dana 44 with 4.56 gears for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 05-22-2004, 07:48 PM

thought i'd see if there was any interest here before i part it out and put it on ebay. it's out of a mid 70s 3/4 ton, disc brakes, open differential, complete except for the lockouts. it's a big hub version with big diameter axle shafts.$300.00 complete, local pick up only will not ship. if you don't like my price, i'm open to reasonable offers.

2wdBlazer · 05-22-2004, 11:47 PM

Man. I wish I had a way to get that.

sakohntr · 05-23-2004, 01:57 PM

Jerry, are those aftermarket "large" axle shafts ?

**jerry moss** · 05-23-2004, 06:20 PM

Bruce,
they're the stock 73 on up shafts, the inner halves are quite a bit larger than the 71-72 versions.

SoCal71K20 · 05-24-2004, 12:27 PM

Jerry,would the width be close to my 71K20's D44. I'm sure mounting would not be a problem with leaf springs,just wondering about rotor to rotor distance. Might even be the same. I was planning on lifting mine 4 inches. A
beefier D44 at the same time would be even better. I believe your D44 also has the stronger U-joint too.

**jerry moss** · 05-24-2004, 07:50 PM

it's a direct bolt in for your truck, i run later axles under my own trucks. the later version is also much easier to buy replacement parts for.

SoCal71K20 · 05-25-2004, 11:52 AM

Cool, yeah Jerry me very interested.I'd be comming up from San Diego.When you get a chance my e-mail is fgonzo@cox.net We can talk more and see if there is room for price haggling,etc.Thanks.

**jerry moss** · 05-25-2004, 07:54 PM

i'm in the other brentwood--- northern calif, near san francisco. here's my phone number 925-634-2512 if you have questions.
jerry moss

05-22-2004, 07:48 PM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,831	dana 44 with 4.56 gears for sale thought i'd see if there was any interest here before i part it out and put it on ebay. it's out of a mid 70s 3/4 ton, disc brakes, open differential, complete except for the lockouts. it's a big hub version with big diameter axle shafts.$300.00 complete, local pick up only will not ship. if you don't like my price, i'm open to reasonable offers. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 05-22-2004 at 11:28 PM.

05-22-2004, 11:47 PM	#2
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,213	Man. I wish I had a way to get that. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.

05-23-2004, 01:57 PM	#3
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	shafts Jerry, are those aftermarket "large" axle shafts ? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

05-23-2004, 06:20 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,831	Bruce, they're the stock 73 on up shafts, the inner halves are quite a bit larger than the 71-72 versions. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

05-24-2004, 07:50 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,831	it's a direct bolt in for your truck, i run later axles under my own trucks. the later version is also much easier to buy replacement parts for. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

05-24-2004, 12:27 PM	#5
SoCal71K20 Registered User Join Date: Jan 2002 Location: Lemon Grove, California Posts: 152	Jerry,would the width be close to my 71K20's D44. I'm sure mounting would not be a problem with leaf springs,just wondering about rotor to rotor distance. Might even be the same. I was planning on lifting mine 4 inches. A beefier D44 at the same time would be even better. I believe your D44 also has the stronger U-joint too.

05-25-2004, 11:52 AM	#7
SoCal71K20 Registered User Join Date: Jan 2002 Location: Lemon Grove, California Posts: 152	Cool, yeah Jerry me very interested.I'd be comming up from San Diego.When you get a chance my e-mail is fgonzo@cox.net We can talk more and see if there is room for price haggling,etc.Thanks.

05-25-2004, 07:54 PM	#8
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,831	i'm in the other brentwood--- northern calif, near san francisco. here's my phone number 925-634-2512 if you have questions. jerry moss __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.