Stuff for sale from the '78. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bluex · 08-21-2004, 07:18 AM

Stock air cleaner, worked great took it off looong ago for a chrome one. $30 + ride.

.040 over silv-o-lite pistons part number: 8-1436 also included a set of rods I will send (9) b/c one maybe bad where I lost the exhaust vavle on that cylinder. I was going to use them with my rebuild but had to go .060. $150 + ride.

TH-350, somewhere around 50k on it. No problems went with a 700. Includes converter, dipstick, kickdown cable and vac mod line. $125 + ride.

8' bed '78 model. Needs the floor replaced, great bed for a daily as the rust is only in the floor. Includes repop tailgate, lights with harness, gas tank and filler neck. $75 you come and get it.

I have more but I cant remember it all, I will post more later. All stuff is up for best reasonable offer too.

Thanks
Paul

beaterC10 · 08-21-2004, 09:53 AM

Do you have a good fan shroud?

Blue_71 · 08-21-2004, 12:14 PM

what size engine are the pistons for? 350? what kind of rods? flat tops?

bluex · 08-22-2004, 12:45 AM

Quote:

Originally Posted by Blue_71

what size engine are the pistons for? 350? what kind of rods? flat tops?

Yes they are for a 350 as I was going to use them on mine. They are flat tops with four valve reliefs. I was thinking I put all that on there, but I guess I got ahead of myself. The rods are the stock ones out of the motor. It was a reman from NAPA that got around 40k on it when the keeper on the #4 exhaust valve broke and it and the piston had a very expensive talk. I can get pics of them if you would like.

beater--no shrouds, sorry.

Thanks
Paul

I would also be interesed in a swap on any of the stuff for a complete window channel seal set and on the cab weatherstriping.

bluex · 08-23-2004, 06:02 AM

ttt

The tranny is a 9" tailshaft, I have pics of it too.

bluex · 08-31-2004, 02:02 AM

BUMP, Make an offer on any of it, it HAS to go!!

benscool1 · 09-08-2004, 12:36 AM

any pics of the bed?

bluex · 09-08-2004, 03:02 PM

Yes, quite a few look here:

http://s91879901.onlinehome.us/gallery/Paulstruck

Most of that junk that was in there is now gone, it was kinda a storage for all the parts I was using during the swap.

rich-white · 09-11-2004, 11:04 AM

beater c 10 check your pm

08-21-2004, 07:18 AM	#1
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Stuff for sale from the '78. Stock air cleaner, worked great took it off looong ago for a chrome one. $30 + ride. .040 over silv-o-lite pistons part number: 8-1436 also included a set of rods I will send (9) b/c one maybe bad where I lost the exhaust vavle on that cylinder. I was going to use them with my rebuild but had to go .060. $150 + ride. TH-350, somewhere around 50k on it. No problems went with a 700. Includes converter, dipstick, kickdown cable and vac mod line. $125 + ride. 8' bed '78 model. Needs the floor replaced, great bed for a daily as the rust is only in the floor. Includes repop tailgate, lights with harness, gas tank and filler neck. $75 you come and get it. I have more but I cant remember it all, I will post more later. All stuff is up for best reasonable offer too. Thanks Paul __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

08-23-2004, 06:02 AM	#5
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	ttt The tranny is a 9" tailshaft, I have pics of it too. __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

08-31-2004, 02:02 AM	#6
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	BUMP, Make an offer on any of it, it HAS to go!! __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

09-08-2004, 12:36 AM	#7
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	any pics of the bed? __________________ Ben 84 C10 Silverado 14 Silverado Z71

09-08-2004, 03:02 PM	#8
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Yes, quite a few look here: http://s91879901.onlinehome.us/gallery/Paulstruck Most of that junk that was in there is now gone, it was kinda a storage for all the parts I was using during the swap. __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

08-21-2004, 09:53 AM	#2
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Do you have a good fan shroud?

09-11-2004, 11:04 AM	#9
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	beater c 10 check your pm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.