67 GMC power assist ram bracket!? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dhavest68 · 05-03-2004, 04:24 AM

Hello everyone,
Looks like this is my last resort of finding yet a parts for my 67 GMC, I must have gone through almost every

boneyard around here in seattle/everett area and still hoping. Is anyone know where I can find a steering stabilizer bracket with resonable price (older power stering set-up," i was told") for my 67 GMC 3/4 ton custom pick-up?

any suggestion on how to fix/modify this if i can't find replacement part?. Appreciate all the help and thank you for looking, Dave

walker · 05-03-2004, 09:47 PM

Get hold of TEEITUP. He has a tremendous amount of parts and knowledge.

teeitup · 05-03-2004, 11:28 PM

THANKS Andy!!!
Yes I have 2 set ups out there, I'll look Tuesday evening and see if the bracket is on one of them.
Thanks Randy

dhavest68 · 05-04-2004, 12:38 AM

Thanks Andy/Walker! Teeitup, let me know if you find one

... later, dhavest

**Chevy4Life** · 05-04-2004, 01:13 PM

If Teeitup can't find one, I have one that came off my '67. It bolts up inside the drivers side frame rail. Correct?

dhavest68 · 05-05-2004, 12:52 AM

That's exactly right, as you can see it in the picture that i posted ( lower part broken off) .Was it still in one piece, and how much going to seattle,wa.?
Thank you for your reply,
Dave

**Chevy4Life** · 05-05-2004, 01:29 PM

I'll give teeitup a chance to round one up first. I'm headed up to Utah today (were my truck is curently sitting) so I'll pick it up just in case.

dhavest68 · 05-05-2004, 05:57 PM

chevy4life, looks like teeitup got one for me, but keep it available just in case our deal didn't go through.Thank you much, Dhavest

dhavest68 · 05-13-2004, 06:52 PM

Thanks a whole bunch teeitup for the quick turn around on that bracket i really appreciate it. Need parts for your truck? !! send randy/teeitup a message he's a great guy to boot would not dissappoint. Hands up to everyone who put together this network keep it up.......Dhavest68

Blue67 · 05-14-2004, 10:39 AM

Now that dhavest has his bracket I need one as well. Is there any left out there. I also need to replace or repair the ram and the frame. Can you still buy the ram? Steve

teeitup · 05-14-2004, 03:06 PM

THANKS DAVE!!!
Blue67, I got another bracket and some parts too.
Thanks Randy

Blue67 · 05-14-2004, 03:34 PM

What all do you have and how much? I think I have everything but the ram and the bracket. Steve

teeitup · 05-14-2004, 04:03 PM

Steve, I'm going out there in a bit, I'll get a pic. Thanks Randy

dhavest68 · 05-14-2004, 04:35 PM

blue67, get a hold of chevy4life his got one available and might be able to help you out. I need that ram/stabilazer myself!

Blue67 · 05-14-2004, 04:37 PM

Thanks guys I will check back later!

dhavest68 · 05-14-2004, 04:44 PM

teeitup/ Randy, do you still have that ram/stabilizer that came with that bracket? just found out after installing the bracket that it's about 3 inches short to the bracket.
screwend-bracket broken off and rewelded. if u have any spare let me know.

teeitup · 05-14-2004, 06:13 PM

Here is what I have left, 2 different ones, the one has the bracket gone. I won't be able to check them out till Sunday, I think the one stabilizer is bad. Thanks Randy

Blue67 · 05-15-2004, 08:21 AM

Thats cool. I am getting a bracket from Chevy4life so what I need is the ram. I have a ram that was OK untill the end snaped off. Can these things be rebuilt?

Blue67 · 05-21-2004, 04:08 PM

I still need a ram for my truck. I found a place that can rebuild a used one so let me know if any one has one for sale Thanks Steve

05-03-2004, 04:24 AM	#1
dhavest68 Registered User Join Date: Apr 2004 Location: lynnwood,WA.98036 Posts: 7	67 GMC power assist ram bracket!? Hello everyone, Looks like this is my last resort of finding yet a parts for my 67 GMC, I must have gone through almost every boneyard around here in seattle/everett area and still hoping. Is anyone know where I can find a steering stabilizer bracket with resonable price (older power stering set-up," i was told") for my 67 GMC 3/4 ton custom pick-up? any suggestion on how to fix/modify this if i can't find replacement part?. Appreciate all the help and thank you for looking, Dave Attached Images Last edited by dhavest68; 05-03-2004 at 04:38 AM.

