06-21-2004, 12:46 AM | #1 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
It's Alive!!!!!!!
Had a couple problems with my truck:
front/rear seals on the transmission needed to be replaced flywheel was missing teeth starter crapped out First thing we did was tow the truck to my house. That was funny as hell. My dad drove his 85 1/2 ton suburban while I was in the truck to stop it and the suburban at the same time. We didn't have any problems towing it, except it's a ***** when you don't have power steering or power brakes. When we got it home we cleaned the transmission and pushed it into the driveway, Then we started working on it and got the trans. out, seals replaced, pan re-installed, etc. We finally got it mounted and hooked up about 4hrs later. Today we just put another starter on and fired it up. Without a muffler. Nothing but the y pipe that stopped at about the carrier bearing. Gonna put a 2 1/2" CherryBomb glasspack on it with a turndown tomorrow, that'll run about 30-35 bucks total. Will test drive on Tuesday and hopefully everything's right.
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
06-21-2004, 12:48 AM | #2 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Sounds like a lot of fun!
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
06-21-2004, 03:42 PM | #3 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Yeah, it was. 'Cept that it was over 95 degrees outside while we were working on it. The only shade we had was being under the truck. Just put the muffler on an hour ago and fired it up, runs great now that I adjusted the idle mixture and sounds sweet. I let it warm up and the transmission was full and didn't leak, so far so good. Tomorrow morning we'll find out if our work paid off.
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
06-21-2004, 03:52 PM | #4 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
I feel your pain brother, I am laying on a 90 degree concrete slab trying to get my truck back on the road. Everything I touch is blistering hot and I have to stop every 30 min. to cool off. Fun ain't it!
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
Bookmarks |
|
|