How does the little black deal on the door come off?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 06-05-2004, 10:02 PM

on the door by the window, above door handle???

A few 72's · 06-06-2004, 12:05 AM

To dark out side to go look at mine, but from the assembly manual in the 69 picture the little black deal is made on to the window liner that goes in the rear window guide. Looks to all be made as one piece and has "cement .032 oz"

A few 72's · 06-06-2004, 11:15 PM

Looked at mine today on the 72 and it looks to be made about the one in the manual, but has one phillips screw on the top out side part. Would think start at the bottom of the liner and go up, after removing the screw if present. LMC catalog shows it as one peice also, if you have one of their catalogs.

LUV2XCLR8 · 06-07-2004, 08:17 PM

"a Few 72"s" Is Correct As Usual, The Screw Is Pretty Small If It Is
Still Present, I Had One With & One Without? Go Figure? Rednecks?

teeitup · 06-07-2004, 10:28 PM

Thanks guys I'll look at it tomorrow night.

BLAZERFAN · 06-13-2004, 03:39 AM

Remove the little phillips screw from the top and pull straight up. This will remove the whole part which is the piece on top that holds it in place and the rear window channel that is connected to it. Also made of rubber it's all one piece.

06-05-2004, 10:02 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	How does the little black deal on the door come off?? on the door by the window, above door handle??? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-06-2004, 12:05 AM	#2
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	To dark out side to go look at mine, but from the assembly manual in the 69 picture the little black deal is made on to the window liner that goes in the rear window guide. Looks to all be made as one piece and has "cement .032 oz" __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

06-06-2004, 11:15 PM	#3
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Looked at mine today on the 72 and it looks to be made about the one in the manual, but has one phillips screw on the top out side part. Would think start at the bottom of the liner and go up, after removing the screw if present. LMC catalog shows it as one peice also, if you have one of their catalogs. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

06-07-2004, 08:17 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	"a Few 72"s" Is Correct As Usual, The Screw Is Pretty Small If It Is Still Present, I Had One With & One Without? Go Figure? Rednecks? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-07-2004, 10:28 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Thanks guys I'll look at it tomorrow night. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-13-2004, 03:39 AM	#6
BLAZERFAN Registered User Join Date: May 2004 Posts: 9	Remove the little phillips screw from the top and pull straight up. This will remove the whole part which is the piece on top that holds it in place and the rear window channel that is connected to it. Also made of rubber it's all one piece.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.