F/S WI, 67-72 Long Bed Step Boards - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*dtlilly* · 07-09-2004, 01:02 AM

Trying to clean out the garage. These are rust and dent free, as I carried them with me from my move from Memphis.

Asking $40.00 for the pair plus shipping.

JJR · 07-09-2004, 07:55 AM

Do you/anybody know if these would be the same steps that would be used for a 66 C-10 LWB StepSide. I know the bedsides are the same but not sure about the steps. I have a friend of a friend restoring a 66 that could possibly use them if they are the same. Thanks.

**JIMs70GMC** · 07-09-2004, 09:56 AM

I'll take them, shipping to 23323 if JJR does not want them.

JJR · 07-09-2004, 10:17 AM

dtlilly, I was just checking for a friend of a friend so please go ahead and sell to Jim since he has a need for them and is ready to purchase now. I would still like to know if they are the same as a 66 model if anyone knows. My friends friend tends to buy new, so he will probably end up buying the new repop LWB steps for about $130 ea.

*dtlilly* · 07-09-2004, 10:40 AM

JJR, As far as I know, these boards are specific to the 67-72 model years. If there is anyone out there to confirm, please do

Jim, I'll be sending you a PM as soon as I know shipping.

Thanks, Don

**JIMs70GMC** · 07-09-2004, 10:45 AM

Sounds good.

I believe the fenders are different and therefore where the step mounts to the fender is different. I'm positive the only parts interchangeable are the sides, bed front and tailgate.

*dtlilly* · 07-09-2004, 05:05 PM

PM sent with total, Thanks, Don

**JIMs70GMC** · 07-10-2004, 04:00 PM

Got it. Sent one back. Thanks!

MOTHERTRUCKERS · 07-10-2004, 10:20 PM

Bedsides are different also.

**JIMs70GMC** · 07-10-2004, 10:54 PM

Thanks Ed!

07-09-2004, 01:02 AM	#1
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	F/S WI, 67-72 Long Bed Step Boards Trying to clean out the garage. These are rust and dent free, as I carried them with me from my move from Memphis. Asking $40.00 for the pair plus shipping. Attached Images

07-09-2004, 07:55 AM	#2
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Do you/anybody know if these would be the same steps that would be used for a 66 C-10 LWB StepSide. I know the bedsides are the same but not sure about the steps. I have a friend of a friend restoring a 66 that could possibly use them if they are the same. Thanks. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

07-09-2004, 09:56 AM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	I'll take them, shipping to 23323 if JJR does not want them. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-09-2004, 10:17 AM	#4
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	dtlilly, I was just checking for a friend of a friend so please go ahead and sell to Jim since he has a need for them and is ready to purchase now. I would still like to know if they are the same as a 66 model if anyone knows. My friends friend tends to buy new, so he will probably end up buying the new repop LWB steps for about $130 ea. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

07-09-2004, 10:45 AM	#6
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Sounds good. I believe the fenders are different and therefore where the step mounts to the fender is different. I'm positive the only parts interchangeable are the sides, bed front and tailgate. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-09-2004, 10:40 AM	#5
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	JJR, As far as I know, these boards are specific to the 67-72 model years. If there is anyone out there to confirm, please do Jim, I'll be sending you a PM as soon as I know shipping. Thanks, Don

07-09-2004, 05:05 PM	#7
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	PM sent with total, Thanks, Don

07-10-2004, 04:00 PM	#8
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Got it. Sent one back. Thanks! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-10-2004, 10:20 PM	#9
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Bedsides are different also. __________________ Rest in Peace Ed. Thanks for all the good times.

07-10-2004, 10:54 PM	#10
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Thanks Ed! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.