68 C10 parts for sale soon - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glock35ipsc · 05-19-2004, 08:46 PM

I still have a few parts left off of the 68. If you need anything not listed, let me know, as I am not sure what I will reuse and what I will sell.

3-SPEED TRANNY, LINKAGES, PEDALS, CROSSMEMBER, AND STEERING COLUMN - Everything works great. I was driving this truck until I got hit. Shifted fine, turn signals stayed on and canceled correctly. $200 for all

HOOD - Rust free, has all of the CHEVROLET letters that are in good condition. The hood has some hail dings, and about 75%-85% could be easily removed from the bottom side. The ones along the sides that have another layer of metal under them may be challenging (at least for me). Most of what you see is just dirt. Hood and letters only, no latch or hinges. $50

DOORS - Again, the driver’s door got hit, but I believe a replacement skin would fix this one just perfectly. It still closes as easily now as it did before the accident, so I feel confident that it didn’t get tweaked. There are NO speaker holes in these doors! Door shell only, no glass or other hardware. $10 for the drivers door. PASS DOOR SOLD

TAILGATE - Aftermarket tailgate. Good and rust-free, but has a boo-boo near the handle. No hardware (latch handle, rods, etc.). $20

DISC BRAKE FRONT END out of a 72 C10. Crossmember, upper and lower control arms, and stock spindles. Assembled, and unbolted from the frame. I can put it on a pallet. $50 plus ship.

I would prefer these to be picked up locally, but I am willing to ship via FedEx Freight or Greyhound. Or if someone is doing a parts run and going past me they could pick them up for you.

Email me if you need something that is not listed here, I will see what I can do

glock35ipsc · 05-19-2004, 10:58 PM

ttt, now with some pics!

Ice68 · 05-20-2004, 03:18 AM

Hello,
I'm interested in the tailgate and the bed. I live near Durango, CO.
Thanks,
Leroy

**D.PASSMORE** · 05-20-2004, 03:58 AM

I'll take the fenders if you will box and ship. Florida 32968. Grey hound is a good way to ship these.

glock35ipsc · 05-20-2004, 07:56 AM

OK, so far:

Ice68 has dibs on the bed,

71 shortbox has dibs on the tailgate, followed by sparky69, then Ice68

D.PASSMORE has dibs on the fenders. I will check into the Greyhound thing. I don't think we have a depot around here anymore. If not, I would prefer to ship FedEx Freight. I will check on rates when I get them off and gets weights.

Thanks everyone!!!

**D.PASSMORE** · 05-21-2004, 08:20 AM

Please e-mail me when you find out, my email addy is in my signature. Thanks and good luck on your project.

glock35ipsc · 05-26-2004, 07:49 PM

Ice68 and D. Passmore, you have PM's!

smonty · 05-26-2004, 09:25 PM

How much for the tailgate! HEHEHE!!!.

glock35ipsc · 05-27-2004, 07:41 PM

Ice68, I need your email address to send some pics.

Smonty - Ice68 is thinking about both the bed and tailgate, I'll let you know.

emmett · 05-28-2004, 02:35 AM

Glock35
I would be interested in the tailgate how far do you live from I-80 I am heading to Ogden UT, July 7 if it's still avaliable and your not to far frum I-80 I could pick it up PM me and let me know.

Thanks EMMETT

jose · 05-28-2004, 10:51 AM

Any pictures of the passenger side door ? Do you still have it ? Interested in the drivers side outside mirrow also My zip 97301 .

orangeuavol · 05-28-2004, 11:34 AM

are the 6 lug rallyes 8" or 10"?

Bamm · 05-28-2004, 11:46 AM

pm sent...........

glock35ipsc · 05-28-2004, 07:46 PM

Quote:

Originally Posted by jose

Any pictures of the passenger side door ? Do you still have it ? Interested in the drivers side outside mirrow also My zip 97301 .

Email sent

glock35ipsc · 05-28-2004, 07:47 PM

Quote:

Originally Posted by orangeuavol

are the 6 lug rallyes 8" or 10"?

orangeuavol, PM sent

dmnall · 05-28-2004, 08:24 PM

If the doors are available and the fenders are available, I am interested in both, just need to find out how much shipping would be too 93117.

Charlie

glock35ipsc · 06-15-2004, 08:15 AM

Quote:

Originally Posted by dmnall

If the doors are available and the fenders are available, I am interested in both, just need to find out how much shipping would be too 93117.

Charlie

Sorry for the delay. I only have the pass side left. It cost just over $55 to send the other one to Oregon, so shipping should be about the same.

