Looking for a center console for a 72 Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamharvey · 07-23-2004, 07:39 PM

thanks

teeitup · 07-23-2004, 07:44 PM

I got some around here, some need put together and painted some are complete but need painted, some have a few cracks but not bad. $40 plus shipping. cup holder style and seat belt holder style. Thanks Randy

teeitup · 07-23-2004, 11:04 PM

here is one with cup holders

ap4573 · 07-24-2004, 01:01 AM

forgive my ignorance but what is seatblet style?

**CUSTOM/10** · 07-24-2004, 07:13 AM

The seat belt holder type has rectangular openings instead of the round cup holders. These were the original type for the 69-72 trucks & blazers. The cup holder type started being used around 73. I have seen both types in the 73s. I also have a couple of consoles kicking around, I collected when I was looking for one for myself. One refurbished one not. Either would be very nice for a daily driver. No pic,s of them at this time, but I may be able to take some this week if you want. Haven't really thought about a price, probably $75 - $100 range + shipping.

Gary

teeitup · 07-24-2004, 07:56 PM

Here is another one I have, it has a crack in it, see pic, also one extra drilled hole in bottom.

**CUSTOM/10** · 07-29-2004, 09:11 AM

1st time posting my own pic,s hopefully this will work. I restored this console to use for myself, it had two small cracks in the top near the crome trim that I repaired with epoxy, and a couple of small cracks around one of the mounting holes in the bottom. The trim has some rust. Overall this is a solid piece and would be a nice daily drive console. $75 + shipping.

**CUSTOM/10** · 07-29-2004, 09:17 AM

This is a very nice unrestored console with only one very minor crack ( shown next to the screw ) and some rust on the trim. $100 + shipping. I have more pic,s of both if you want to see them.

LUV2XCLR8 · 07-29-2004, 04:16 PM

DAMN TEEITUP, THAT IS A LOT OF KITTY LITTER.

**yellowblazer1969** · 07-30-2004, 04:45 PM

Hi I Have Several Consoles In Various Colors All Are Restored And Look Awsome. One Is On Ebay Now The Others Are Aslo For Sale. The Console Is Listed Under Consoles And Parts I HAVE PICS BUT THE FILES ARE TOO BIG TO UPLOAD, CHRISLIVS@HOTMAIL.COM
Good Luck, Chris

03glide · 08-13-2004, 10:12 PM

CUSTOM/10- Do you still have the black console. PM sent.

**CUSTOM/10** · 08-16-2004, 08:52 AM

03glide

These are the best images I was able to get of the repairs. You can still see the small crack next to the screw holding the cable, and a similar crack was repaired on the opposite side of the console, but is difficult to even pick it out. Both cracks were reinforest from the inside with epoxy.
You can also see the rust on the crome trim. The hinge has no rust.

03glide · 08-16-2004, 11:13 AM

CUSTOM/10-Shipping to 28357?

**CUSTOM/10** · 08-16-2004, 11:23 AM

03glide

I'll get back to you on the shipping cost.

**CUSTOM/10** · 08-17-2004, 01:48 PM

03glide,

UPS Ground = $15.00 ( 3-4 working days )

Fedex Saver = $38.00

I have it in an over sized box with 4" of foam all around it. Should be fine even with a bit of banging around.

Gary

67ChevyC10Stepside · 08-17-2004, 02:11 PM

are these consoles the same as truck ones?

**CUSTOM/10** · 08-17-2004, 02:47 PM

The truck & blazer consoles are the same. In some of the mid 70's blazers and maybe the trucks there's a mounting bracket that goes under the console to level it, but the console it self is the same.

07-23-2004, 07:39 PM	#1
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Looking for a center console for a 72 Blazer thanks

07-23-2004, 07:44 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I got some around here, some need put together and painted some are complete but need painted, some have a few cracks but not bad. $40 plus shipping. cup holder style and seat belt holder style. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-23-2004, 11:04 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	here is one with cup holders __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-24-2004, 07:13 AM	#5
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,808	Console The seat belt holder type has rectangular openings instead of the round cup holders. These were the original type for the 69-72 trucks & blazers. The cup holder type started being used around 73. I have seen both types in the 73s. I also have a couple of consoles kicking around, I collected when I was looking for one for myself. One refurbished one not. Either would be very nice for a daily driver. No pic,s of them at this time, but I may be able to take some this week if you want. Haven't really thought about a price, probably $75 - $100 range + shipping. Gary Attached Images Last edited by CUSTOM/10; 08-17-2004 at 03:14 PM.

07-24-2004, 07:56 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Here is another one I have, it has a crack in it, see pic, also one extra drilled hole in bottom. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-24-2004, 01:01 AM	#4
ap4573 Registered User Join Date: Apr 2004 Location: san antonio, tx Posts: 39	forgive my ignorance but what is seatblet style?

07-29-2004, 09:11 AM	#7
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,808	Black console 1st time posting my own pic,s hopefully this will work. I restored this console to use for myself, it had two small cracks in the top near the crome trim that I repaired with epoxy, and a couple of small cracks around one of the mounting holes in the bottom. The trim has some rust. Overall this is a solid piece and would be a nice daily drive console. $75 + shipping. Attached Images

07-29-2004, 09:17 AM	#8
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,808	Red Console This is a very nice unrestored console with only one very minor crack ( shown next to the screw ) and some rust on the trim. $100 + shipping. I have more pic,s of both if you want to see them. Attached Images Last edited by CUSTOM/10; 07-29-2004 at 09:21 AM.

07-29-2004, 04:16 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	DAMN TEEITUP, THAT IS A LOT OF KITTY LITTER. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-30-2004, 04:45 PM	#10
yellowblazer1969 Registered User Join Date: Jul 2004 Location: columbia sc Posts: 387	Great Console Hi I Have Several Consoles In Various Colors All Are Restored And Look Awsome. One Is On Ebay Now The Others Are Aslo For Sale. The Console Is Listed Under Consoles And Parts I HAVE PICS BUT THE FILES ARE TOO BIG TO UPLOAD, CHRISLIVS@HOTMAIL.COM Good Luck, Chris Last edited by yellowblazer1969; 07-30-2004 at 04:48 PM.

08-13-2004, 10:12 PM	#11
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	CUSTOM/10- Do you still have the black console. PM sent.

08-16-2004, 08:52 AM	#12
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,808	Console repairs. 03glide These are the best images I was able to get of the repairs. You can still see the small crack next to the screw holding the cable, and a similar crack was repaired on the opposite side of the console, but is difficult to even pick it out. Both cracks were reinforest from the inside with epoxy. You can also see the rust on the crome trim. The hinge has no rust. Attached Images Last edited by CUSTOM/10; 08-16-2004 at 09:06 AM.

08-16-2004, 11:13 AM	#13
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	CUSTOM/10-Shipping to 28357?

08-16-2004, 11:23 AM	#14
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,808	Shipping ??? 03glide I'll get back to you on the shipping cost.

08-17-2004, 01:48 PM	#15
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,808	Shipping 03glide, UPS Ground = $15.00 ( 3-4 working days ) Fedex Saver = $38.00 I have it in an over sized box with 4" of foam all around it. Should be fine even with a bit of banging around. Gary



Register or Log In To remove these advertisements.

08-17-2004, 02:11 PM	#16
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	are these consoles the same as truck ones? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

08-17-2004, 02:47 PM	#17
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,808	Consoles The truck & blazer consoles are the same. In some of the mid 70's blazers and maybe the trucks there's a mounting bracket that goes under the console to level it, but the console it self is the same.

Register or Log In To remove these advertisements.