kuppla mo ?s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robby · 04-04-2002, 10:27 PM

1) can you use truck doors on a blazer?
2)what is the best plug gap to use with my HEI?
3)I haven't checked to see if the HEI is hooked up with full 12 volts-what will it do if it is not?

------------------
72 C-20 lwb 70 C-10 lwb
69 C-10 lwb
83 Silverado 4X4
Lamar,Missouri
Semper Fidelis

69 longhorn · 04-04-2002, 10:34 PM

I cant say on the doors. .045 on the plug gap,& run a 10 guage wire from IGN unfused on the lh side of the fuse box to the dist. You can clip out the stock yellow & white wires........69 longhorn.

*Fast68Chevy* · 04-04-2002, 10:37 PM

beat me by three minutes, lol

.045" is HEI gap
blazer doors are truck dorrs with glass frame hacked off, same thing, except blazwer oens have reinforce plate over exterior latch deal and have plastic caps on top of vent assembly and at rear top of door

------------------
Randy- Lincoln, IL
r68c30@hotmail.com

71 C-10, trying to assemble....sigh..
parting out 5.0LTPI '81 cutlass supreme brougham
*Paint is overrated
© RSS Enterprises 2000

[This message has been edited by Fast68Chevy (edited April 04, 2002).]

robby · 04-04-2002, 10:51 PM

I remembered the others
4)can I use the power steering pump and lines off of a 72 2 wheel drive on a 72 K5?
5)will a stripped cab fit into the bed of a longbed ? our years?
6)can you paint or color a steering wheel to match original color?
I was in Iowa for work this week and thought of all this stuff. Saw a good looking 70 K20 for sale on Hwy 71 in Spencer, Iowa.

04-04-2002, 10:27 PM	#1
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	kuppla mo ?s 1) can you use truck doors on a blazer? 2)what is the best plug gap to use with my HEI? 3)I haven't checked to see if the HEI is hooked up with full 12 volts-what will it do if it is not? ------------------ 72 C-20 lwb 70 C-10 lwb 69 C-10 lwb 83 Silverado 4X4 Lamar,Missouri Semper Fidelis __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)

04-04-2002, 10:34 PM	#2
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	I cant say on the doors. .045 on the plug gap,& run a 10 guage wire from IGN unfused on the lh side of the fuse box to the dist. You can clip out the stock yellow & white wires........69 longhorn. __________________ http://community.webshots.com/user/hotrodhorn

04-04-2002, 10:51 PM	#4
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	I remembered the others 4)can I use the power steering pump and lines off of a 72 2 wheel drive on a 72 K5? 5)will a stripped cab fit into the bed of a longbed ? our years? 6)can you paint or color a steering wheel to match original color? I was in Iowa for work this week and thought of all this stuff. Saw a good looking 70 K20 for sale on Hwy 71 in Spencer, Iowa. __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)

04-04-2002, 10:37 PM	#3
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	beat me by three minutes, lol .045" is HEI gap blazer doors are truck dorrs with glass frame hacked off, same thing, except blazwer oens have reinforce plate over exterior latch deal and have plastic caps on top of vent assembly and at rear top of door ------------------ Randy- Lincoln, IL r68c30@hotmail.com 71 C-10, trying to assemble....sigh.. parting out 5.0LTPI '81 cutlass supreme brougham *Paint is overrated © RSS Enterprises 2000 [This message has been edited by Fast68Chevy (edited April 04, 2002).]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.