this weeks progress body pics - Project 72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mountain Man · 07-16-2004, 02:54 PM

Well the body shop is on schedule to be completed - including base/clear two tone, by end of July. Here are some pics of some new patch panel welded in. No more rust - Yipee!!!!!!!!!!!!!!

This is one of the new cab corners. Still needs a little sanding

Mountain Man · 07-16-2004, 02:57 PM

One of the new front fender bottom corners.

Mountain Man · 07-16-2004, 02:59 PM

this is a pic of fabricated metal covering up the toolbox opening. I would have liked to have saved the toolbox feature, but the door/hinges were to far gone to save it. Can't even tell it existed now. I left the bin in the truck behind the metal.

Mountain Man · 07-16-2004, 03:08 PM

Last one - had to get a small piece of metal welded into the lower front fender on this side - it was rusted thru under the woodgrain trim.

Hopefully the next pics you will see will be of when Project 72 has a new fresh base/clear paint job on it. I am going back with original medium blue/white two tone. My camera makes the color look green but it is actually medium blue.

silvertonguedevil · 07-16-2004, 03:09 PM

Lookin' good!!

**Canadian694x4** · 07-16-2004, 04:05 PM

Looks Good! If your not using the tool box you might wanna take it outta there and see if you can sell it to someone who may need it if it's not in use anyways...could try to get a few $$$ for it.

**Yukon Jack** · 07-17-2004, 08:35 AM

Hope they stay on schedule for you, can't wait to see it finished.

LUV2XCLR8 · 07-17-2004, 08:51 AM

LOOKIN GOOD, IT WILL B NICE WHEN FINISHED

**Palf70Step** · 07-17-2004, 09:09 AM

Looks good!

krue · 07-17-2004, 11:23 AM

Looks like good work!

07-16-2004, 02:54 PM	#1
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	this weeks progress body pics - Project 72 Well the body shop is on schedule to be completed - including base/clear two tone, by end of July. Here are some pics of some new patch panel welded in. No more rust - Yipee!!!!!!!!!!!!!! This is one of the new cab corners. Still needs a little sanding __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

07-16-2004, 02:57 PM	#2
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	One of the new front fender bottom corners. __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

07-16-2004, 02:59 PM	#3
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	this is a pic of fabricated metal covering up the toolbox opening. I would have liked to have saved the toolbox feature, but the door/hinges were to far gone to save it. Can't even tell it existed now. I left the bin in the truck behind the metal. __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

07-16-2004, 03:08 PM	#4
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	Last one - had to get a small piece of metal welded into the lower front fender on this side - it was rusted thru under the woodgrain trim. Hopefully the next pics you will see will be of when Project 72 has a new fresh base/clear paint job on it. I am going back with original medium blue/white two tone. My camera makes the color look green but it is actually medium blue. __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

07-16-2004, 03:09 PM	#5
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Lookin' good!! __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

07-16-2004, 04:05 PM	#6
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Looks Good! If your not using the tool box you might wanna take it outta there and see if you can sell it to someone who may need it if it's not in use anyways...could try to get a few $$$ for it. __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

07-17-2004, 08:35 AM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Hope they stay on schedule for you, can't wait to see it finished. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-17-2004, 08:51 AM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	LOOKIN GOOD, IT WILL B NICE WHEN FINISHED __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-17-2004, 09:09 AM	#9
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,755	Looks good! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-17-2004, 11:23 AM	#10
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Looks like good work! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.