Like this wheel design? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XXL · 06-21-2004, 09:44 PM

Here's a wheel slammed67 CAD'd out. Would you let your truck wear these if they were available??

krue · 06-21-2004, 09:57 PM

If I were going to be low and chopped then I would consider them!

LUV2XCLR8 · 06-21-2004, 10:02 PM

2 MANY BOW'S 4 ME, ID KEEP THE 1 IN THE CENTER CAP, THE 5 ACTING AS
THE STAR, REMOVE THE SMALL ONES AROUND THE CENTER, AND CHANGE IT
TO RIVITS AROUND THE LIP. JUST MY $0.02 WORTH. NEAT CONCEPT. :p

MandarinSixSeven · 06-21-2004, 10:46 PM

Quote:

Originally Posted by LUV2XCLR8

2 MANY BOW'S 4 ME, ID KEEP THE 1 IN THE CENTER CAP, THE 5 ACTING AS
THE STAR, REMOVE THE SMALL ONES AROUND THE CENTER, AND CHANGE IT
TO RIVITS AROUND THE LIP. JUST MY $0.02 WORTH. NEAT CONCEPT. :p

I second this Idea exactly

robertwb · 06-21-2004, 11:24 PM

me third...just a little too busy with all those

post a redo with the changes

UltraDresser · 06-21-2004, 11:37 PM

I have to agree lil overboard on the bowtie's.... if people can't tell its a Chevy.... well theres not allot of hope for them anyway

Primered_69 · 06-21-2004, 11:41 PM

Well what about all us wonderful 6 lug people?

It is cool but I too bad Chevy would never let you make and sell them w/o a butt load of copyright payments.

Primered_69 · 06-21-2004, 11:42 PM

Would be cool to see the bowtie cut out to look like old school slots and the bowties running around the hoop to be deleted.

Deuce · 06-22-2004, 12:51 PM

Smooth lip(easier to clean too) and I think they would look awsome.

MMGOODIE · 06-22-2004, 01:50 PM

Without all of the bows and the proper lug configuration

Bamm · 06-22-2004, 02:06 PM

No, just can't see it. Maybe a billit bowtie-protruding 3-D looking center cap with a twisted vista styled rim would look good, but all those bowtie's just remind me of those "teddy bear" rims that were available a few years back. ............Jerry

inline6Bill · 06-22-2004, 04:06 PM

Agree fully with Primered69, make those things look like old school slots with bowtie openings, would look great IMHO. Existing wheels look to "Bling Bling"ish for me.

Alexis · 06-22-2004, 05:46 PM

kinda reminds me of these for some reason.

RON WOODGEARD · 06-22-2004, 06:48 PM

I like the Bowties around the rim but the ones connecting the center to the rim just do not fit..

YEA, maybe as a slot style...

**FRENCHBLUE72** · 06-22-2004, 08:28 PM

I think the cleaned up version is better...

Orange70chevy · 06-22-2004, 08:50 PM

Quote:

Originally Posted by Bamm 24

No, just can't see it. Maybe a billit bowtie-protruding 3-D looking center cap with a twisted vista styled rim would look good, but all those bowtie's just remind me of those "teddy bear" rims that were available a few years back. ............Jerry

I remember those crappy Teddy Bear rims some one down here had them they thought they were so cool. I wonder what he thinks of them now.

mr402 · 06-23-2004, 12:02 AM

I would liketo see what it looks like if the bow ties were actually openings in the rim but going around it like an aluminum slot. Still wouldn't do me much good on my GMC though. Cool concept!

XXL · 10-22-2004, 12:46 PM

Quote:

Originally Posted by Alexis

kinda reminds me of these for some reason.

$Bling$ I think slammed67 was involved in designing those as well

chickenwing · 10-22-2004, 03:00 PM

Neither one is workin for me. Think the slot idea has potential. I luv the bowtie but it's a little too sharp edged for the spokes. The bowties around the lip might work if they are etched into the wheel giving them a differant shade, or protruding from the lip if they are smoothed out kinda like a blister. Admire your cad skills. My .02.
Rich

HuggerCST · 10-22-2004, 03:55 PM

Quote:

Originally Posted by RON WOODGEARD

I like the Bowties around the rim but the ones connecting the center to the rim just do not fit..

YEA, maybe as a slot style...

Ditto

Brainchild · 10-22-2004, 07:12 PM

The spokes are too much for me.It would look better with lightning bolts or something maybe for spokes,and the bowties in the center and around the edges.Maybe not,I'm no designer<shrugs>

**N2TRUX** · 10-22-2004, 11:49 PM

They don't work for me at all because I don't like to add extra ornaments or logos to anything. I do think they woould look better if the bowtie was a cut out in the wheel, and sat at an angle to create a directional pattern....

'70 C/10 SS500 · 10-23-2004, 03:27 PM

Here is a quick first attempt for a slotted bowtie wheel. I'll try an angled slot later. What do you guys think?

