FREE!! 72 lwb bed and frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

03glide · 06-18-2004, 07:25 AM

I have a 72 lwb bed and frame that someone can have if they will come pick it up. The bedsides are in real good condition. There is some rust in the floor near the front panel. There is a tailgate that is pretty beat up but it still opens and closes. There is a black painted bumper that is straight. I will be leaving the power steering box on the frame also. Here are a few pics and I can get more if needed.

03glide · 06-18-2004, 07:26 AM

The cab and wheels have been sold from this truck. You will need a flat bed to pick it up.

03glide · 06-18-2004, 07:28 AM

more567890

spencra · 06-18-2004, 10:18 AM

Damn! Why does it have to be in NC? Woulda been there in a heartbeat but it's a little bit of a ride for me.
Thanks for being so generous though.

03glide · 06-18-2004, 11:22 AM

I wish you were closer too. My wife is tired of looking at this stuff. I have parted most of this truck and didn't have any luck trying to sell the bed. Now I just want it gone. Someone get this stuff before it goes to the junkyard in a couple weeks.

Ice68 · 06-18-2004, 12:14 PM

I need a long bed for my '69, but too far away.

Thanks,
Leroy

spencra · 06-18-2004, 02:48 PM

Damn, you're gonna send it to the scrap heap. Your killing me.

If nobody else takes it soon I will be on vacation in a couple of weeks. I have family in Philly so I might take a trip down to visit. If i'm in the area I might take a trip down with my trailer.

How far would you say Fayetteville is from Philly. Say 4-5 hours sound about right?

1972ChevyGuy · 06-18-2004, 04:50 PM

How straight is the pass side bedside? ( as far as bondo or glass? )

wnc mountain · 06-18-2004, 11:29 PM

What all is included on the frame... front cross member, rear end, ect. you can pm me if you would like. thanks.

03glide · 06-27-2004, 08:29 PM

Sorry for the delayed response. I was on vacation last week. Not sure about the time to Philly. I know DC is about 4.5-5 hours. Mapquest should let you know. Front crossmember is in place but there are no suspension components left. There is no rear end in the truck. The rear coils are in place and the power steering gear box is left. There are also small block frame mounts.

03glide · 06-27-2004, 08:36 PM

some more pics.

3rdGenrationChevyman · 06-27-2004, 09:00 PM

boy I could use that bed... stupid miles... hey! you should move to NM & bring that bed with ya!

**ScottH** · 06-27-2004, 09:54 PM

If no one can use it, I could use the hardware from the tailgate (handle, linkage, etc.). No hurry and only if you get no other takers.

Thanks, and good luck with it.

Scott

06-18-2004, 07:25 AM	#1
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	FREE!! 72 lwb bed and frame I have a 72 lwb bed and frame that someone can have if they will come pick it up. The bedsides are in real good condition. There is some rust in the floor near the front panel. There is a tailgate that is pretty beat up but it still opens and closes. There is a black painted bumper that is straight. I will be leaving the power steering box on the frame also. Here are a few pics and I can get more if needed. Attached Images

06-18-2004, 07:28 AM	#3
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	more567890 Attached Images

06-18-2004, 10:18 AM	#4
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Damn! Why does it have to be in NC? Woulda been there in a heartbeat but it's a little bit of a ride for me. Thanks for being so generous though. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

06-18-2004, 12:14 PM	#6
Ice68 Registered User Join Date: Dec 2003 Location: NW New Mexico Posts: 236	Wow! I need a long bed for my '69, but too far away. Thanks, Leroy __________________ '68 Chevy Truck C10 LWB 292 engine 3spd Tranny Everything Stock except for shaved bodywork. '72 Chevy Truck Custom Deluxe 2WD LWB 350/350 HEI Tilt PS AC Dual Exhaust

06-18-2004, 02:48 PM	#7
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Damn, you're gonna send it to the scrap heap. Your killing me. If nobody else takes it soon I will be on vacation in a couple of weeks. I have family in Philly so I might take a trip down to visit. If i'm in the area I might take a trip down with my trailer. How far would you say Fayetteville is from Philly. Say 4-5 hours sound about right? __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

06-18-2004, 07:26 AM	#2
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	The cab and wheels have been sold from this truck. You will need a flat bed to pick it up.

06-18-2004, 11:22 AM	#5
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	I wish you were closer too. My wife is tired of looking at this stuff. I have parted most of this truck and didn't have any luck trying to sell the bed. Now I just want it gone. Someone get this stuff before it goes to the junkyard in a couple weeks.

06-18-2004, 04:50 PM	#8
1972ChevyGuy Registered User Join Date: Nov 2002 Location: Kannapolis, NC Posts: 552	How straight is the pass side bedside? ( as far as bondo or glass? ) Last edited by 1972ChevyGuy; 06-18-2004 at 04:55 PM.

06-18-2004, 11:29 PM	#9
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	What all is included on the frame... front cross member, rear end, ect. you can pm me if you would like. thanks. __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project

06-27-2004, 08:29 PM	#10
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	Sorry for the delayed response. I was on vacation last week. Not sure about the time to Philly. I know DC is about 4.5-5 hours. Mapquest should let you know. Front crossmember is in place but there are no suspension components left. There is no rear end in the truck. The rear coils are in place and the power steering gear box is left. There are also small block frame mounts.

06-27-2004, 08:36 PM	#11
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	some more pics. Attached Images

06-27-2004, 09:00 PM	#12
3rdGenrationChevyman What me ugly? Join Date: Jun 2004 Location: Albuquerque, NM Posts: 104	boy I could use that bed... stupid miles... hey! you should move to NM & bring that bed with ya! __________________ `70 C-10 LWB Big & Ugly, like its owner... 307 SB - 600 Holley, Offenhauser 360 - Muncie 465, 3:73 Posi, 33" BF-G`s I like my trucks like my women... big & old with 33" feet.

06-27-2004, 09:54 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	If no one can use it, I could use the hardware from the tailgate (handle, linkage, etc.). No hurry and only if you get no other takers. Thanks, and good luck with it. Scott



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.