05-20-2004, 10:59 AM | #1 |
Silverado Stew
Join Date: Jan 2004
Location: Ewing, MO
Posts: 184
|
What's it worth?
I have an '84 scottsdale for sale over on the parts board. I'd like for you all to check it out and if my price is too high, tell me what you think it should be because I'm going to try to sell it in the local traders.
Thanks
__________________
- 1997 3/4 Ton Ext. Cab LB 4x4 6.5L Diesel - 1979 3/4 Ton Longbed 4x4 "Farm Truck" - 1984 1/2 Ton w/ '99 Vortec 350/700R4 2x4 FOR SALE |
05-20-2004, 04:30 PM | #2 |
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
don't take this the wrong way, i'm only saying it because you asked. but with a truck with no motor and rust, i think you will have a hard time getting more than mabey 1500 for it, if that. even if it would only cost a few hundred to trough a motor in it, its going to make it hard to sell for very much, especialy with rust
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
05-20-2004, 04:31 PM | #3 |
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
just to give you an idea, i bought my truck with a near PERFECT body. no rust anywhere. good paint. clean interior. good running 350/th350. and i paid 3k for it
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
05-20-2004, 06:10 PM | #4 |
www.73-87chevytrucks.com
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
I have an '82 with no motor for sale for $800 on the parts board if that gives you an idea. If you want to make more money off of it you will need ot part it out.
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com |
05-20-2004, 10:18 PM | #5 |
Registered User
Join Date: Oct 2003
Location: Dallas, Tx.
Posts: 308
|
I bought my truck for $800 with a straight undented rust free body, 305/350, and clean interior. But it had almost 200k miles and the paint on the bedsides is scratched up.
|
05-21-2004, 08:30 AM | #6 |
Silverado Stew
Join Date: Jan 2004
Location: Ewing, MO
Posts: 184
|
Thanks for the replies fellers. I wouldn't have asked if I didn't want you all to tell me what you honestly thought.
I knew I was high on my price, but I try to do that so I have room to come down and make both sides feel like they got a good deal. In defense of my price range, the rust that is on this truck is very minimal, especially for my neck of the woods. Thanks again. |
Bookmarks |
|
|