67 Parts For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Crotalus · 05-18-2004, 11:35 PM

1967 GMC Short Frame and Bed w/tailgate (bed has some damage to lower driver side) has optional metal floor that is straight. Have completly rust free 67 Cab, 1 1967 passanger door, other LH and RH door are from a 1972, it comes with rare factory 1pc drive shaft, a 67-8 Chevy core support a GMC core support, a 67 Chevy grille and trim, rolling on 6 lug rallys, im throwing in 6 5 lug rallys, a complete 73 DB crossmember w/ PS and sway bar, At crossmember, 72 5 lug leaf spring housing, 67 hood, 69-72 hood, extra soft ray door glass, some ac parts (cab is non-ac) theres a inst cluster, hood hinges, couple inner fenders, 67 bucket seat frame, door hinges, window regulators, glove box doors, all sorts of misc parts and pieces, 2 sport bumpers, 2-cowl pieces, $900 for everything

I have a set of factory 69-70 bucket seats for a additional

I just want it all gone. Sorry i don't have any pictures off hand, i will not consider shipping, unless you arranged by buyer, i will be more than willing to help load it on a truck or trailer.

swede413 · 05-18-2004, 11:50 PM

Im intrested, is the frame leaf or coil? where in AZ are you?

**diggy** · 05-19-2004, 01:53 AM

in interested in the bed pm'ed you

**fine69** · 05-19-2004, 02:40 AM

Hey DR. By chance do you have an original heater delete plate for the firewall you would sell?

Crotalus · 05-19-2004, 09:03 AM

the frame is a 67 gmc leaf.

diggy i pmed you back-you were interested in the nice floor with bad sides correct?

fine- i need a DR i cant even walk, i have a severe viral infection. I cant even go to work (maybe that parts not so bad) anyhow i have a heater delete setup. i have no idea how much i want, i was going to ebay, to see what it would sell for.. the previous owner drilled 2 holes in it, for the hoses to pass through for AC he had ac but no heat, but thats the most important here in AZ

**fine69** · 05-19-2004, 09:41 AM

Please price me the heater delete, Or if you dont really want to sell i understand. But put me on the top of the list before you Ebay it. Thanks.

Burnsman · 05-19-2004, 01:51 PM

Micah, does it have a good title? I can't believe nobody is snagging this! I'll have to call my trucker and find out how much to ship. Brian

Crotalus · 05-19-2004, 01:56 PM

Fine. I don't have any desire to keep the delete plates. I have the piece for the dash, the firewall plate, it also comes with a radio delete, and lighter delete. Im going to sell it all as a package. I have no idea how much, thats why i was going to try ebay when im mobile again, im not suppose to be driving and doing anything, the doctors have me eating Percocets like they are M&M's to the point where i cannot function or think straight, so i thought id wait to list anything for a little while Unless its stuff to be picked up. I don't like to ship stuff at all, as im honestly very slow . Heck i have been meaning to send my own father a big block bracket for about 2 months. Anyhow, I turned down $125 for the heater setup when i first picked it up. If you still want it make me a reasonable offer. I probably won't say no at this point. My email is arizonaherper@hotmail.com Please try to use email. I dont check the board very often.

68 chevy truck-TPI · 05-19-2004, 09:44 PM

is this a fleet bed truck? do you know how long the drive shaft is? i don't think one-piece drive shafts are odd on short fleet bed trucks. i think they were standard and two-piece was standard on stepbed trucks(different wheelbase).
i might be wrong??

Crotalus · 05-20-2004, 12:34 PM

Ive had several inquiries on how much for the bucket seat and the console alone. I cannot ship them, i will sell them for $200 with console. Im going to put them on ebay with the Buy It Now option, and for pickup within the Phoenix area. Unless someone emails me first.

Crotalus · 05-20-2004, 02:32 PM

UPDATE The 67 has been sold!!! Thanks 72SUPER4x4 can anyone out there point him in the direction of a reliable reasonably priced transportation company or car hauler????? It needs to go from Arizona to New York. Thank you!

