For Sale in DFW Area - New Parts List 5/30/04 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 05-30-2004, 07:49 PM

Misc Parts for Sale in DFW area

--------------------------------------------------------------------------------

I have the following parts for sale in the Dallas, TX area:

Shipping is additional except where noted:

1. Very Nice straight Tailgate w/no rustnot bowed and just some small dings on the top edge. Has been sandblasted. $175.00 (SOLD)

2. Nice SWB Passenger fleetside Bedside. Sandblasted w/no bondo and only minor dings in the rear section - $225.00 (SOLD)

3. SWB Driver's fleetside Bedside - Straight but needs some work and has bondo - $75.00 (SOLD)

4. SWB Steel Bedfloor - only minor dings - $150.00 - has no rust-through and is very nice! (SOLD)

5. 1 Black NOS 68-71 Armrest (no box) - $10.00

6. 1 Repro dome lens new in package - $5.50 (Delivered)

7. Pair of NOS Amber standard Fender Parking Lenses - $10.00

8. 1 NOS 69-70 In-Grill Parking Light Lens - $5.00

9. After market under dash A/C unit has heat and air. Looks like a vintage air unit. Was working when pulled and has been sealed with tape since. This in the underdash unit only. $75.00

10. Pair of doors that are solid. Have speaker holes and minor dents - $50.00

11. Used but good A/C compressor W/Clutch (long type for our trucks) - $30.00

12. BBC Alternator Brackets - $10.00

13. BBC Power Steering Pump W/Brackets (Does not have reservoir) - $25.00

14. Pair of used 69-70 parking light assys - $10.00

15. Pair of used 67/68 parking light assys - $10.00

16. Set of Seville Rear disc Brake brackets w/dust shields (can be modified for use on 12 Bolt axles - $20.00

17. Set of 5 Lug 71 model axles - $40.00

18. Set of Rocket wide turbine aluminum wheels 5 lug (uni-lug) pattern 8.5 X 15 - $100.00

19. SWB Steel Bed floors (3) your choice - $75.00 (Possibly Sold)

20. 69-72 Driver's side fender - $50.00 straight.

21. 69-72 Passenger side fender - $50.00 (Some bondo and rust on bottom front) otherwise fender is straight.

22. 69/70 grille - $50.00 Fairly nice but driver quality.

23. SBC fan shroud - $40.00 Nice. Like new.

24. Auto shift column complete with fiber optics - $50.00 Nice (SOLD)

25. Cab w/doors - $300.00 - Cab and doors have been completely sand blasted revealing very little rust. The doors have some bondo revealed from the blasting but are smooth, not dented, and have no speaker holes and very little rust. These will not need much work. The cab needs rockers and some work on the passenger side cab corner. Floors are very solid. If you are seriously interested I will take some pictures of any area of the cab or doors that you wish to see. I can store the cab until it can be picked up. Also, have the title and vin plate for this cab which can be included for an additional $50.00.

26. Auto shift linkage (Complete) - $40.00

27. One Piece SWB drive shaft w/T350/3 Speed yoke - $50.00

29. Idiot lite dash - $15.00

30. Deluxe non-tach Dash - $20.00

31. Standard in-cab Gas tank w/drain plug - $40.00 No rust.

32. Set of black armrests - $18.00 - GM used no cracks or tears.

33. Set of black sun visors - $20.00 - GM used not tears.

35. Inside rear view mirror and mount - $12.00

This is just a few things that I had lying around. Will post more parts on here this week before they go to Ebay.

Thanks for looking.

Ernie

Bryan68custom · 05-30-2004, 08:00 PM

I am intersted in the doors and arm rest do you have pic's

ratrod67 · 05-30-2004, 08:19 PM

Got pics of the Rocket wheels?

smonty · 05-30-2004, 09:53 PM

I have pictures of the doors and wheels. Please send me your email addresses and I will send them to you.

Thanks,

Ernie

Mrs72shadetree · 05-30-2004, 10:22 PM

the bbc alt brackets and the bbc power steering pump are they for a short or long pump send pics to handd72@adelphia.net

ratrod67 · 05-30-2004, 10:27 PM

Pics of the wheels to kobuzz@sbcglobal.net Thanks!

nu2-72 · 05-31-2004, 08:52 AM

Is the tailgate fleetside Chevy?

smonty · 05-31-2004, 09:15 AM

Hello Kevin,

The Tailgate has ''CHEVROLET" on it. I will send you a picture of it if you want. The gate is sandblasted and shows no rust or bondo. The top of the gate has some minor dings which are not a tough fix.