'70 C/10 SS500 · 10-23-2004, 03:31 PM

Wheel only.

cableguy0 · 10-23-2004, 03:37 PM

the slotted bowtie looks a lot better than the spokes imo the spokes were too much but the slots me likey

View Poll Results: Would you put these on your Chevy truck?
Yeehah! I love bowties!	11	14.10%
Not happenin'	67	85.90%
Voters: 78. You may not vote on this poll

06-21-2004, 09:44 PM	#1
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Like this wheel design? Here's a wheel slammed67 CAD'd out. Would you let your truck wear these if they were available?? Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

06-21-2004, 09:57 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	If I were going to be low and chopped then I would consider them! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

06-21-2004, 10:02 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	2 MANY BOW'S 4 ME, ID KEEP THE 1 IN THE CENTER CAP, THE 5 ACTING AS THE STAR, REMOVE THE SMALL ONES AROUND THE CENTER, AND CHANGE IT TO RIVITS AROUND THE LIP. JUST MY $0.02 WORTH. NEAT CONCEPT. :p __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-21-2004, 11:24 PM	#5
robertwb Registered User Join Date: May 2003 Location: brooksville-fla Posts: 77	me third...just a little too busy with all those post a redo with the changes __________________ 1972 LWB 4x4 1970 LWB 2wd 1971 chevelle 1972 datsun PL-521/nissan

06-21-2004, 11:37 PM	#6
UltraDresser Registered User Join Date: Mar 2004 Location: Grayling, Michigan Posts: 34	I have to agree lil overboard on the bowtie's.... if people can't tell its a Chevy.... well theres not allot of hope for them anyway

06-21-2004, 11:41 PM	#7
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	Well what about all us wonderful 6 lug people? It is cool but I too bad Chevy would never let you make and sell them w/o a butt load of copyright payments. __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

06-21-2004, 11:42 PM	#8
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	Would be cool to see the bowtie cut out to look like old school slots and the bowties running around the hoop to be deleted. __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

06-22-2004, 12:51 PM	#9
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Smooth lip(easier to clean too) and I think they would look awsome. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

06-22-2004, 01:50 PM	#10
MMGOODIE I love doing it topless Join Date: Oct 2003 Location: MossyRock, WA Posts: 493	Without all of the bows and the proper lug configuration Attached Images __________________ Mikey "If you can read this, thank a teacher; If you are reading it in English, thank a soldier."

06-22-2004, 02:06 PM	#11
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	No, just can't see it. Maybe a billit bowtie-protruding 3-D looking center cap with a twisted vista styled rim would look good, but all those bowtie's just remind me of those "teddy bear" rims that were available a few years back. ............Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

06-22-2004, 04:06 PM	#12
inline6Bill A classic GM kinda guy Join Date: Mar 2004 Location: Phoenix, Arizona Posts: 296	Agree fully with Primered69, make those things look like old school slots with bowtie openings, would look great IMHO. Existing wheels look to "Bling Bling"ish for me. __________________ Old school rap music: a dual exhausted GM 6 with no mufflers. "If you can find a better vehicle, buy it" Lee Iacocca, Chrysler commercials of the '80s. "I did. They are called Classic GM pickups !!!"

06-22-2004, 05:46 PM	#13
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	kinda reminds me of these for some reason. Attached Images

06-22-2004, 06:48 PM	#14
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	I like the Bowties around the rim but the ones connecting the center to the rim just do not fit.. YEA, maybe as a slot style...

06-22-2004, 08:28 PM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	I think the cleaned up version is better...



Register or Log In To remove these advertisements.

06-23-2004, 12:02 AM	#17
mr402 Registered User Join Date: Jan 2004 Location: Elmira, Oregon Posts: 449	I would liketo see what it looks like if the bow ties were actually openings in the rim but going around it like an aluminum slot. Still wouldn't do me much good on my GMC though. Cool concept!

10-22-2004, 03:00 PM	#19
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Neither one is workin for me. Think the slot idea has potential. I luv the bowtie but it's a little too sharp edged for the spokes. The bowties around the lip might work if they are etched into the wheel giving them a differant shade, or protruding from the lip if they are smoothed out kinda like a blister. Admire your cad skills. My .02. Rich __________________ The truck... you hear that? No really, you did hear that?!!!

10-22-2004, 07:12 PM	#21
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	The spokes are too much for me.It would look better with lightning bolts or something maybe for spokes,and the bowties in the center and around the edges.Maybe not,I'm no designer<shrugs> __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

10-22-2004, 11:49 PM	#22
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	They don't work for me at all because I don't like to add extra ornaments or logos to anything. I do think they woould look better if the bowtie was a cut out in the wheel, and sat at an angle to create a directional pattern.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-23-2004, 03:27 PM	#23
'70 C/10 SS500 Registered User Join Date: Jun 2003 Location: Chandler, AZ Posts: 130	round one... Here is a quick first attempt for a slotted bowtie wheel. I'll try an angled slot later. What do you guys think? Attached Images

10-23-2004, 03:31 PM	#24
'70 C/10 SS500 Registered User Join Date: Jun 2003 Location: Chandler, AZ Posts: 130	one more... Wheel only. Attached Images

10-23-2004, 03:37 PM	#25
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	the slotted bowtie looks a lot better than the spokes imo the spokes were too much but the slots me likey __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

Register or Log In To remove these advertisements.