70' SWB 4x4 Truck Project FORSALE REPOST - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PrimeredThunder · 08-15-2004, 04:23 PM

Repost, I really need to get rid of this setup...considering trades for a 60-66 C-10 or a 67-72 2wd truck!

I'm selling a 1970 4x4 SWB truck project that I purchased about a month ago. It is an almost complete truck minus the Bed. It has 72' Front End w/ Warn Hubs and Disc Brakes, also a 72' Rear End. Everything has 3.70 gears(I also belive it is a POSI rearend). It is rolling on 4 BFG 31" All-terrain Tires and Rallye Wheels, there is also a full size matching Spare with rallye Wheel(Tires are near new with only a couple thousand miles on them). The Suspension is stock. Comes with a Stock 350 Engine, TH350 Trans and 205 Transfer case. Cab has new Rockers and Floors on both sides, but still will need a lot of work. It has lots of parts, all front sheetmetal. Truck is basically complete minus the Bed. However, everything does still need to be finished, but the frame is done. I have more parts and pieces to go with this truck than I can remember to write here. Email me with specific questions. This is a really good setup, I planned to do a body swap, but my time to get it done this winter somewhat fell apart. Check out the pics, most everything I have is shown. Mind you that all of the work done on the truck was not done by myself, but the Previous Owner. I just brought everything home and had a change of plans. Everything is stored inside our shop now as well.

My asking price only what I have into the project, $2500. Located in Salem, Oregon and must be picked up.

Thanks,

Kenny

maxximus_thunder@yahoomail.com

**PICKMUP** · 08-15-2004, 06:52 PM

How do we check out the pics?

PrimeredThunder · 08-15-2004, 07:51 PM

Sorry, forgot to add them! Here are the pics of everything i have...

PrimeredThunder · 08-18-2004, 04:31 PM

^^^^^TTT...Anyone? Bueller?^^^^^

Nick's683/4 · 08-19-2004, 01:01 AM

Dose the cab have any rust in it? And would you want to sell just the rolling frame and cab?

thanks Nick

PrimeredThunder · 08-20-2004, 01:44 AM

The cab doesn't have any cancer or rot, most of that was fixed by the Previous Owner, there is some surface rust but nothing that cant be stopped. However, there is some more welding and other metal work required to get it finished.
I'll sell the Rolling Chassis, Cab, Engine, Transmission and Transfer case for $2,000

Kenny
maxximus_thunder@yahoomail.com

*FormerMember* · 08-20-2004, 09:01 AM

I have a 70 GMC 2wd or a 70 Chevy 2wd I'd trade you.

vtblazer · 08-20-2004, 11:38 AM

Way out west...

Nice project, good luck.

PrimeredThunder · 08-20-2004, 12:48 PM

Quote:

Originally Posted by grendel

I have a 70 GMC 2wd or a 70 Chevy 2wd I'd trade you.

Grendel...You've got me intrested....I'll PM you

PrimeredThunder · 08-21-2004, 01:52 AM

^^^It's gotta go, I need the room in the shop!^^^

PrimeredThunder · 08-22-2004, 08:13 PM

^^^^^Bump^^^^^

08-15-2004, 04:23 PM	#1
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	70' SWB 4x4 Truck Project FORSALE REPOST Repost, I really need to get rid of this setup...considering trades for a 60-66 C-10 or a 67-72 2wd truck! I'm selling a 1970 4x4 SWB truck project that I purchased about a month ago. It is an almost complete truck minus the Bed. It has 72' Front End w/ Warn Hubs and Disc Brakes, also a 72' Rear End. Everything has 3.70 gears(I also belive it is a POSI rearend). It is rolling on 4 BFG 31" All-terrain Tires and Rallye Wheels, there is also a full size matching Spare with rallye Wheel(Tires are near new with only a couple thousand miles on them). The Suspension is stock. Comes with a Stock 350 Engine, TH350 Trans and 205 Transfer case. Cab has new Rockers and Floors on both sides, but still will need a lot of work. It has lots of parts, all front sheetmetal. Truck is basically complete minus the Bed. However, everything does still need to be finished, but the frame is done. I have more parts and pieces to go with this truck than I can remember to write here. Email me with specific questions. This is a really good setup, I planned to do a body swap, but my time to get it done this winter somewhat fell apart. Check out the pics, most everything I have is shown. Mind you that all of the work done on the truck was not done by myself, but the Previous Owner. I just brought everything home and had a change of plans. Everything is stored inside our shop now as well. My asking price only what I have into the project, $2500. Located in Salem, Oregon and must be picked up. Thanks, Kenny maxximus_thunder@yahoomail.com __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

08-15-2004, 06:52 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	How do we check out the pics? __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-15-2004, 07:51 PM	#3
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Sorry, forgot to add them! Here are the pics of everything i have... Attached Images __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

08-18-2004, 04:31 PM	#4
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	^^^^^TTT...Anyone? Bueller?^^^^^ __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

08-19-2004, 01:01 AM	#5
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Dose the cab have any rust in it? And would you want to sell just the rolling frame and cab? thanks Nick __________________ 70 1 ton with a 454 and a 4 speed and a np205

08-20-2004, 01:44 AM	#6
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	The cab doesn't have any cancer or rot, most of that was fixed by the Previous Owner, there is some surface rust but nothing that cant be stopped. However, there is some more welding and other metal work required to get it finished. I'll sell the Rolling Chassis, Cab, Engine, Transmission and Transfer case for $2,000 Kenny maxximus_thunder@yahoomail.com __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

08-20-2004, 09:01 AM	#7
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	I have a 70 GMC 2wd or a 70 Chevy 2wd I'd trade you.

08-20-2004, 11:38 AM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Way out west... Nice project, good luck.

08-21-2004, 01:52 AM	#10
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	^^^It's gotta go, I need the room in the shop!^^^ __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

08-22-2004, 08:13 PM	#11
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	^^^^^Bump^^^^^ __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.