Ernie

Burnsman · 05-31-2004, 09:28 AM

If the brackets and power steering stuff are for short water pump, I'll take them. My zip is 16335. Thanks. Brian

smonty · 05-31-2004, 09:49 AM

Hello Brian,

I am not a BBC person so would like to send you a picture of the setup and brackets. I believe they are for a short pump as they are different from the ones on my 71 which has a long pump. Please send me your email address and I will send you a picture so you will know if this are what you need.

Ernie

Mrs72shadetree · 05-31-2004, 10:58 AM

the bbc alt brackets/and power steering stuff send me your address so i know where to send money order to.thanks handd72@adelphia.net

smonty · 05-31-2004, 11:16 AM

Howdy Mrs72shadetree,

You have first dubs on the power steering and alternator stuff. HotrodHenryJ is next and then Burnsman. I want to send ya'll pictures before you send me any $$$. Will send them before noon today.

Thanks,

Ernie

smonty · 05-31-2004, 12:53 PM

Sent pictures to everyone who requested them. If you requested one and did not receive it please let me know and I will send you one.

Ernie

ALSO, I JUST UPDATED THIS LIST. ADDED SOME MORE PARTS.

THANKS FOR LOOKING!

azngosh8r · 06-01-2004, 01:45 AM

Hello-
I am interested in the 69-72 ds fender,the swb pass bedside and the best swb bed floor u have..also the auto column....Can us send me pictures and maybe a package deal shipped to az 85310?
Thanks! Russ
russellisaz@hotmail.com

Burnsman · 06-01-2004, 07:55 AM

Ernie, do you still have them? If so, you can send pics to bburns@vikingtg.com. Thanks!

nu2-72 · 06-01-2004, 09:09 AM

Ernie, sounds good. I am still out of state so a pic would do me no good right now. I trust you anyway. I can send a Mo. on Friday when I get back to Mo. if you like. If that is too late, not a problem. Can you bring it with you?

smonty · 06-01-2004, 10:38 AM

Hey Kevin,

Sent you an email. I will mark the tailgate sold. As you saw in the picture the gate is blasted and shows only those two small areas. The dings on the top of it are minor and should not be a problem for you to fix.

Thanks,

Ernie

Ernie

Bryan68custom · 06-01-2004, 11:05 AM

I got the pic of the doors do you have any pic's of the inside of them I would like to see the speaker holes on the bottom of them if you could please.

Southern Rebel · 06-01-2004, 05:02 PM

could you send me picture of the grill if you still have it.

smonty · 06-02-2004, 12:48 AM

I still have the grille. If you would send me your email address I will email you a picture.

Ernie

Southern Rebel · 06-02-2004, 07:24 AM

I sent you a pm with my email. Thanks,

TEXAS 68 · 06-02-2004, 04:56 PM

Ernie, will those 71 axles fit in a 68 rear end??

**'70_402** · 06-02-2004, 05:48 PM

Ernie, sent you a pm

smonty · 06-03-2004, 12:47 AM

The axles will not work in your 68 housing. I have a 71 housing you can have with the axles but it would be easier to find a complete 5 lug axle. If I see one around here cheap I will let you know.

Ernie

mhicks · 06-03-2004, 01:18 PM

Could you send me a picture of the under dash AC.

