new to this forum and needing info on relocating gas tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mustanglx347 · 05-04-2004, 12:57 PM

Hello all, finally found a good info site for my two trucks (71 chevy stepside swb and 1950 chevy 5 window). I am working on my '71 at the moment and i currently have an RCI fuel cell in the bed but would like to actually relocate a gas tank between the rear frame rails under the bed.

My question is, does anyone make a kit, or can I use a tank out of a blazer or suburban? Is there a tech write up on this project anywhere?

Thanks in advance

sneakysnake · 05-04-2004, 01:24 PM

Theres not much in the "search" since the face lift but.
http://67-72chevytrucks.com/vboard/s...ht=blazer+tank

67chevemall · 05-04-2004, 01:30 PM

Must@$g

Oh boy here we go!

After you sell the F@$d talk to The Fuel Cell Guy!

Putter · 05-04-2004, 01:45 PM

I don't get out much, but does F$#d still make cars? I thought they only made tractors. Oh, on that stepside, you can put the filler cap behind the driver's side marker light...way cool.

MACKL · 05-04-2004, 01:50 PM

Here are a few links to help you decide.

Kenny's Trucks has complete kit. Tank, mounts, and sender. The neck needs to come from a junk yard.
Kenny's Trucks
Kenny has the best price on the blazer tank I have found.

This link will give you some ideas on relocating the fuel filler nozzel.Marker light gas door

Fuel door thread
The thread above did have photos but they were lost in the upgrade.

Hope this helps...

mustanglx347 · 05-04-2004, 02:06 PM

Figured i may catch a little flack for my handle

but, just to let you guys know, the stepside was my first vehicle I ever owned and I have had it for over 17 years( I got it when i was 16). The mustang has a 347 stroker with a 150 shot of nitrous. It is almost done so I thought I would concentrate on my two trucks now.

Anyway, thanks for the replies.

67chevemall · 05-04-2004, 02:08 PM

Hey as long as the trucks will be faster and way more kool then I guess it is OK! I would still change your handle to Chevy#1-71!LOL

68speedalert · 05-04-2004, 02:12 PM

If you go with a new blazer kit, DO NOT get one that is poly or plastic. Get a steel one, you'll have far less problems.

Steve

mustanglx347 · 05-04-2004, 02:33 PM

yeah, should have chosen another username, but this is the one I always use, so its kinda habbit

*dtlilly* · 05-04-2004, 06:16 PM

welcome to the board from Tennessee. Post some pics of the GM.

krue · 05-04-2004, 08:38 PM

Welcome to the board from South Mississippi!

05-04-2004, 01:30 PM	#3
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Must@$g Oh boy here we go! After you sell the F@$d talk to The Fuel Cell Guy! __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

05-04-2004, 01:45 PM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I don't get out much, but does F$#d still make cars? I thought they only made tractors. Oh, on that stepside, you can put the filler cap behind the driver's side marker light...way cool. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

05-04-2004, 01:50 PM	#5
MACKL Almost done! Join Date: Apr 2004 Location: Woodstock GA Posts: 193	Blazer Tank kit Here are a few links to help you decide. Kenny's Trucks has complete kit. Tank, mounts, and sender. The neck needs to come from a junk yard. Kenny's Trucks Kenny has the best price on the blazer tank I have found. This link will give you some ideas on relocating the fuel filler nozzel.Marker light gas door Fuel door thread The thread above did have photos but they were lost in the upgrade. Hope this helps...

05-04-2004, 02:08 PM	#7
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Hey as long as the trucks will be faster and way more kool then I guess it is OK! I would still change your handle to Chevy#1-71!LOL __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

05-04-2004, 02:12 PM	#8
68speedalert Semi-Senior Member Join Date: Feb 2003 Location: Washington, MO Posts: 390	If you go with a new blazer kit, DO NOT get one that is poly or plastic. Get a steel one, you'll have far less problems. Steve __________________ '68 50th Anniversery LWB Custom Fleetside, '77 305 v-8, turbo 350, factory speed alert (still works), '71 drivetrain w/front discs. Some call it ugly yellow, others call it Ochre '83 Jeep CJ-7, <80,000 miles, original owner '04 Chevy Suburban, 4x4, 2500, 6.0 ltr, Predator Diablo programmer '95 GMC K1500 Extended cab

05-04-2004, 12:57 PM	#1
mustanglx347 Registered User Join Date: May 2004 Location: Texas Posts: 44	new to this forum and needing info on relocating gas tank Hello all, finally found a good info site for my two trucks (71 chevy stepside swb and 1950 chevy 5 window). I am working on my '71 at the moment and i currently have an RCI fuel cell in the bed but would like to actually relocate a gas tank between the rear frame rails under the bed. My question is, does anyone make a kit, or can I use a tank out of a blazer or suburban? Is there a tech write up on this project anywhere? Thanks in advance

05-04-2004, 01:24 PM	#2
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Theres not much in the "search" since the face lift but. http://67-72chevytrucks.com/vboard/s...ht=blazer+tank

05-04-2004, 02:06 PM	#6
mustanglx347 Registered User Join Date: May 2004 Location: Texas Posts: 44	Figured i may catch a little flack for my handle but, just to let you guys know, the stepside was my first vehicle I ever owned and I have had it for over 17 years( I got it when i was 16). The mustang has a 347 stroker with a 150 shot of nitrous. It is almost done so I thought I would concentrate on my two trucks now. Anyway, thanks for the replies.

05-04-2004, 02:33 PM	#9
mustanglx347 Registered User Join Date: May 2004 Location: Texas Posts: 44	yeah, should have chosen another username, but this is the one I always use, so its kinda habbit

05-04-2004, 06:16 PM	#10
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	welcome to the board from Tennessee. Post some pics of the GM.

05-04-2004, 08:38 PM	#11
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.