Poly BLAZER tank FINNALY startin. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

guitarornothin · 06-11-2004, 05:12 PM

im puttin a poly tank in my truck FINNALY.
i had to try and hunt down the hose. and after a day i got 1-1/2 Feet of FUEL FILL HOSE.
this stuffs hard to find.NOT in my town. LOL

although its not in YET im still on my way. IM GETTIN some progress down. i already made a filler neck that i used exhaust reducers to go from 2" TO 1-1/2 and TO 1-1/4 (same as filler neck ON tank). IM gonna use a filler that i cut off of a nova tank its 2 inch. and well........LOOK AT THE PICS

ill keep you posted

guitarornothin · 06-11-2004, 05:19 PM

heres the pics of the reducers im going to use

I mig welded it and then i buffed it all down.
then i JBwelded it JUST to make sure theres NOT going to be any pinhole leaks. "BETTER SAFE THAN SORRY"
after it all dries im going to clean it up and then por15 it. so it goes down FAST!!!

piecesparts · 06-11-2004, 06:35 PM

So; where are you going to mount the filler at? In the bed, in the fender, in the wheel well, or behind the taillight? I am curious, because that is something that I have to do sometime, on my project.

guitarornothin · 06-11-2004, 06:55 PM

Quote:

Originally Posted by piecesparts

So; where are you going to mount the filler at? In the bed, in the fender, in the wheel well, or behind the taillight? I am curious, because that is something that I have to do sometime, on my project.

IM going to mount it in the bed. I was thinking about behind the taillight.
BUT it will be A longer way for the fuel to travel. PLUS youd have to enlarge the housing.

In the bed just seems easier to me.
Dont get me wrong id love to have it behind the taillight. for that TRICK custom look
,Ryan

sweet n rare67 · 06-11-2004, 10:50 PM

keep us posted...with lots of pics. I would really like to see how it works and fits.
Good Luck

guitarornothin · 06-12-2004, 07:36 PM

I por15'd it today. Its going to run in the Tank FAST...................(I HOPE)

sweet n rare67, it FITS great,....so far

guitarornothin · 06-12-2004, 07:39 PM

opps i got 2 of those,........opps

06-11-2004, 05:12 PM	#1
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	Poly BLAZER tank FINNALY startin. im puttin a poly tank in my truck FINNALY. i had to try and hunt down the hose. and after a day i got 1-1/2 Feet of FUEL FILL HOSE. this stuffs hard to find.NOT in my town. LOL although its not in YET im still on my way. IM GETTIN some progress down. i already made a filler neck that i used exhaust reducers to go from 2" TO 1-1/2 and TO 1-1/4 (same as filler neck ON tank). IM gonna use a filler that i cut off of a nova tank its 2 inch. and well........LOOK AT THE PICS ill keep you posted Attached Images __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

06-11-2004, 05:19 PM	#2
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	heres the pics of the reducers im going to use I mig welded it and then i buffed it all down. then i JBwelded it JUST to make sure theres NOT going to be any pinhole leaks. "BETTER SAFE THAN SORRY" after it all dries im going to clean it up and then por15 it. so it goes down FAST!!! Attached Images __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/. Last edited by guitarornothin; 06-11-2004 at 05:24 PM.

06-11-2004, 10:50 PM	#5
sweet n rare67 Young truck fanatic Join Date: Jun 2003 Location: The wonderful Mat-Su Valley....Palmer, Ak Posts: 253	keep us posted...with lots of pics. I would really like to see how it works and fits. Good Luck __________________ '67 Chevy Longstep 2wd 350 w/4spd manual Muncie M21. My first project. Proud to be Valley Trash

06-12-2004, 07:36 PM	#6
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	POR15'd it today I por15'd it today. Its going to run in the Tank FAST...................(I HOPE) sweet n rare67, it FITS great,....so far Attached Images __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

06-12-2004, 07:39 PM	#7
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	opps i got 2 of those,........opps __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

06-11-2004, 06:35 PM	#3
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	So; where are you going to mount the filler at? In the bed, in the fender, in the wheel well, or behind the taillight? I am curious, because that is something that I have to do sometime, on my project.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.