing in the rear and 2" tube .120 wall side guards, also has a 2" receiver built into the middle which is recessed flush with the outside of the bumper. $250 or trade for nice chrome step bumper.

5. Set of 6x5.5 lug chrome blade wheels, have some rust and paint in middle is peeling and some rust. $75

6. Older model 4160 Holley 600 cfm carb, has manual choke and vacuum secondaries, ran ok but should probably be rebuilt, its got the classic finish. $50

Will ship the intake manifolds, prefer not to ship the other stuff but may be willing to work something out.