another 700r4 question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968GMC · 08-31-2004, 11:30 AM

I have a chance to buy a 88or89 chev full size 1/2 ton truck. lt has a 4.3 V6 to a automatic. Question is, can it be a th350. If its a 4 speed, can it be a 200r4. I will only buy the truck if its a 700r4. Thanks for your help.

Tx Firefighter · 08-31-2004, 11:41 AM

Every single one of those trucks with an automatic and not a 454 SS that I've ever seen, had a 700r4. This applies to U.S. spec trucks. I once saw an imported Mexican full size that still had the Th350.

Look at the instrument cluster if it has PRNODLL with the overdrive spot, it will be a 700

I worked on them in the dealership for a good while.

grayw0lf · 08-31-2004, 03:21 PM

Look at the tranny oil pan down below. This is a pretty sure way to deternine what your getting.

1968GMC · 08-31-2004, 05:40 PM

where can l find a trans oil pan outline for all gm trans?

Deuce · 08-31-2004, 05:56 PM

http://www.nastyz28.com/transid.html
Hope this works for ya.

1968GMC · 08-31-2004, 06:38 PM

t-y deuce exacly what l was looking for.

Deuce · 08-31-2004, 06:56 PM

Don't ya just love this place!! Ask and ye shall recieve.

08-31-2004, 11:30 AM	#1
1968GMC love my truck Join Date: May 2001 Location: aylmer QC Posts: 648	another 700r4 question I have a chance to buy a 88or89 chev full size 1/2 ton truck. lt has a 4.3 V6 to a automatic. Question is, can it be a th350. If its a 4 speed, can it be a 200r4. I will only buy the truck if its a 700r4. Thanks for your help.

08-31-2004, 11:41 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Every single one of those trucks with an automatic and not a 454 SS that I've ever seen, had a 700r4. This applies to U.S. spec trucks. I once saw an imported Mexican full size that still had the Th350. Look at the instrument cluster if it has PRNODLL with the overdrive spot, it will be a 700 I worked on them in the dealership for a good while. __________________ I'm on the Instagram- @Gearhead_Kevin

08-31-2004, 03:21 PM	#3
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	Look at the tranny oil pan down below. This is a pretty sure way to deternine what your getting. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

08-31-2004, 05:56 PM	#5
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	http://www.nastyz28.com/transid.html Hope this works for ya. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

08-31-2004, 06:56 PM	#7
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Don't ya just love this place!! Ask and ye shall recieve. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

08-31-2004, 05:40 PM	#4
1968GMC love my truck Join Date: May 2001 Location: aylmer QC Posts: 648	where can l find a trans oil pan outline for all gm trans?

08-31-2004, 06:38 PM	#6
1968GMC love my truck Join Date: May 2001 Location: aylmer QC Posts: 648	t-y deuce exacly what l was looking for.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.