fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nick's683/4 · 04-26-2004, 02:11 AM

Hey, im looking for 1968 chevy fenders

ljbear · 04-26-2004, 10:00 AM

What condition are you after? I have set in Grass Valley

**jerry moss** · 04-26-2004, 10:30 AM

HEY NICK,
good to see you on here, a buddy of mine told me about a 71 or 72 3/4 ton 2wd that is being given away. he's supposed to look at it today or tomorrow and let me know the condition. it sounds like something you can use to build your 68 or maybe it'll be descent enough to build, i'll let you know as soon as i find out something. later.

**jerry moss** · 04-26-2004, 07:24 PM

TTT

Nick's683/4 · 04-27-2004, 12:29 AM

hey larry, i need a left side one with no rust and little dents

Nick's683/4 · 04-27-2004, 01:32 AM

Hey jerry, that would be great if you can get me that truck for me. Are doors off of a 72 pickup the same as 68 or id there a differnt body line?

**jerry moss** · 04-27-2004, 10:15 AM

outside is the same, 72's used a molded plastic door panel compared to a flat panel 67-71, internal parts are different - window regulator and door latch. i didn't hear anything on the truck yesterday so should find out today.

DMAN · 04-27-2004, 11:21 AM

Jerry, you wouldn't happen to know where I could pick up a clean drivers' side fender for my '71? Or a nice tailgate?. Thanks.

DMAN

DMAN · 04-27-2004, 04:07 PM

What does the other side look like? Is it bowed? What about dents or rust?
DMAN

Nick's683/4 · 04-27-2004, 04:44 PM

Hey jerry, do you know if that truck is a short or long bed and did they make any 3/4 ton short beds or are they all just long beds?

DMAN · 04-27-2004, 05:44 PM

Cruiser71, you have a p.m.
DMAN

**jerry moss** · 04-27-2004, 08:45 PM

Nick,
3/4 tons are longbeds or longhorns.

DMAN, a buddy of mine has a nice gate off a blazer, i'll see what he wants for it if you're interested.

DMAN · 04-27-2004, 08:48 PM

yes I'm interested. let me know.
DMAN

**jerry moss** · 04-27-2004, 10:43 PM

DMAN,
he will bring it down to me this weekend-- i haven't seen it yet. he's asking $175.00 for it. he's pretty fussy about his parts and said he wouldn't hesitate to use it if he was building a fleetside so i'm assuming it's a nice piece.

Nick's683/4 · 04-28-2004, 12:18 AM

hey jerry, have you heard anything on that 71-72 pickup yet?

**jerry moss** · 04-28-2004, 10:20 AM

Nick,
nothing yet, if i don't hear something today, i'll call him.

DMAN · 04-28-2004, 03:00 PM

Quote:

Originally posted by jerry moss
DMAN,
he will bring it down to me this weekend-- i haven't seen it yet. he's asking $175.00 for it. he's pretty fussy about his parts and said he wouldn't hesitate to use it if he was building a fleetside so i'm assuming it's a nice piece.

Sounds good,let me know when you get it.I'll leave my phone # in your mail box. DMAN

Nick's683/4 · 04-28-2004, 09:39 PM

Hey jerry, what do you think a 71-72 3/4 2wd with a stock 402 big block is worth? There is not a lot of rust and body isnt that bad.

**jerry moss** · 04-29-2004, 09:13 AM

Nick,
i'd have to see it, options make a big difference. i'm supposed to find out about the other one today, he's been busy and hasn't had a chance to go look at it.

**jerry moss** · 04-29-2004, 09:14 AM

DMAN,
i'll call you as soon as i get it

Nick's683/4 · 04-30-2004, 12:33 AM

Hey Jerry, on the front of my truck it has all the 3/4 ton suspension. What would you have to do to put 1/2 ton stuff on it. Like the 5 or 6 lug. Whould a 73 + suspension fit?

DMAN · 04-30-2004, 01:32 AM

Quote:

Originally posted by jerry moss
DMAN,
i'll call you as soon as i get it

sounds good.

Nick's683/4 · 05-01-2004, 01:33 PM

TTT

**jerry moss** · 05-01-2004, 07:14 PM

Nick,
i talked to him last night, he went and looked at it yesterday. the owner wasn't home so he left his number and will let me know as soon as he hears something. it is a disc brake truck (71-72) but has rust.

Nick's683/4 · 05-04-2004, 11:41 PM

Jerry, have you heard anything about that 71-72 pickup?

