how long would it take??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 08-26-2004, 11:49 AM

when i sale my car soon, i'm gonna be buying some stuff for my truck to make it happy being my daily driver for a while. this includes:

new tires for my 17's
new 3" drop spindles
new 2" drop coils
lowering shackles
wc c-notch
poly front end kit

about how long should it take me to redo my front end??? a day or so???

Time Travel · 08-26-2004, 11:54 AM

it all depends on were you are getting your poly kit from. I ordered one from pst and some of the parts are on back order nad theywont get them until September the 15. I ordered the kit in July!!!!

79BIG10 · 08-26-2004, 12:24 PM

I would guess a good weekend. ALso you have to remember to get the front end aligned. When I get the parts for mine I'll ask off for a few days to have the time to clean everything up and have all the time I need.

TIMSPEED · 08-26-2004, 01:06 PM

Quote:

Originally Posted by ocbaud

when i sale my car soon, i'm gonna be buying some stuff for my truck to make it happy being my daily driver for a while. this includes:
new tires for my 17's
new 3" drop spindles
new 2" drop coils
lowering shackles
wc c-notch
poly front end kit
about how long should it take me to redo my front end??? a day or so???

I got first dibs on your 1.5" WC Springs!! I'd give yourself a weekend to do it all. Friday night, start getting your front end apart, and take your bed off. Then saturday, get the front end buttoned back up (Hope there's a shop open on saturdays to press the bushings in). Then sunday, get your Shackles & C-Notch put on, and the bed put back on. Then monday, go have it aligned.

bigblock73 · 08-26-2004, 03:02 PM

I agree with Tim (who'd a thunk?

)...give yourself a long weekend to be on the safe side. It is a pretty major task, and something is bound to go wrong and delay things.

Also...IT IS "SELL"!!!

AirMale · 08-26-2004, 04:34 PM

Stop "F"ing around and order the bags, plates and cups from jason at www.***************** should run ya about $225 to your door. Then just run a schrader valve and set it where you want. If you decide later that you want to bag the rear and add an air controller at least your half way home! Probably cheaper anyway.

ocbaud · 08-26-2004, 07:24 PM

i have to have new spindles anyway. there is a problem with one of mine

08-26-2004, 11:49 AM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	how long would it take??? when i sale my car soon, i'm gonna be buying some stuff for my truck to make it happy being my daily driver for a while. this includes: new tires for my 17's new 3" drop spindles new 2" drop coils lowering shackles wc c-notch poly front end kit about how long should it take me to redo my front end??? a day or so???

08-26-2004, 12:24 PM	#3
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	I would guess a good weekend. ALso you have to remember to get the front end aligned. When I get the parts for mine I'll ask off for a few days to have the time to clean everything up and have all the time I need. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

08-26-2004, 03:02 PM	#5
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	I agree with Tim (who'd a thunk? )...give yourself a long weekend to be on the safe side. It is a pretty major task, and something is bound to go wrong and delay things. Also...IT IS "SELL"!!! __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

08-26-2004, 04:34 PM	#6
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	Stop "F"ing around and order the bags, plates and cups from jason at www.***************** should run ya about $225 to your door. Then just run a schrader valve and set it where you want. If you decide later that you want to bag the rear and add an air controller at least your half way home! Probably cheaper anyway. __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

08-26-2004, 11:54 AM	#2
Time Travel Registered User Join Date: Jun 2004 Location: San Jose, California Posts: 56	it all depends on were you are getting your poly kit from. I ordered one from pst and some of the parts are on back order nad theywont get them until September the 15. I ordered the kit in July!!!!

08-26-2004, 07:24 PM	#7
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i have to have new spindles anyway. there is a problem with one of mine



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.