WTB green seatbelt buckle end - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 07-28-2004, 09:15 PM

I'm needing to put a center lap belt into my truck.

Need just the end of the green seatbelt. The latch and such. Seatbelt can be trashed out or cut off. No retractor needed. We're going to be replacing the belt itself with new green seatbelt webbing.

Tx Firefighter · 07-28-2004, 09:19 PM

Per She Ate you Looking.....

**Ironhorse** · 07-28-2004, 10:11 PM

May be able to help. Will check tomorrow after work, parting out a ' 71 that has original green belts. Still in the cab, not a complete set so may have the part you need. Not sure of the condition, do you have a color code from the glove box door or from the belt itself?

Tx Firefighter · 07-28-2004, 10:15 PM

I'll look at the code tomorrow and get back to you.

Thanks,
Kevin

Tx Firefighter · 07-30-2004, 04:43 PM

Take this rascal back to the tippy top.

My little girl needs a seat belt so her car seat will quit sliding into the floor every time I hit the brakes.

*** I'm kidding of course, I have her car seat tied in place with old shoe laces and electrical wire***

Harold Shepard · 07-30-2004, 04:50 PM

TX I saw some today in a sub. are yours the lighter green color, these are in good shape except they are faded. Let me know, Harold

Tx Firefighter · 07-30-2004, 04:53 PM

Yes, mine are light green. Pretty much exact color of dash and steering wheel in above picture. Remember, I don't care about the belt webbing itself, just the buckle and part that clicks into the buckle. I'll be re-webbing them all to match with new webbing. Just take a knife and slice the ends off. Don't worry about unbolting the whole thing.

I'd go say 10ish bucks for this stuff, plus shipping of course.

**Ironhorse** · 07-30-2004, 06:36 PM

Tx, Went and looked at the belts in the parts truck and found: #4K71 Robbins #9300 printed on the tag. Appears to be same green as in your pic. Have one buckled end minus the plastic cover, webbing good but needs cleaning. Have the passenger side Inner belt with good buckle, cover and GM sticker intact with very minor scuffing on cover, and also outer belt complete with stiffner which has some black paint on it which cleans off easily. Would do $10 plus shipping for all, if interested let me know. Thanks, Ironhorse

Tx Firefighter · 07-30-2004, 06:45 PM

Is it this color?

If so, I'm in like Flynn.

**Ironhorse** · 07-30-2004, 06:49 PM

Tx, That's the one I have. Do you want all the parts/ belts I have or just the buckled portion?

Tx Firefighter · 07-30-2004, 06:55 PM

Send me the buckle part and two of the end eye parts that bolt to the floor. That way, with new webbing, I'll have a complete lap belt.

Shipping is to 76086. Cash, money order, Paypal?

**Ironhorse** · 07-30-2004, 07:11 PM

Tx, Can do. Will get a shipping cost and send you a PM. Money Order works for me. Regards, Ironhorse

07-28-2004, 09:15 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	WTB green seatbelt buckle end I'm needing to put a center lap belt into my truck. Need just the end of the green seatbelt. The latch and such. Seatbelt can be trashed out or cut off. No retractor needed. We're going to be replacing the belt itself with new green seatbelt webbing. __________________ I'm on the Instagram- @Gearhead_Kevin

07-28-2004, 09:19 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Per She Ate you Looking..... __________________ I'm on the Instagram- @Gearhead_Kevin

07-28-2004, 10:11 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,160	May be able to help. Will check tomorrow after work, parting out a ' 71 that has original green belts. Still in the cab, not a complete set so may have the part you need. Not sure of the condition, do you have a color code from the glove box door or from the belt itself? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-30-2004, 04:43 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Take this rascal back to the tippy top. My little girl needs a seat belt so her car seat will quit sliding into the floor every time I hit the brakes. * I'm kidding of course, I have her car seat tied in place with old shoe laces and electrical wire* __________________ I'm on the Instagram- @Gearhead_Kevin

07-30-2004, 04:53 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Yes, mine are light green. Pretty much exact color of dash and steering wheel in above picture. Remember, I don't care about the belt webbing itself, just the buckle and part that clicks into the buckle. I'll be re-webbing them all to match with new webbing. Just take a knife and slice the ends off. Don't worry about unbolting the whole thing. I'd go say 10ish bucks for this stuff, plus shipping of course. __________________ I'm on the Instagram- @Gearhead_Kevin

07-28-2004, 10:15 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I'll look at the code tomorrow and get back to you. Thanks, Kevin __________________ I'm on the Instagram- @Gearhead_Kevin

07-30-2004, 04:50 PM	#6
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	TX I saw some today in a sub. are yours the lighter green color, these are in good shape except they are faded. Let me know, Harold

07-30-2004, 06:36 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,160	Tx, Went and looked at the belts in the parts truck and found: #4K71 Robbins #9300 printed on the tag. Appears to be same green as in your pic. Have one buckled end minus the plastic cover, webbing good but needs cleaning. Have the passenger side Inner belt with good buckle, cover and GM sticker intact with very minor scuffing on cover, and also outer belt complete with stiffner which has some black paint on it which cleans off easily. Would do $10 plus shipping for all, if interested let me know. Thanks, Ironhorse __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-30-2004, 06:45 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Is it this color? If so, I'm in like Flynn. __________________ I'm on the Instagram- @Gearhead_Kevin

07-30-2004, 06:49 PM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,160	Tx, That's the one I have. Do you want all the parts/ belts I have or just the buckled portion? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-30-2004, 06:55 PM	#11
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Send me the buckle part and two of the end eye parts that bolt to the floor. That way, with new webbing, I'll have a complete lap belt. Shipping is to 76086. Cash, money order, Paypal? __________________ I'm on the Instagram- @Gearhead_Kevin

07-30-2004, 07:11 PM	#12
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,160	Tx, Can do. Will get a shipping cost and send you a PM. Money Order works for me. Regards, Ironhorse __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.