04-26-2004, 02:11 AM	#1
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	fenders Hey, im looking for 1968 chevy fenders

04-26-2004, 10:00 AM	#2
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	What condition are you after? I have set in Grass Valley __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

04-26-2004, 10:30 AM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	HEY NICK, good to see you on here, a buddy of mine told me about a 71 or 72 3/4 ton 2wd that is being given away. he's supposed to look at it today or tomorrow and let me know the condition. it sounds like something you can use to build your 68 or maybe it'll be descent enough to build, i'll let you know as soon as i find out something. later. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-26-2004, 07:24 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	TTT TTT __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-27-2004, 12:29 AM	#5
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	hey larry, i need a left side one with no rust and little dents __________________ 70 1 ton with a 454 and a 4 speed and a np205

04-27-2004, 01:32 AM	#6
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Hey jerry, that would be great if you can get me that truck for me. Are doors off of a 72 pickup the same as 68 or id there a differnt body line? __________________ 70 1 ton with a 454 and a 4 speed and a np205

04-27-2004, 10:15 AM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	outside is the same, 72's used a molded plastic door panel compared to a flat panel 67-71, internal parts are different - window regulator and door latch. i didn't hear anything on the truck yesterday so should find out today. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-27-2004, 11:21 AM	#8
DMAN Registered User Join Date: May 2002 Location: Benicia,Ca. Posts: 128	Jerry, you wouldn't happen to know where I could pick up a clean drivers' side fender for my '71? Or a nice tailgate?. Thanks. DMAN __________________ '71 Custom Deluxe K10, shortbed, fleetside.

04-27-2004, 04:07 PM	#9
DMAN Registered User Join Date: May 2002 Location: Benicia,Ca. Posts: 128	What does the other side look like? Is it bowed? What about dents or rust? DMAN __________________ '71 Custom Deluxe K10, shortbed, fleetside.

04-27-2004, 04:44 PM	#10
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Hey jerry, do you know if that truck is a short or long bed and did they make any 3/4 ton short beds or are they all just long beds? __________________ 70 1 ton with a 454 and a 4 speed and a np205

04-27-2004, 05:44 PM	#11
DMAN Registered User Join Date: May 2002 Location: Benicia,Ca. Posts: 128	Cruiser71, you have a p.m. DMAN __________________ '71 Custom Deluxe K10, shortbed, fleetside.

04-27-2004, 08:45 PM	#12
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	Nick, 3/4 tons are longbeds or longhorns. DMAN, a buddy of mine has a nice gate off a blazer, i'll see what he wants for it if you're interested. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-27-2004, 08:48 PM	#13
DMAN Registered User Join Date: May 2002 Location: Benicia,Ca. Posts: 128	yes I'm interested. let me know. DMAN __________________ '71 Custom Deluxe K10, shortbed, fleetside.

04-27-2004, 10:43 PM	#14
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	DMAN, he will bring it down to me this weekend-- i haven't seen it yet. he's asking $175.00 for it. he's pretty fussy about his parts and said he wouldn't hesitate to use it if he was building a fleetside so i'm assuming it's a nice piece. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-28-2004, 12:18 AM	#15
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	hey jerry, have you heard anything on that 71-72 pickup yet? __________________ 70 1 ton with a 454 and a 4 speed and a np205



Register or Log In To remove these advertisements.

04-28-2004, 10:20 AM	#16
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	Nick, nothing yet, if i don't hear something today, i'll call him. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-28-2004, 09:39 PM	#18
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Hey jerry, what do you think a 71-72 3/4 2wd with a stock 402 big block is worth? There is not a lot of rust and body isnt that bad. __________________ 70 1 ton with a 454 and a 4 speed and a np205

04-29-2004, 09:13 AM	#19
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	Nick, i'd have to see it, options make a big difference. i'm supposed to find out about the other one today, he's been busy and hasn't had a chance to go look at it. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-29-2004, 09:14 AM	#20
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	DMAN, i'll call you as soon as i get it __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-30-2004, 12:33 AM	#21
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Hey Jerry, on the front of my truck it has all the 3/4 ton suspension. What would you have to do to put 1/2 ton stuff on it. Like the 5 or 6 lug. Whould a 73 + suspension fit? __________________ 70 1 ton with a 454 and a 4 speed and a np205

05-01-2004, 01:33 PM	#23
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	TTT __________________ 70 1 ton with a 454 and a 4 speed and a np205

05-01-2004, 07:14 PM	#24
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	Nick, i talked to him last night, he went and looked at it yesterday. the owner wasn't home so he left his number and will let me know as soon as he hears something. it is a disc brake truck (71-72) but has rust. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

05-04-2004, 11:41 PM	#25
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Jerry, have you heard anything about that 71-72 pickup?

Register or Log In To remove these advertisements.