'Nother A/C ?, about the controller - The 1947 - Present Chevrolet & GMC Truck Message Board Network

walker · 05-14-2004, 12:59 AM

I'm getting all the bugs worked out of this a/c slowly but surely. Now I need some controller advice. My current stock a/c controller had the broken lever. I replaced it with the steel lever kit. I was not impressed, but it worked. I would now like to replace the controller with a new one. The new one looks identical except for the vaccum switch. My vac. switch only has two spots for hoses on it, the replacement controller has a vac. switch with a place for three vac hosses on it. Do I just cap one of the three off? Or is there a '67 specific controller with only two vac. hose spots on it?

JimKshortstep4x4 · 05-14-2004, 08:10 AM

Capping the nipple will work fine.

Jim

walker · 05-14-2004, 08:15 PM

Cool! What exactly is the third vacuum nipple for? Water valve maybe???

neonlarry · 05-14-2004, 10:56 PM

Here is an old post with some diagrams.

busterwivell · 05-15-2004, 09:44 AM

Andy, get that AC workin'................it's HOT out

05-14-2004, 12:59 AM	#1
walker Registered User Join Date: Jul 2003 Location: north of Phx AZ about 30 miles Posts: 698	'Nother A/C ?, about the controller I'm getting all the bugs worked out of this a/c slowly but surely. Now I need some controller advice. My current stock a/c controller had the broken lever. I replaced it with the steel lever kit. I was not impressed, but it worked. I would now like to replace the controller with a new one. The new one looks identical except for the vaccum switch. My vac. switch only has two spots for hoses on it, the replacement controller has a vac. switch with a place for three vac hosses on it. Do I just cap one of the three off? Or is there a '67 specific controller with only two vac. hose spots on it? __________________ Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold

05-14-2004, 08:15 PM	#3
walker Registered User Join Date: Jul 2003 Location: north of Phx AZ about 30 miles Posts: 698	Cool! What exactly is the third vacuum nipple for? Water valve maybe??? __________________ Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold

05-14-2004, 10:56 PM	#4
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Here is an old post with some diagrams. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

05-15-2004, 09:44 AM	#5
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Andy, get that AC workin'................it's HOT out __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

05-14-2004, 08:10 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Capping the nipple will work fine. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.