|
08-30-2004, 10:55 PM
|
#1 |
|
Senior Member
 
Join Date: Aug 2002
Location: omaha,Ne
Posts: 619
|
Which would be easier
Im looking at installing a 350 create motor from GMGoodwrench. Problem is im not to sure on the carb, intake and ingnition system to use. The old motor was a 350 sb 4 bbl. Im looking at adding a little more power then whats coming straight from the create motor. Also what would be easier to clean and look nicer. Polished, Satain or Chrome? This is a daily driver my 80 SB 4x4.
Thanks Jason |
|
|
|
08-31-2004, 07:02 PM
|
#2 |
|
Tonawanda 454
Join Date: Mar 2004
Location: Liquid Sunshine State
Posts: 2,755
|
carb: Edelbrock 600cfm or maybe 700cfm at most
intake: matched to carb, performer intake would be best for that carb everythign else is just a matter of preference
__________________
91 Chevy Suburban Tonawanda 454 R2500 - SOLD!!!  04 Dodge Durango 5.7L Hemi 2WD, 24K miles (as of July 2011) In the past 30 years about 90% of Fords are still on the road, the other 10% made it home. ------------------- |
|
|
|
|
08-31-2004, 07:29 PM
|
#3 |
|
Senior Member
Join Date: Aug 2002
Location: omaha,Ne
Posts: 619
|
I have decided to go with the Edelbrock 600cfm, performer intake ,water pump,fuel pump and a MSD pro-billet dis. Have them all on order and should have them by thursday.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