05-19-2004, 08:46 PM	#1
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	68 C10 parts for sale soon I still have a few parts left off of the 68. If you need anything not listed, let me know, as I am not sure what I will reuse and what I will sell. 3-SPEED TRANNY, LINKAGES, PEDALS, CROSSMEMBER, AND STEERING COLUMN - Everything works great. I was driving this truck until I got hit. Shifted fine, turn signals stayed on and canceled correctly. $200 for all HOOD - Rust free, has all of the CHEVROLET letters that are in good condition. The hood has some hail dings, and about 75%-85% could be easily removed from the bottom side. The ones along the sides that have another layer of metal under them may be challenging (at least for me). Most of what you see is just dirt. Hood and letters only, no latch or hinges. $50 DOORS - Again, the driver’s door got hit, but I believe a replacement skin would fix this one just perfectly. It still closes as easily now as it did before the accident, so I feel confident that it didn’t get tweaked. There are NO speaker holes in these doors! Door shell only, no glass or other hardware. $10 for the drivers door. PASS DOOR SOLD TAILGATE - Aftermarket tailgate. Good and rust-free, but has a boo-boo near the handle. No hardware (latch handle, rods, etc.). $20 DISC BRAKE FRONT END out of a 72 C10. Crossmember, upper and lower control arms, and stock spindles. Assembled, and unbolted from the frame. I can put it on a pallet. $50 plus ship. I would prefer these to be picked up locally, but I am willing to ship via FedEx Freight or Greyhound. Or if someone is doing a parts run and going past me they could pick them up for you. Email me if you need something that is not listed here, I will see what I can do __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 06-15-2004 at 08:14 AM. Reason: Updated post

05-19-2004, 10:58 PM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	ttt, now with some pics! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

05-20-2004, 03:18 AM	#3
Ice68 Registered User Join Date: Dec 2003 Location: NW New Mexico Posts: 236	Hello, I'm interested in the tailgate and the bed. I live near Durango, CO. Thanks, Leroy __________________ '68 Chevy Truck C10 LWB 292 engine 3spd Tranny Everything Stock except for shaved bodywork. '72 Chevy Truck Custom Deluxe 2WD LWB 350/350 HEI Tilt PS AC Dual Exhaust

05-20-2004, 03:58 AM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Fenders I'll take the fenders if you will box and ship. Florida 32968. Grey hound is a good way to ship these. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

05-20-2004, 07:56 AM	#5
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	OK, so far: Ice68 has dibs on the bed, 71 shortbox has dibs on the tailgate, followed by sparky69, then Ice68 D.PASSMORE has dibs on the fenders. I will check into the Greyhound thing. I don't think we have a depot around here anymore. If not, I would prefer to ship FedEx Freight. I will check on rates when I get them off and gets weights. Thanks everyone!!! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

05-21-2004, 08:20 AM	#6
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Fenders Please e-mail me when you find out, my email addy is in my signature. Thanks and good luck on your project. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

05-26-2004, 07:49 PM	#7
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Ice68 and D. Passmore, you have PM's! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

05-26-2004, 09:25 PM	#8
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply How much for the tailgate! HEHEHE!!!. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-27-2004, 07:41 PM	#9
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Ice68, I need your email address to send some pics. Smonty - Ice68 is thinking about both the bed and tailgate, I'll let you know. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

05-28-2004, 02:35 AM	#10
emmett Registered User Join Date: Nov 2003 Location: Kaukauna WI Posts: 193	Tailgate Glock35 I would be interested in the tailgate how far do you live from I-80 I am heading to Ogden UT, July 7 if it's still avaliable and your not to far frum I-80 I could pick it up PM me and let me know. Thanks EMMETT __________________ Kaukauna WI Airplaines don't land here they are sucked down

05-28-2004, 10:51 AM	#11
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Any pictures of the passenger side door ? Do you still have it ? Interested in the drivers side outside mirrow also My zip 97301 . __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

05-28-2004, 11:34 AM	#12
orangeuavol GO VOLS! Join Date: May 2001 Location: Knoxville, TN Posts: 724	are the 6 lug rallyes 8" or 10"? __________________ http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission.

05-28-2004, 11:46 AM	#13
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	pm sent........... __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

05-28-2004, 08:24 PM	#16
dmnall Registered User Join Date: Apr 2001 Location: Goleta, CA Posts: 505	If the doors are available and the fenders are available, I am interested in both, just need to find out how much shipping would be too 93117. Charlie __________________ 1968 C10 Truck LWB Fleetside 1968 C10 Truck SWB Stepside 1994 K2500 Ext Cab Fleetside 2008 Honda Civic Si lease



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.