F/S or Trade-72 Custom10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 08-18-2004, 03:11 PM

I bought this for a parts truck earlier this year with the intent of robbing the discs off of it and using the rear end. Well, all I got acomplished was 'borrowing' the brake booster before loosing interest. I am in the process of moving and simply don't have time to get started. A brief history: it had a 350/3-speed combo in it, then the previous owner put a TH350 behind the engine. Later he pulled both and sold me the body as a parts truck. I was planning on using my leftover parts to make it a work truck (of sorts), so the extra parts are a 250 inline with a 3-speed saginaw (running when pulled last month), replacement tranny crossmember, radiator, clutch linkage, column shift linkage, ralley wheels, and some other smaller stuff that I am forgetting. The bed floor needs work. I can walk around on it, but it is full of rusty spots and holes, as seen in some of the later pictures. The PO put floor shifters in for both the manual tranny, and then the auto, so both holes are still there, but could most likely be welded in with a patch. I would let her go for around $300 or best offer....or would trade:

1) Driver's stepside fender with NO spare tire cutout, but with the marker light hole + $100

or

2) Chevy Small Block

or

3) Automatic tranny (GM of course)

Everything is subject to wheelin' & dealin', so if you want, make me an offer. Ask anything you want. I will tell you what I know.

Putter · 08-18-2004, 03:12 PM

more pics

Putter · 08-18-2004, 03:13 PM

....more....

Putter · 08-18-2004, 03:15 PM

...even more...

*1972C10* · 08-18-2004, 05:30 PM

If you was closer id trade for a small block.

LUV2XCLR8 · 08-18-2004, 05:37 PM

Should Sell, Bedsides Look Like They Are Worth That Much, Imo

R 78 PROJECT · 08-18-2004, 06:28 PM

Texas you said great place and on the way stop by and I'll take that truck off your hands and you take $300 out of mine.,deal? just kidding wish as usuall you were closer thanks Lewis

CHEVYE · 08-18-2004, 06:45 PM

pm`d ya. can`t tell if it is a swb or long? does it have a title at all?

Hutch · 08-18-2004, 08:45 PM

CHEVYE

Quote:

can`t tell if it is a swb or long?

I am pretty sure it is a short Fleet bed.
Onthe pic that shows the bedside it only has two stake pockets the longbed would have had three of these.

zooza · 08-18-2004, 10:28 PM

I've got a small block I'll trade ya' Its a 305 and it runs good . I'm close to nashville if you are interested in a swap?

Putter · 08-19-2004, 09:31 AM

Oh, I guess I didn't get all the details in there. It is a short bed (good eye Hutch), and yes, I do have a clear title in my glovebox that matches the plate in the door jam. Zooza, I will have to look and see where Linden, TN is?! I am just trying to get away from this inline 6.

smonty · 08-19-2004, 12:50 PM

Hello Mr. Putter,

I will buy it for $300.00 or if you want a good driver's stepside fender w/o cutout I will trade you one + $100.00. Ether way. I can pick it up over the labor day weekend.

Ernie

Putter · 08-19-2004, 03:26 PM

Ernie,
(Tell Burt I said 'Hey') J/K....I got your PM, and returned one to you. That sounds good to me. Truck rolls around by just pushing, so you could actually tow it with a car dollie, but I'd go with a full trailer. Labor Day? That is less than a month away....remember, don't wear white after Labor Day...fashion fauxpax (Fo-Pa).

08-18-2004, 03:11 PM	#1
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	F/S or Trade-72 Custom10-CHEAP I bought this for a parts truck earlier this year with the intent of robbing the discs off of it and using the rear end. Well, all I got acomplished was 'borrowing' the brake booster before loosing interest. I am in the process of moving and simply don't have time to get started. A brief history: it had a 350/3-speed combo in it, then the previous owner put a TH350 behind the engine. Later he pulled both and sold me the body as a parts truck. I was planning on using my leftover parts to make it a work truck (of sorts), so the extra parts are a 250 inline with a 3-speed saginaw (running when pulled last month), replacement tranny crossmember, radiator, clutch linkage, column shift linkage, ralley wheels, and some other smaller stuff that I am forgetting. The bed floor needs work. I can walk around on it, but it is full of rusty spots and holes, as seen in some of the later pictures. The PO put floor shifters in for both the manual tranny, and then the auto, so both holes are still there, but could most likely be welded in with a patch. I would let her go for around $300 or best offer....or would trade: 1) Driver's stepside fender with NO spare tire cutout, but with the marker light hole + $100 or 2) Chevy Small Block or 3) Automatic tranny (GM of course) Everything is subject to wheelin' & dealin', so if you want, make me an offer. Ask anything you want. I will tell you what I know. Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 08-18-2004 at 03:46 PM.

08-18-2004, 03:12 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	more pics Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-18-2004, 03:13 PM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	....more.... Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-18-2004, 03:15 PM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	...even more... Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-18-2004, 05:37 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,478	Should Sell, Bedsides Look Like They Are Worth That Much, Imo __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-18-2004, 05:30 PM	#5
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	If you was closer id trade for a small block.

08-18-2004, 06:28 PM	#7
R 78 PROJECT <<< R 67 PROJECT Join Date: Aug 2004 Location: FortWorth Tx. Posts: 767	Moving Too...... Texas you said great place and on the way stop by and I'll take that truck off your hands and you take $300 out of mine.,deal? just kidding wish as usuall you were closer thanks Lewis __________________ NEW BABY!!! '67 STEPSIDE FRAME OFF PROJECT bullstowin40@sbcglobal.net -92 2wd burb 225k dailey driver -98 nissan quest the wifes -67 C-10 stepside my toy

08-18-2004, 06:45 PM	#8
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	pm`d ya. can`t tell if it is a swb or long? does it have a title at all? __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

08-18-2004, 10:28 PM	#10
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	I've got a small block I'll trade ya' Its a 305 and it runs good . I'm close to nashville if you are interested in a swap?

08-19-2004, 09:31 AM	#11
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Oh, I guess I didn't get all the details in there. It is a short bed (good eye Hutch), and yes, I do have a clear title in my glovebox that matches the plate in the door jam. Zooza, I will have to look and see where Linden, TN is?! I am just trying to get away from this inline 6. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-19-2004, 12:50 PM	#12
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply Hello Mr. Putter, I will buy it for $300.00 or if you want a good driver's stepside fender w/o cutout I will trade you one + $100.00. Ether way. I can pick it up over the labor day weekend. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

08-19-2004, 03:26 PM	#13
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Ernie, (Tell Burt I said 'Hey') J/K....I got your PM, and returned one to you. That sounds good to me. Truck rolls around by just pushing, so you could actually tow it with a car dollie, but I'd go with a full trailer. Labor Day? That is less than a month away....remember, don't wear white after Labor Day...fashion fauxpax (Fo-Pa). __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.