Radke · 05-27-2004, 02:25 AM

About the shipping call 800 436 2991 and talk to a guy we call Blacky between 7am and 5pm central time he is a truck broker and maybe can help tell him Steve told you to call Good Luck.

Inspector722 · 06-26-2004, 01:47 AM

Send pics of passenger door and driver door. Mine is a 67. Plus shipping cost Zip 77705.
inspector722@aol.com

Crotalus · 06-27-2004, 03:52 PM

It has been sold, the truck should be leaving around the 28th if not i am forced to get it out of the yard by other means. The city doesn't care for some of my stuff apparently. Sorry i cannot ship any parts. Thank you!

Burnsman · 06-27-2004, 05:15 PM

Micah, if for some reason the deal falls through, let me know. I may be able to have my shipping guy pick it up. Brian

Crotalus · 06-28-2004, 12:50 AM

Brian, Its suppose to be gone around the 28th or the week of. If not i am forced to do something else. I cannot store any dismantled or non licensed vehicles here anymore. I sold my 62 Chev and this truck stuff needs to be gone. Then i still have a Nova to do something with, i will let you know if nothing happens. Thank you!

70 longbed · 06-29-2004, 03:02 PM

Micha,

Take it that your health went bad again; really sorry to hear that. What is the deal on the Nova. Did you get it back together? I had it pretty far apart. Is it running?

05-18-2004, 11:35 PM	#1
Crotalus Registered User Join Date: Dec 2003 Location: Arizona Posts: 58	67 Parts For Sale 1967 GMC Short Frame and Bed w/tailgate (bed has some damage to lower driver side) has optional metal floor that is straight. Have completly rust free 67 Cab, 1 1967 passanger door, other LH and RH door are from a 1972, it comes with rare factory 1pc drive shaft, a 67-8 Chevy core support a GMC core support, a 67 Chevy grille and trim, rolling on 6 lug rallys, im throwing in 6 5 lug rallys, a complete 73 DB crossmember w/ PS and sway bar, At crossmember, 72 5 lug leaf spring housing, 67 hood, 69-72 hood, extra soft ray door glass, some ac parts (cab is non-ac) theres a inst cluster, hood hinges, couple inner fenders, 67 bucket seat frame, door hinges, window regulators, glove box doors, all sorts of misc parts and pieces, 2 sport bumpers, 2-cowl pieces, $900 for everything I have a set of factory 69-70 bucket seats for a additional I just want it all gone. Sorry i don't have any pictures off hand, i will not consider shipping, unless you arranged by buyer, i will be more than willing to help load it on a truck or trailer. __________________ 1967 GMC SWB Project 468T400 1962 Chevy Belair S/W 396T350 Last edited by Crotalus; 05-20-2004 at 12:33 PM.

05-18-2004, 11:50 PM	#2
swede413 Registered User Join Date: Apr 2001 Location: Las Vegas NV Posts: 183	Im intrested, is the frame leaf or coil? where in AZ are you? __________________ 70 blazer 350 3on tree 98 GMC 3/4 ton 4x4 5 speed manual

05-19-2004, 01:53 AM	#3
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	in interested in the bed pm'ed you __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-19-2004, 02:40 AM	#4
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Hey DR. By chance do you have an original heater delete plate for the firewall you would sell? __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

05-19-2004, 09:03 AM	#5
Crotalus Registered User Join Date: Dec 2003 Location: Arizona Posts: 58	the frame is a 67 gmc leaf. diggy i pmed you back-you were interested in the nice floor with bad sides correct? fine- i need a DR i cant even walk, i have a severe viral infection. I cant even go to work (maybe that parts not so bad) anyhow i have a heater delete setup. i have no idea how much i want, i was going to ebay, to see what it would sell for.. the previous owner drilled 2 holes in it, for the hoses to pass through for AC he had ac but no heat, but thats the most important here in AZ __________________ 1967 GMC SWB Project 468T400 1962 Chevy Belair S/W 396T350

05-19-2004, 09:41 AM	#6
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Please price me the heater delete, Or if you dont really want to sell i understand. But put me on the top of the list before you Ebay it. Thanks. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

