header Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 07-22-2004, 08:54 PM

I am installing my headers tommorw morning. Test fit the passenger side just know.

As for starter wires how far from the headers would be safe?

They are jet hot coated inside and out.

Thanks

beaterC10 · 07-22-2004, 09:50 PM

I have a set of uncoated headers on my 84 daily driver. My starter wiring runs along the passenger valve cover and intake, down the front, and is in the stock clips attached to the side of the block. The only casualty in 5 years was the black plastic flex loom near the starter has melted. Never have any starting problems with my 350.

Dave

07-22-2004, 08:54 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	header Question I am installing my headers tommorw morning. Test fit the passenger side just know. As for starter wires how far from the headers would be safe? They are jet hot coated inside and out. Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

07-22-2004, 09:50 PM	#2
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I have a set of uncoated headers on my 84 daily driver. My starter wiring runs along the passenger valve cover and intake, down the front, and is in the stock clips attached to the side of the block. The only casualty in 5 years was the black plastic flex loom near the starter has melted. Never have any starting problems with my 350. Dave



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.