Blazer Tub Worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vtblazer · 07-13-2004, 03:47 PM

Whats a truly RUST FREE blazer tub really worth?
Options include -
1) a tub only
2) tub and tail gate
3) tub, tail gate with doors
4) tub, tail gate, doors and complete front clip.
Let's say it was a complete tub with doors,tail gate and front clip sitting on a 4x4 frame...with the hard top.
What would something like this be worth?

Huck · 07-13-2004, 04:03 PM

Now that's a tough question---Big O had a stripped one last year for $650.---But, a truly rust free tub is hard to find east of the rockies. If we add up the parts----doors=$300, tailgate=$250, front clip=$500. 4x4 frame=?, hard top=$350. (assuming good gate) and the tub-----I would put the package at around $2500. to $3500. east of the Rockies. If it's in California and I had to have it transported-----that would cost another $1,000. so I would subtract that from my $3500. estimate. There are lots of unknown's here like---glass, trim, interior, auto/4speed, 350 or ?, wheels, paint, seats, dents, etc. On a Blazer, the do-da's can cost a ton---sunvisors, seat belts, rear seat hold down's, spare mount, interior rear quarter panel's, TOW HOOKS, lift's, etc. My .02-----

LUV2XCLR8 · 07-13-2004, 04:48 PM

HEY VT, CHECK THIS BAD BOY OUT

http://67-72chevytrucks.com/vboard/s....php3?t=111586

vtblazer · 07-13-2004, 05:21 PM

HUCK, very thorough break down, thanks.
The tub will be done and ready to use including glass...no dents, no rust.
Tub will be sprayed with epoxy primer.
All the underdash parts will be intact. It even has a 3/4 ton master/booster with it.
Who ever responds when it goes up for sale will have the option of whatever they want beginning with the tub and 4x4 frame that's also been blasted and painted...they can add from there, doors, gate, front clip, complete interior (black), auto or 4spd tranny (have both 205 t-cases) and a decent top.

**jamie72** · 07-13-2004, 05:40 PM

i bought a very nice,very little bondo tub only last fall for 350.00..
its a hard qustion to answer,its where your at,and where it is...

jamie

aduff · 07-13-2004, 07:55 PM

Im looking for that "good " tub. My 72's tub was split for rust and panel repair without any supports or jig. I learned my leason now, but need a tub to replace the mess I created.

blazerholic · 07-13-2004, 09:01 PM

Put me in line for this bad boy! When do you plan on having her ready??? I'd be after everything with the 4spd. what $ you lookin for?

vtblazer · 07-13-2004, 09:20 PM

Hopefully it will be done within the next month.
When I described it as a tub and frame, that's pretty much the set-up,
I'm thinking about keeping the front and rear axels from it but I'm sure I can find something to put under it so it's at least a rolling chassis.
As far as the $$ goes, it all depends on how many other parts you'd want.

blazerholic · 07-13-2004, 10:19 PM

I'd need the tub, doors, gate, front clip (don't need grille), and the interior. Wouldn't need the hardtop, transfer case or tranny as I think about it. Is the wiring harness still intact?

Not tryin to jump line on ya aduff, just askin the nessesary ??s

07-13-2004, 03:47 PM	#1
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Blazer Tub Worth? Whats a truly RUST FREE blazer tub really worth? Options include - 1) a tub only 2) tub and tail gate 3) tub, tail gate with doors 4) tub, tail gate, doors and complete front clip. Let's say it was a complete tub with doors,tail gate and front clip sitting on a 4x4 frame...with the hard top. What would something like this be worth?

07-13-2004, 04:48 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	HEY VT, CHECK THIS BAD BOY OUT http://67-72chevytrucks.com/vboard/s....php3?t=111586 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-13-2004, 05:40 PM	#5
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	i bought a very nice,very little bondo tub only last fall for 350.00.. its a hard qustion to answer,its where your at,and where it is... jamie __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

07-13-2004, 07:55 PM	#6
aduff Registered User Join Date: Jun 2004 Location: Overland Park, KS (suburb of Kansas City) Posts: 7	Im looking for that "good " tub. My 72's tub was split for rust and panel repair without any supports or jig. I learned my leason now, but need a tub to replace the mess I created. __________________ Angus Overland Park, Kansas Wife 4 Kids 1971 Blazer (mykids have never seen it run ) 2000 Jeep Cherokee (my main rig) 2001 Grand Caravan AWD (at least it drives all four)

07-13-2004, 09:01 PM	#7
blazerholic I am a Gov't Mule Join Date: Aug 2003 Location: Latonia,Ky Posts: 276	Put me in line for this bad boy! When do you plan on having her ready??? I'd be after everything with the 4spd. what $ you lookin for? __________________ ...to die in the saddle must be my destiny, to ride this rockin' horse I must be crazy...

07-13-2004, 04:03 PM	#2
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Now that's a tough question---Big O had a stripped one last year for $650.---But, a truly rust free tub is hard to find east of the rockies. If we add up the parts----doors=$300, tailgate=$250, front clip=$500. 4x4 frame=?, hard top=$350. (assuming good gate) and the tub-----I would put the package at around $2500. to $3500. east of the Rockies. If it's in California and I had to have it transported-----that would cost another $1,000. so I would subtract that from my $3500. estimate. There are lots of unknown's here like---glass, trim, interior, auto/4speed, 350 or ?, wheels, paint, seats, dents, etc. On a Blazer, the do-da's can cost a ton---sunvisors, seat belts, rear seat hold down's, spare mount, interior rear quarter panel's, TOW HOOKS, lift's, etc. My .02-----

07-13-2004, 05:21 PM	#4
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	HUCK, very thorough break down, thanks. The tub will be done and ready to use including glass...no dents, no rust. Tub will be sprayed with epoxy primer. All the underdash parts will be intact. It even has a 3/4 ton master/booster with it. Who ever responds when it goes up for sale will have the option of whatever they want beginning with the tub and 4x4 frame that's also been blasted and painted...they can add from there, doors, gate, front clip, complete interior (black), auto or 4spd tranny (have both 205 t-cases) and a decent top.

07-13-2004, 09:20 PM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Blazer Tub Hopefully it will be done within the next month. When I described it as a tub and frame, that's pretty much the set-up, I'm thinking about keeping the front and rear axels from it but I'm sure I can find something to put under it so it's at least a rolling chassis. As far as the $$ goes, it all depends on how many other parts you'd want.

07-13-2004, 10:19 PM	#9
blazerholic I am a Gov't Mule Join Date: Aug 2003 Location: Latonia,Ky Posts: 276	I'd need the tub, doors, gate, front clip (don't need grille), and the interior. Wouldn't need the hardtop, transfer case or tranny as I think about it. Is the wiring harness still intact? Not tryin to jump line on ya aduff, just askin the nessesary ??s __________________ ...to die in the saddle must be my destiny, to ride this rockin' horse I must be crazy...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.