Lower Balljoints on 98 Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

poorboyz · 05-22-2004, 03:32 PM

ok, I took on a weekend warrior project.

I have the spindle off my truck but I dont have clearance for the new balljoints. I used my recriprocating saw on the old one.

What is the trick in getting the new balljoint on?

I'm sure you are laughing at how I did this.

thanks

KutThroatKustoms · 05-23-2004, 12:37 AM

They might be press in type.

bigbluthng · 05-24-2004, 01:08 AM

they are pressed in at the factory. autozone loans a ball joint press to get them on/off.

05-22-2004, 03:32 PM	#1
poorboyz Registered User Join Date: May 2004 Location: Cleveland, Ohio Posts: 1	Lower Balljoints on 98 Blazer ok, I took on a weekend warrior project. I have the spindle off my truck but I dont have clearance for the new balljoints. I used my recriprocating saw on the old one. What is the trick in getting the new balljoint on? I'm sure you are laughing at how I did this. thanks

05-23-2004, 12:37 AM	#2
KutThroatKustoms drag body or die Join Date: May 2004 Location: Redneck country Posts: 79	They might be press in type. __________________ -Bobby-

05-24-2004, 01:08 AM	#3
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	they are pressed in at the factory. autozone loans a ball joint press to get them on/off. __________________



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.