W2t My Truck For A Sb 350 Or 400 Runing Condition

[LUV2XCLR8]

Looking For A 350 Or 400 Small Block Chevy Motor To Put In My
Blazer That Is In Running Condition, I Would Prefer Something
complete and not missing all kinds of parts, also would prefer
Stock And Not Built To The Hill, I Need It To Get Project In A
Movable Status, Buying A New Motor For It In The Future, I've
Got The Lil Swb Stepside On My Homepage I'm Selling, I Have In
Excess Of $1500 In The Truck, Asking $500 Firm, Any Trades ???

( Please do not e-mail me about 283 or 305 motors, I'd prefer 350
or a 400 so I can re-sell it when done making adjustments, etc... )

[LUV2XCLR8]

Come On Tn. Members, This Is A Deal, Whole Truck For Stock Motor.

[muddyole 69]

I have 3 small blocks to choose from 2 4 bolt 350's one 2 bolt 350 I have had them out of the weather for 3 yrs ran when pulled all ran ok not pumped up or anything the 2 bolt has a new timing set when it really needed a cam ok if you were gonna cam it up anyway I have a nearly new cam I would install if you wanted this one the other two were in trucks I drove home and parted so they are running condition but I am sure would at a very minimum need valve seals let me know I work every other week in Murfreesboro and would haul one down and pull the truck back if this is a go pm me and we can work out the details Mike

[LUV2XCLR8]

Are These Complete Assembled Motors ?

Are They Complete Oil Pan To Carb. ?

Are They Missing Anything At All ?

Can U Provide Any Pic's Of Them ?

Can You Provide Any Casting #'s ?

I Would Prefer A 4-bolt Main, Since I Will Be Selling It
After I Get The Blazer Road Worthy, I Just Need It To
Set Up Everything And Drive To And From Body Shops.
Stock Is Ok, Actually What I Would Prefer, I Need As
Much Stuff With It As Possible, I Have Nothing But A
Velocity Stack Air Cleaner & A Set Of M/t V. Covers
Left Over From The 67 Swb Truck I Sold Last Weekend.

Biggest Issue I See Is Getting Truck To Murfreesboro,
And Then Once I Got It There, Getting The Motor Back.

[1971c10]

i have a 350 rocket motor out of a 71 oldsmobile car its complete pan to carb.headers and everything....the carb is a holley 600.. im not sure what its worth but id probably sell it for the right price, Pm Me

[LUV2XCLR8]

1971c10, Thanks, But I'm Looking For Trades Only, Chevy 350 Or 400
Valued Around $500 - $1000 For Even Trade On My 70 Swb C-10 P/u.

[1971c10]

No problem

[1972C10]

Ive got an 88 350 Id trade Long block assembly no brackets or intake. But i do have a cast iron 4 bbl that could go with it.

[LUV2XCLR8]

Sounds Close, I'm Looking For Someone Who Bought A 67-72
Truck To Part Out, Then Drove It Home, And Doesn't Need The
Engine Anymore. Needs To Be Complete From Carb. To Oil Pan.
I Prefer It To Be In Running Condition And Not Have Been Out
Side Unpretected Laying On The Ground. I Think This Is A Fair
Request Since I'm Trading A Complete Running Truck For It. I
CAN TAKE A NEWER MODEL ENGINE IF IT IS COMPLETE. IT IS
GOT TO BE A 350 OR 400 SMALL BLOCK, NO 283'S OR 305'S.

[stllookn]

Wish you were closer! I have a 4-bolt 350 in a 1972 GMC van that is running with all the power options on it. I would love to add another stepside to the fleet...GEOGRAPHICALLY UNDESIREABLE THOUGH! Keep trying...I am sure somebody close has a runner for you!

[1971c10]

has the truck your trading been dropped?

[muddyole 69]

I will get you the info on the 4 bolts tomorrow pics would be no problem they were running motors when pulled talk at ya later mike

[LUV2XCLR8]

71c10, Yes, See Pic's Link Under My Signiture For More Info.

[LUV2XCLR8]

Bump, Bump, Bump