05-19-2004, 01:51 PM	#7
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Truck Micah, does it have a good title? I can't believe nobody is snagging this! I'll have to call my trucker and find out how much to ship. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-19-2004, 01:56 PM	#8
Crotalus Registered User Join Date: Dec 2003 Location: Arizona Posts: 58	Fine. I don't have any desire to keep the delete plates. I have the piece for the dash, the firewall plate, it also comes with a radio delete, and lighter delete. Im going to sell it all as a package. I have no idea how much, thats why i was going to try ebay when im mobile again, im not suppose to be driving and doing anything, the doctors have me eating Percocets like they are M&M's to the point where i cannot function or think straight, so i thought id wait to list anything for a little while Unless its stuff to be picked up. I don't like to ship stuff at all, as im honestly very slow . Heck i have been meaning to send my own father a big block bracket for about 2 months. Anyhow, I turned down $125 for the heater setup when i first picked it up. If you still want it make me a reasonable offer. I probably won't say no at this point. My email is arizonaherper@hotmail.com Please try to use email. I dont check the board very often. __________________ 1967 GMC SWB Project 468T400 1962 Chevy Belair S/W 396T350

05-19-2004, 09:44 PM	#9
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	Fleetbed? is this a fleet bed truck? do you know how long the drive shaft is? i don't think one-piece drive shafts are odd on short fleet bed trucks. i think they were standard and two-piece was standard on stepbed trucks(different wheelbase). i might be wrong??

05-20-2004, 12:34 PM	#10
Crotalus Registered User Join Date: Dec 2003 Location: Arizona Posts: 58	Ive had several inquiries on how much for the bucket seat and the console alone. I cannot ship them, i will sell them for $200 with console. Im going to put them on ebay with the Buy It Now option, and for pickup within the Phoenix area. Unless someone emails me first. __________________ 1967 GMC SWB Project 468T400 1962 Chevy Belair S/W 396T350

05-20-2004, 02:32 PM	#11
Crotalus Registered User Join Date: Dec 2003 Location: Arizona Posts: 58	UPDATE The 67 has been sold!!! Thanks 72SUPER4x4 can anyone out there point him in the direction of a reliable reasonably priced transportation company or car hauler????? It needs to go from Arizona to New York. Thank you! __________________ 1967 GMC SWB Project 468T400 1962 Chevy Belair S/W 396T350

05-27-2004, 02:25 AM	#12
Radke Registered User Join Date: Apr 2004 Location: Seward Ne. Posts: 50	About the shipping call 800 436 2991 and talk to a guy we call Blacky between 7am and 5pm central time he is a truck broker and maybe can help tell him Steve told you to call Good Luck.

06-26-2004, 01:47 AM	#13
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Send pics of passenger door and driver door. Mine is a 67. Plus shipping cost Zip 77705. inspector722@aol.com

06-27-2004, 03:52 PM	#14
Crotalus Registered User Join Date: Dec 2003 Location: Arizona Posts: 58	It has been sold, the truck should be leaving around the 28th if not i am forced to get it out of the yard by other means. The city doesn't care for some of my stuff apparently. Sorry i cannot ship any parts. Thank you! __________________ 1967 GMC SWB Project 468T400 1962 Chevy Belair S/W 396T350

06-27-2004, 05:15 PM	#15
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck Micah, if for some reason the deal falls through, let me know. I may be able to have my shipping guy pick it up. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

06-28-2004, 12:50 AM	#16
Crotalus Registered User Join Date: Dec 2003 Location: Arizona Posts: 58	Brian, Its suppose to be gone around the 28th or the week of. If not i am forced to do something else. I cannot store any dismantled or non licensed vehicles here anymore. I sold my 62 Chev and this truck stuff needs to be gone. Then i still have a Nova to do something with, i will let you know if nothing happens. Thank you!

06-29-2004, 03:02 PM	#17
70 longbed Senior Member Join Date: Oct 2002 Location: Sierra Vista, AZ Posts: 490	Micha, Take it that your health went bad again; really sorry to hear that. What is the deal on the Nova. Did you get it back together? I had it pretty far apart. Is it running? __________________ Keith 70 CST longbed in progress. Hoping to get it back on the road soon.

Register or Log In To remove these advertisements.