What do fenders go for also SWB??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyDude · 06-12-2004, 12:16 PM

I have a set L/R fenders from my 71' swb that I did not use. They are original. straight, and in primer. I want to sell them but want to ask a fair price for both me and the buyer. Also I have a complete Short Wide Bed, missing the tailgate though that I want to sell. It is also straight and in primer, does have some surface rust and needs to be taken apart to finish correctly. Any input would be great.

Thanks guys!

HOTFUN · 06-12-2004, 01:14 PM

Alex

I would be interested in your box. Is it a metal floor and what shape is the inside of the bed? By chance you don't live just west of Stuart Court in Cotton Creek by Frontier Range College?
Thanks
Mark

ChevyDude · 06-12-2004, 03:41 PM

Bedsides are straight. The bed was media blasted and then shot in a white acid ethching primer. However, because they didn't put a sealer on it and I didn't paint it right away, the bed has developed suface rust where the sides and the floor go together. Metal floor is in good shape with a few of the usual pits and pin holes in some places. Drivers side bedside has a gas tank door put in and a filler neck that comes through the bed. I am selling because I want a wood floor bed.

I'm about 2 miles south from Front Range College. Just north of 92nd and east of Pierce in the West Cliff development. Walking distance to Mandalay Middle School.

06-12-2004, 12:16 PM	#1
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	What do fenders go for also SWB??? I have a set L/R fenders from my 71' swb that I did not use. They are original. straight, and in primer. I want to sell them but want to ask a fair price for both me and the buyer. Also I have a complete Short Wide Bed, missing the tailgate though that I want to sell. It is also straight and in primer, does have some surface rust and needs to be taken apart to finish correctly. Any input would be great. Thanks guys! __________________ Alex 1971 Lil' Red 350 SBC 700R4

06-12-2004, 01:14 PM	#2
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,144	Alex I would be interested in your box. Is it a metal floor and what shape is the inside of the bed? By chance you don't live just west of Stuart Court in Cotton Creek by Frontier Range College? Thanks Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

06-12-2004, 03:41 PM	#3
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Bedsides are straight. The bed was media blasted and then shot in a white acid ethching primer. However, because they didn't put a sealer on it and I didn't paint it right away, the bed has developed suface rust where the sides and the floor go together. Metal floor is in good shape with a few of the usual pits and pin holes in some places. Drivers side bedside has a gas tank door put in and a filler neck that comes through the bed. I am selling because I want a wood floor bed. I'm about 2 miles south from Front Range College. Just north of 92nd and east of Pierce in the West Cliff development. Walking distance to Mandalay Middle School. __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 06-12-2004 at 03:44 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.