What's it worth? small block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67sub · 07-21-2004, 09:56 AM

Ok I need to sell the 350 and th400 out of my suburban and I'm not sure what to ask. The 350 is .030 over with an edelbrock cam, holley intake, edelbrock carb, mallory distributor, ceramic coated dynomax long tube headers, and was rebuilt last year. The trans was also rebuilt last year and motor and trans only have about 1500 -1800 miles on them. These are not the originals out of the sub. I am trading the suburban body and the guy does not want the motor/tranny. Any thoughts on how much I should ask ?

stllookn · 07-21-2004, 01:04 PM

Maybe this benchmark will help. I just sold a 4-bolt 350 (95,000+ miles on '72) with Holley, stock water pump, alternator, stock manifolds, and starter for $300. Ran fine with no smoke. Your engine is much nicer, rebuilt and with the TH400 should bring much more. I would do a compression check and show the numbers to potential buyers...let them hear it run and even drive it...that works wonders and should overcome their uneasiness with no guarantee.

Location will play a part in how much people are willing to pay...I am in the NW. No matter what is on the engine they will always compare it to what they will pay for a new crate engine from the cheap ads...about $800 here. They may not want the tranny so consider selling it separately.

I hope that helps...good luck!

mhicks · 07-21-2004, 01:26 PM

Let me know when you come up with a number.

Larry68GMC · 07-21-2004, 01:31 PM

Let me know also, I'm looking to buy soon...

**PICKMUP** · 07-21-2004, 02:18 PM

There's a GM crate 350 w/th400 in local paper, asking $600.

07-21-2004, 09:56 AM	#1
67sub Registered User Join Date: Aug 2003 Location: D/FW TX Posts: 430	What's it worth? small block Ok I need to sell the 350 and th400 out of my suburban and I'm not sure what to ask. The 350 is .030 over with an edelbrock cam, holley intake, edelbrock carb, mallory distributor, ceramic coated dynomax long tube headers, and was rebuilt last year. The trans was also rebuilt last year and motor and trans only have about 1500 -1800 miles on them. These are not the originals out of the sub. I am trading the suburban body and the guy does not want the motor/tranny. Any thoughts on how much I should ask ? __________________ 2004 Kawasaki KLR Always looking for a cheap driver

07-21-2004, 01:04 PM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Maybe this benchmark will help. I just sold a 4-bolt 350 (95,000+ miles on '72) with Holley, stock water pump, alternator, stock manifolds, and starter for $300. Ran fine with no smoke. Your engine is much nicer, rebuilt and with the TH400 should bring much more. I would do a compression check and show the numbers to potential buyers...let them hear it run and even drive it...that works wonders and should overcome their uneasiness with no guarantee. Location will play a part in how much people are willing to pay...I am in the NW. No matter what is on the engine they will always compare it to what they will pay for a new crate engine from the cheap ads...about $800 here. They may not want the tranny so consider selling it separately. I hope that helps...good luck! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

07-21-2004, 01:31 PM	#4
Larry68GMC Registered User Join Date: Aug 2001 Location: Midwest City, OK Posts: 289	Let me know also, I'm looking to buy soon... __________________ 71 GMC LWB 350, Dart Pro1's 200/64cc,10.2:1 RPM AirGap, 224/234 @50 496/518 lift w/1.6 roller rockers, 2500 stall '05 Dodge 2500 Crew Cab 4x4, 4 inch lift and 35's CTD

07-21-2004, 02:18 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	There's a GM crate 350 w/th400 in local paper, asking $600. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-21-2004, 01:26 PM	#3
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Let me know when you come up with a number.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.