HELP. reproduction fenders???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jugernot · 07-16-2004, 01:14 AM

I have searched for months trying to locate an original clean rust free 68 passenger fender. Well I have not found one, or found anyone who was willing to ship it to me. So my last opition is to buy a reproduction fender. I would like to hear anyone's story on their experiences with the rerpo fenders. One of my questions is if I have to use one repro fender, should I replace the original with a repro aswell?

Thanks, Julius

junkyardjohn · 07-16-2004, 04:39 AM

SH!T JULIUS.. I PROBABLY HAVE A CLEAN RUSTFREE 68 PASS FENDER THAT I'LL SHIP YOU FOR $125 + SHIPPING. I PROBABLY HAVE 2 DOZEN FENDERS & I DON'T NORMALLY SHIP EM, BUT IF YOU REALLY NEED ONE, I WILL.

JOHN AT FK9U812@AOL.COM

Huck · 07-16-2004, 07:23 AM

Originals fit better (not perfect but a lot better) then the repop's. One weak area on the repops is right on the front top where they make the bend-- on the inner edge that aligns with the hood---tends to be a weak point. Before I would you spend $125. + tax for a repop, I would take John up on his original as his stuff is better then any repop. I've used both and my preference is always original stuff if the price and condition is close. Be sure to prep and protect the inner ----lower pockets and upper seam where the inner/outer meet. I like Eastwoods rust protector over POR15 as it is safer, easier, and from independent reports, works better against rust. Huck

jugernot · 07-16-2004, 11:37 PM

Thanks Junk Yard John and Hank. John I have sent you PM and an E-mail.

jugernot · 07-16-2004, 11:38 PM

Sorry, Its Huck not Hank.

07-16-2004, 01:14 AM	#1
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	HELP. reproduction fenders???? I have searched for months trying to locate an original clean rust free 68 passenger fender. Well I have not found one, or found anyone who was willing to ship it to me. So my last opition is to buy a reproduction fender. I would like to hear anyone's story on their experiences with the rerpo fenders. One of my questions is if I have to use one repro fender, should I replace the original with a repro aswell? Thanks, Julius __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

07-16-2004, 04:39 AM	#2
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	SH!T JULIUS.. I PROBABLY HAVE A CLEAN RUSTFREE 68 PASS FENDER THAT I'LL SHIP YOU FOR $125 + SHIPPING. I PROBABLY HAVE 2 DOZEN FENDERS & I DON'T NORMALLY SHIP EM, BUT IF YOU REALLY NEED ONE, I WILL. JOHN AT FK9U812@AOL.COM __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

07-16-2004, 07:23 AM	#3
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Repop fenders Originals fit better (not perfect but a lot better) then the repop's. One weak area on the repops is right on the front top where they make the bend-- on the inner edge that aligns with the hood---tends to be a weak point. Before I would you spend $125. + tax for a repop, I would take John up on his original as his stuff is better then any repop. I've used both and my preference is always original stuff if the price and condition is close. Be sure to prep and protect the inner ----lower pockets and upper seam where the inner/outer meet. I like Eastwoods rust protector over POR15 as it is safer, easier, and from independent reports, works better against rust. Huck

07-16-2004, 11:37 PM	#4
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Thanks Junk Yard John and Hank. John I have sent you PM and an E-mail. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

07-16-2004, 11:38 PM	#5
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Sorry, Its Huck not Hank. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.