Have truck frame for sale near Memphis, TN - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DBLSPRT68 · 05-12-2004, 04:22 PM

Hello all, I'm in process of switching cabs and beds on my 2 trucks. I need to get rid of my c-10. I will take it to the scrape yard by May 25, if now one wants it. It is a 1983 C-10 LWB dual tank frame. Both 16 gal tanks are there, both front and rear suspension is complete. Very clean and straight. On it now is my 82 c-20 cab and bed, it has some rust, but not too bad. It's mainly for parts, but have title. The left front fender is very nice, the all manual doors are good, and it has a tilt column. Here's the problem, if you want it, you have to come get it. My other truck is not complete yet, and has to be gone by May 28. I'm getting married and lots of family will be here. My yard looks like a small junkyard now, but can't be then. Let me know if anyone is interested, I'm wanting about $150.00 for all. Thanks, David

1986Silverado · 05-14-2004, 05:24 PM

Sent you a private message.

DBLSPRT68 · 05-17-2004, 10:11 PM

Is there anybody out there that needs an almost complete parts truck for $150.00 ???? It's just put together with a few bolts on everything. No motor or trans, but have drive shaft, front and rear bumpers(rear step). I will be sending this to the crusher if it dosen't sell. David

DuckhunterInTN · 05-20-2004, 09:21 AM

is the front bumper chrome?

DBLSPRT68 · 05-20-2004, 10:20 AM

Duckhunter, yes the front bumper is chrome and I have the bumper guards and brackets. It's an 83-87 style, no parking lights. Anything else you need? Let me know. I'm located just off hwy78, could you come pick up? Your about an hour or so away. Let me know. David

DuckhunterInTN · 05-20-2004, 12:37 PM

Is the bumper straight? Chrome good?

does it come with tires and rims? (trying to figure out how I would load it) (I assume it still has and axle, etc)

lastly, what condition is the right front fender in? I've got a smashed one on my K10

DBLSPRT68 · 05-20-2004, 01:14 PM

Duckhunter, the front bumper is very good in chrome. the right fender has a slight bend at the bottom(like the tire ran over something and it came up onto the fender), not bad, just enough to see. I have a total of 4 rims to fit, 2 have descent tires, 1 is blown out and one has no tire. I could get another wheel/tire combo from junkyard or get some used tires, to make it a roller. If you want it, we have to do this quickly. Next wensday May 25, it goes bye bye. If you just want a few parts, we can do that anytime. Let me know. David

DuckhunterInTN · 05-20-2004, 01:27 PM

In order for me to get it, the truck would probably need to be able to roll up onto my trailer.

Are the rims matching? If so, just any cheap used tires that would hold air would work with me.

what color is the truck, btw.

DBLSPRT68 · 05-20-2004, 03:52 PM

Duckhunter, I only have 3 15x8 rallies that are bare. I can put 2 tires on the 1 rally and black spare, to make it a roller. I have 4 very nice 15x8 rallies with trim and lugs, and near new 255/60 r15 tires on them, will sell those for $400. The truck cab and bed was green originally, but was painted a nice lemans blue years ago. I switched the r/h bebside to my other truck and put a dented bedside back on. This truck has a title, but is only put together with a few bolts. The brake lines and fuel lines are off, but has both 16 gal tanks. The rear step bumper is grey, not chrome. Selling as a frame with suspension, and a body sitting on it. You can do whatever you want with that. The cab has some rust around the lower wheatherstriping channel, and spots here and there. The bed has rust at the joints where the floor meets the sides, and now the dented right side. Was a very good looking truck, but didn't have a/c and other things I wanted. It does have a tilt column also. Let me know, If your really interested, I'll send you my phone number/e-mail address, for talk and pictures. Thanks, David

DBLSPRT68 · 05-23-2004, 08:52 AM

Time is running out on this deal. I guess I'm looking at scraping it. David

DuckhunterInTN · 05-24-2004, 08:42 PM

DBLSPRT68,

I just now got back where I have email access. I am still interested in this deal. Could I pick the truck up Wednsday evening or would that be too late? Email me at duckhunter117-at-hotmail.com with your phone number, etc., and I will give you a call (tonight if you are able to email me within the next hour or so)

Thanks!

05-12-2004, 04:22 PM	#1
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Have truck frame for sale near Memphis, TN Hello all, I'm in process of switching cabs and beds on my 2 trucks. I need to get rid of my c-10. I will take it to the scrape yard by May 25, if now one wants it. It is a 1983 C-10 LWB dual tank frame. Both 16 gal tanks are there, both front and rear suspension is complete. Very clean and straight. On it now is my 82 c-20 cab and bed, it has some rust, but not too bad. It's mainly for parts, but have title. The left front fender is very nice, the all manual doors are good, and it has a tilt column. Here's the problem, if you want it, you have to come get it. My other truck is not complete yet, and has to be gone by May 28. I'm getting married and lots of family will be here. My yard looks like a small junkyard now, but can't be then. Let me know if anyone is interested, I'm wanting about $150.00 for all. Thanks, David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