05-03-2004, 09:47 PM	#2
walker Registered User Join Date: Jul 2003 Location: north of Phx AZ about 30 miles Posts: 698	Get hold of TEEITUP. He has a tremendous amount of parts and knowledge. __________________ Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold

05-03-2004, 11:28 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	THANKS Andy!!! Yes I have 2 set ups out there, I'll look Tuesday evening and see if the bracket is on one of them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-14-2004, 03:06 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	THANKS DAVE!!! Blue67, I got another bracket and some parts too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-14-2004, 04:03 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Steve, I'm going out there in a bit, I'll get a pic. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-04-2004, 12:38 AM	#4
dhavest68 Registered User Join Date: Apr 2004 Location: lynnwood,WA.98036 Posts: 7	Thanks Andy/Walker! Teeitup, let me know if you find one ... later, dhavest

05-04-2004, 01:13 PM	#5
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	If Teeitup can't find one, I have one that came off my '67. It bolts up inside the drivers side frame rail. Correct?

05-05-2004, 12:52 AM	#6
dhavest68 Registered User Join Date: Apr 2004 Location: lynnwood,WA.98036 Posts: 7	That's exactly right, as you can see it in the picture that i posted ( lower part broken off) .Was it still in one piece, and how much going to seattle,wa.? Thank you for your reply, Dave

05-05-2004, 01:29 PM	#7
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	I'll give teeitup a chance to round one up first. I'm headed up to Utah today (were my truck is curently sitting) so I'll pick it up just in case.

05-05-2004, 05:57 PM	#8
dhavest68 Registered User Join Date: Apr 2004 Location: lynnwood,WA.98036 Posts: 7	chevy4life, looks like teeitup got one for me, but keep it available just in case our deal didn't go through.Thank you much, Dhavest

05-13-2004, 06:52 PM	#9
dhavest68 Registered User Join Date: Apr 2004 Location: lynnwood,WA.98036 Posts: 7	Thanks a whole bunch teeitup for the quick turn around on that bracket i really appreciate it. Need parts for your truck? !! send randy/teeitup a message he's a great guy to boot would not dissappoint. Hands up to everyone who put together this network keep it up.......Dhavest68

05-14-2004, 10:39 AM	#10
Blue67 Registered User Join Date: May 2003 Location: Wisconsin Posts: 33	Now that dhavest has his bracket I need one as well. Is there any left out there. I also need to replace or repair the ram and the frame. Can you still buy the ram? Steve

05-14-2004, 03:34 PM	#12
Blue67 Registered User Join Date: May 2003 Location: Wisconsin Posts: 33	What all do you have and how much? I think I have everything but the ram and the bracket. Steve

05-14-2004, 04:35 PM	#14
dhavest68 Registered User Join Date: Apr 2004 Location: lynnwood,WA.98036 Posts: 7	bracket blue67, get a hold of chevy4life his got one available and might be able to help you out. I need that ram/stabilazer myself!

05-14-2004, 04:37 PM	#15
Blue67 Registered User Join Date: May 2003 Location: Wisconsin Posts: 33	Thanks guys I will check back later!



Register or Log In To remove these advertisements.

05-14-2004, 04:44 PM	#16
dhavest68 Registered User Join Date: Apr 2004 Location: lynnwood,WA.98036 Posts: 7	teeitup/ Randy, do you still have that ram/stabilizer that came with that bracket? just found out after installing the bracket that it's about 3 inches short to the bracket. screwend-bracket broken off and rewelded. if u have any spare let me know.

05-14-2004, 06:13 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Here is what I have left, 2 different ones, the one has the bracket gone. I won't be able to check them out till Sunday, I think the one stabilizer is bad. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2004, 08:21 AM	#18
Blue67 Registered User Join Date: May 2003 Location: Wisconsin Posts: 33	Thats cool. I am getting a bracket from Chevy4life so what I need is the ram. I have a ram that was OK untill the end snaped off. Can these things be rebuilt?

05-21-2004, 04:08 PM	#19
Blue67 Registered User Join Date: May 2003 Location: Wisconsin Posts: 33	I still need a ram for my truck. I found a place that can rebuild a used one so let me know if any one has one for sale Thanks Steve

Register or Log In To remove these advertisements.