Mike

05-30-2004, 07:49 PM	#1
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	For Sale in DFW Area - New Parts List 5/31/04 Misc Parts for Sale in DFW area -------------------------------------------------------------------------------- I have the following parts for sale in the Dallas, TX area: Shipping is additional except where noted: 1. Very Nice straight Tailgate w/no rustnot bowed and just some small dings on the top edge. Has been sandblasted. $175.00 (SOLD) 2. Nice SWB Passenger fleetside Bedside. Sandblasted w/no bondo and only minor dings in the rear section - $225.00 (SOLD) 3. SWB Driver's fleetside Bedside - Straight but needs some work and has bondo - $75.00 (SOLD) 4. SWB Steel Bedfloor - only minor dings - $150.00 - has no rust-through and is very nice! (SOLD) 5. 1 Black NOS 68-71 Armrest (no box) - $10.00 6. 1 Repro dome lens new in package - $5.50 (Delivered) 7. Pair of NOS Amber standard Fender Parking Lenses - $10.00 8. 1 NOS 69-70 In-Grill Parking Light Lens - $5.00 9. After market under dash A/C unit has heat and air. Looks like a vintage air unit. Was working when pulled and has been sealed with tape since. This in the underdash unit only. $75.00 10. Pair of doors that are solid. Have speaker holes and minor dents - $50.00 11. Used but good A/C compressor W/Clutch (long type for our trucks) - $30.00 12. BBC Alternator Brackets - $10.00 13. BBC Power Steering Pump W/Brackets (Does not have reservoir) - $25.00 14. Pair of used 69-70 parking light assys - $10.00 15. Pair of used 67/68 parking light assys - $10.00 16. Set of Seville Rear disc Brake brackets w/dust shields (can be modified for use on 12 Bolt axles - $20.00 17. Set of 5 Lug 71 model axles - $40.00 18. Set of Rocket wide turbine aluminum wheels 5 lug (uni-lug) pattern 8.5 X 15 - $100.00 19. SWB Steel Bed floors (3) your choice - $75.00 (Possibly Sold) 20. 69-72 Driver's side fender - $50.00 straight. 21. 69-72 Passenger side fender - $50.00 (Some bondo and rust on bottom front) otherwise fender is straight. 22. 69/70 grille - $50.00 Fairly nice but driver quality. 23. SBC fan shroud - $40.00 Nice. Like new. 24. Auto shift column complete with fiber optics - $50.00 Nice (SOLD) 25. Cab w/doors - $300.00 - Cab and doors have been completely sand blasted revealing very little rust. The doors have some bondo revealed from the blasting but are smooth, not dented, and have no speaker holes and very little rust. These will not need much work. The cab needs rockers and some work on the passenger side cab corner. Floors are very solid. If you are seriously interested I will take some pictures of any area of the cab or doors that you wish to see. I can store the cab until it can be picked up. Also, have the title and vin plate for this cab which can be included for an additional $50.00. 26. Auto shift linkage (Complete) - $40.00 27. One Piece SWB drive shaft w/T350/3 Speed yoke - $50.00 29. Idiot lite dash - $15.00 30. Deluxe non-tach Dash - $20.00 31. Standard in-cab Gas tank w/drain plug - $40.00 No rust. 32. Set of black armrests - $18.00 - GM used no cracks or tears. 33. Set of black sun visors - $20.00 - GM used not tears. 35. Inside rear view mirror and mount - $12.00 This is just a few things that I had lying around. Will post more parts on here this week before they go to Ebay. Thanks for looking. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project Last edited by smonty; 06-02-2004 at 10:43 AM. Reason: Added Parts

05-30-2004, 08:00 PM	#2
Bryan68custom Registered User Join Date: Aug 2003 Location: Denison, Tx. Posts: 189	I am intersted in the doors and arm rest do you have pic's __________________ 2004 Extended cab LS silverado 2001 Buick Lesabre 1968 Chevy Custom 10 LWB Anniversery model 2008 crew cab lt (rolling on dubs) "The nice part about living in a small town is when you don't know what you're doing, someone else always does"

05-30-2004, 09:53 PM	#4
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply I have pictures of the doors and wheels. Please send me your email addresses and I will send them to you. Thanks, Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-30-2004, 10:22 PM	#5
Mrs72shadetree YES ITS MINE Join Date: Nov 2003 Location: Virginia Posts: 241	the bbc alt brackets and the bbc power steering pump are they for a short or long pump send pics to handd72@adelphia.net __________________ 97 Lumina 69 short step i got it and no he cant drive it!!!!!!!!!!!!! GO DALE JR.!!!! I love chihuahua's Bassett, Va

05-31-2004, 08:52 AM	#7
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Is the tailgate fleetside Chevy? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

05-30-2004, 08:19 PM	#3
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Got pics of the Rocket wheels?

05-30-2004, 10:27 PM	#6
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Pics of the wheels to kobuzz@sbcglobal.net Thanks!