05-14-2004, 05:24 PM	#2
1986Silverado What I drive Join Date: Apr 2004 Location: Star, MS Posts: 418	? Sent you a private message. __________________ 1986 Chevy Crew Cab Dually(Choo-Choo Conversion) 2006 Chevy Equinox

05-17-2004, 10:11 PM	#3
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Is there anybody out there that needs an almost complete parts truck for $150.00 ???? It's just put together with a few bolts on everything. No motor or trans, but have drive shaft, front and rear bumpers(rear step). I will be sending this to the crusher if it dosen't sell. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

05-20-2004, 09:21 AM	#4
DuckhunterInTN Registered User Join Date: Feb 2003 Location: Brownsville, TN Posts: 88	is the front bumper chrome? __________________ 2004 GMC 2500HD 4x4 Crew Cab Duramax 2000 Chevrolet ext-cab Z71 1995 Chevrolet ext-cab Z71 1984 Chevrolet K10 6.2 4x4 1972 GMC Jimmy 4x4 1967 Chevrolet C50 Dump truck 1957 GMC 1/2 ton stepside (not running)

05-20-2004, 10:20 AM	#5
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Duckhunter, yes the front bumper is chrome and I have the bumper guards and brackets. It's an 83-87 style, no parking lights. Anything else you need? Let me know. I'm located just off hwy78, could you come pick up? Your about an hour or so away. Let me know. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

05-20-2004, 12:37 PM	#6
DuckhunterInTN Registered User Join Date: Feb 2003 Location: Brownsville, TN Posts: 88	Is the bumper straight? Chrome good? does it come with tires and rims? (trying to figure out how I would load it) (I assume it still has and axle, etc) lastly, what condition is the right front fender in? I've got a smashed one on my K10 __________________ 2004 GMC 2500HD 4x4 Crew Cab Duramax 2000 Chevrolet ext-cab Z71 1995 Chevrolet ext-cab Z71 1984 Chevrolet K10 6.2 4x4 1972 GMC Jimmy 4x4 1967 Chevrolet C50 Dump truck 1957 GMC 1/2 ton stepside (not running) Last edited by DuckhunterInTN; 05-20-2004 at 12:48 PM.

05-20-2004, 01:14 PM	#7
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Duckhunter, the front bumper is very good in chrome. the right fender has a slight bend at the bottom(like the tire ran over something and it came up onto the fender), not bad, just enough to see. I have a total of 4 rims to fit, 2 have descent tires, 1 is blown out and one has no tire. I could get another wheel/tire combo from junkyard or get some used tires, to make it a roller. If you want it, we have to do this quickly. Next wensday May 25, it goes bye bye. If you just want a few parts, we can do that anytime. Let me know. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

05-20-2004, 01:27 PM	#8
DuckhunterInTN Registered User Join Date: Feb 2003 Location: Brownsville, TN Posts: 88	In order for me to get it, the truck would probably need to be able to roll up onto my trailer. Are the rims matching? If so, just any cheap used tires that would hold air would work with me. what color is the truck, btw. __________________ 2004 GMC 2500HD 4x4 Crew Cab Duramax 2000 Chevrolet ext-cab Z71 1995 Chevrolet ext-cab Z71 1984 Chevrolet K10 6.2 4x4 1972 GMC Jimmy 4x4 1967 Chevrolet C50 Dump truck 1957 GMC 1/2 ton stepside (not running)

05-20-2004, 03:52 PM	#9
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Duckhunter, I only have 3 15x8 rallies that are bare. I can put 2 tires on the 1 rally and black spare, to make it a roller. I have 4 very nice 15x8 rallies with trim and lugs, and near new 255/60 r15 tires on them, will sell those for $400. The truck cab and bed was green originally, but was painted a nice lemans blue years ago. I switched the r/h bebside to my other truck and put a dented bedside back on. This truck has a title, but is only put together with a few bolts. The brake lines and fuel lines are off, but has both 16 gal tanks. The rear step bumper is grey, not chrome. Selling as a frame with suspension, and a body sitting on it. You can do whatever you want with that. The cab has some rust around the lower wheatherstriping channel, and spots here and there. The bed has rust at the joints where the floor meets the sides, and now the dented right side. Was a very good looking truck, but didn't have a/c and other things I wanted. It does have a tilt column also. Let me know, If your really interested, I'll send you my phone number/e-mail address, for talk and pictures. Thanks, David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

05-23-2004, 08:52 AM	#10
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Ttt Time is running out on this deal. I guess I'm looking at scraping it. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

05-24-2004, 08:42 PM	#11
DuckhunterInTN Registered User Join Date: Feb 2003 Location: Brownsville, TN Posts: 88	DBLSPRT68, I just now got back where I have email access. I am still interested in this deal. Could I pick the truck up Wednsday evening or would that be too late? Email me at duckhunter117-at-hotmail.com with your phone number, etc., and I will give you a call (tonight if you are able to email me within the next hour or so) Thanks! __________________ 2004 GMC 2500HD 4x4 Crew Cab Duramax 2000 Chevrolet ext-cab Z71 1995 Chevrolet ext-cab Z71 1984 Chevrolet K10 6.2 4x4 1972 GMC Jimmy 4x4 1967 Chevrolet C50 Dump truck 1957 GMC 1/2 ton stepside (not running)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.