i piece swb drive line f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 07-19-2004, 03:33 PM

works with swb with a 350 trans. $60.00 plus shipping

stllookn · 07-19-2004, 04:35 PM

I am curious as to the length of it? I have a one piece in my swb with a 283 in the I-6 holes with a PG (same length as the TH350). I am wanting to move to the V-8 holes but it looks like the drive line will be short. I am sure it will cost about $100 to shorten and rebalance so yours might be a better alternative. Mine measures 56.5 center to center on the u-joints.

billsbowtie · 07-19-2004, 11:02 PM

my drive line measures 58 1/2 inches center ujoint to center ujoint thanks

super-k · 07-21-2004, 07:47 AM

What part of VA is Rose Hill in?I`m in the MD/VA/WVA panhandle area(Shenendoah-Potomac confluence).`cause that is just what I need.I`m swapping a 350/TH400 into a SWB that has a 6cyl/3spd.

billsbowtie · 07-21-2004, 08:47 AM

i am in the very southwestern part of va where tn ,ky,and va all meet

super-k · 07-23-2004, 06:09 AM

A little far to come pick up.I wunder what shipping would cost to 21771?Is it the driveshaft only,no u-joints?

*Tanker350* · 07-23-2004, 05:19 PM

There was also a driveshaft that came in the GMC'S I6 three speed, one piece, measuring 67.5 from eye to eye. I have one I'm trying to get rid of if these guys cant help you out...

billsbowtie · 07-23-2004, 09:43 PM

super-k pm sent

07-19-2004, 03:33 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i piece swb drive line f/s works with swb with a 350 trans. $60.00 plus shipping

07-19-2004, 04:35 PM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I am curious as to the length of it? I have a one piece in my swb with a 283 in the I-6 holes with a PG (same length as the TH350). I am wanting to move to the V-8 holes but it looks like the drive line will be short. I am sure it will cost about $100 to shorten and rebalance so yours might be a better alternative. Mine measures 56.5 center to center on the u-joints. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

07-21-2004, 07:47 AM	#4
super-k Registered User Join Date: May 2004 Location: Mt.Airy,MD Posts: 123	What part of VA is Rose Hill in?I`m in the MD/VA/WVA panhandle area(Shenendoah-Potomac confluence).`cause that is just what I need.I`m swapping a 350/TH400 into a SWB that has a 6cyl/3spd. __________________ 72CheyenneSuperK20CustomCamper350/TH350,A/C 72SierreGrandeK2500350/TH350,A/C 72CustomDeluxeK20CustomCamperSB400/4SPD.A/C 72CustomC10SWB,TH400,project

07-23-2004, 06:09 AM	#6
super-k Registered User Join Date: May 2004 Location: Mt.Airy,MD Posts: 123	A little far to come pick up.I wunder what shipping would cost to 21771?Is it the driveshaft only,no u-joints? __________________ 72CheyenneSuperK20CustomCamper350/TH350,A/C 72SierreGrandeK2500350/TH350,A/C 72CustomDeluxeK20CustomCamperSB400/4SPD.A/C 72CustomC10SWB,TH400,project

07-19-2004, 11:02 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	my drive line measures 58 1/2 inches center ujoint to center ujoint thanks

07-21-2004, 08:47 AM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i am in the very southwestern part of va where tn ,ky,and va all meet

07-23-2004, 05:19 PM	#7
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	There was also a driveshaft that came in the GMC'S I6 three speed, one piece, measuring 67.5 from eye to eye. I have one I'm trying to get rid of if these guys cant help you out...

07-23-2004, 09:43 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	super-k pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.