05-31-2004, 09:15 AM	#8
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to nu2-72 Hello Kevin, The Tailgate has ''CHEVROLET" on it. I will send you a picture of it if you want. The gate is sandblasted and shows no rust or bondo. The top of the gate has some minor dings which are not a tough fix. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-31-2004, 09:28 AM	#9
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Bbc Brackets If the brackets and power steering stuff are for short water pump, I'll take them. My zip is 16335. Thanks. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-31-2004, 09:49 AM	#10
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to Burnsman Hello Brian, I am not a BBC person so would like to send you a picture of the setup and brackets. I believe they are for a short pump as they are different from the ones on my 71 which has a long pump. Please send me your email address and I will send you a picture so you will know if this are what you need. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-31-2004, 10:58 AM	#11
Mrs72shadetree YES ITS MINE Join Date: Nov 2003 Location: Virginia Posts: 241	the bbc alt brackets/and power steering stuff send me your address so i know where to send money order to.thanks handd72@adelphia.net __________________ 97 Lumina 69 short step i got it and no he cant drive it!!!!!!!!!!!!! GO DALE JR.!!!! I love chihuahua's Bassett, Va

05-31-2004, 11:16 AM	#12
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to Mrs72shadetree Howdy Mrs72shadetree, You have first dubs on the power steering and alternator stuff. HotrodHenryJ is next and then Burnsman. I want to send ya'll pictures before you send me any $$$. Will send them before noon today. Thanks, Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-31-2004, 12:53 PM	#13
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Pictures of BBC Stuff Sent pictures to everyone who requested them. If you requested one and did not receive it please let me know and I will send you one. Ernie ALSO, I JUST UPDATED THIS LIST. ADDED SOME MORE PARTS. THANKS FOR LOOKING! __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-01-2004, 01:45 AM	#14
azngosh8r Registered User Join Date: Sep 2003 Location: Phoenix Posts: 308	Hello- I am interested in the 69-72 ds fender,the swb pass bedside and the best swb bed floor u have..also the auto column....Can us send me pictures and maybe a package deal shipped to az 85310? Thanks! Russ russellisaz@hotmail.com __________________ Russ Ellis 'Cruizin' the Valley' - Custom Classics *"The Guyz Garage"*

06-01-2004, 07:55 AM	#15
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	brackets and ps stuff Ernie, do you still have them? If so, you can send pics to bburns@vikingtg.com. Thanks! __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

06-01-2004, 09:09 AM	#16
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Ernie, sounds good. I am still out of state so a pic would do me no good right now. I trust you anyway. I can send a Mo. on Friday when I get back to Mo. if you like. If that is too late, not a problem. Can you bring it with you? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

06-01-2004, 10:38 AM	#17
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to nu2-72 Hey Kevin, Sent you an email. I will mark the tailgate sold. As you saw in the picture the gate is blasted and shows only those two small areas. The dings on the top of it are minor and should not be a problem for you to fix. Thanks, Ernie Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-01-2004, 11:05 AM	#18
Bryan68custom Registered User Join Date: Aug 2003 Location: Denison, Tx. Posts: 189	I got the pic of the doors do you have any pic's of the inside of them I would like to see the speaker holes on the bottom of them if you could please. __________________ 2004 Extended cab LS silverado 2001 Buick Lesabre 1968 Chevy Custom 10 LWB Anniversery model 2008 crew cab lt (rolling on dubs) "The nice part about living in a small town is when you don't know what you're doing, someone else always does"

06-01-2004, 05:02 PM	#19
Southern Rebel 70' blazer Join Date: Apr 2004 Location: Durham, NC Posts: 71	pics of grill could you send me picture of the grill if you still have it.

06-02-2004, 12:48 AM	#20
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to Southern Rebel I still have the grille. If you would send me your email address I will email you a picture. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-02-2004, 07:24 AM	#21
Southern Rebel 70' blazer Join Date: Apr 2004 Location: Durham, NC Posts: 71	I sent you a pm with my email. Thanks,

06-02-2004, 04:56 PM	#22
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	Ernie, will those 71 axles fit in a 68 rear end?? __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

06-02-2004, 05:48 PM	#23
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	Ernie, sent you a pm __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

06-03-2004, 12:47 AM	#24
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to Texas 68 The axles will not work in your 68 housing. I have a 71 housing you can have with the axles but it would be easier to find a complete 5 lug axle. If I see one around here cheap I will let you know. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-03-2004, 01:18 PM	#25
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Could you send me a picture of the under dash AC. Mike

Register or Log In To remove these advertisements.