Lots of stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1BadSS · 09-04-2004, 06:07 PM

Have a bunch of stuff left over from my truck before I sold it, so its all of no good use to me. Have a brand new set of tail light bezels, the retaining clips and screws, Two screws that are new from American Classic (Not sure what for). A Brand new battery tray bottom. The lot can be had for $20 + ride. SOLD

Also have an Edelbrock Performer intake, and a 650cfm holley Double pumper carburetor (Spreadbore). SOLD

Have a B&M floor shifter, thats in decent working used shape. $25 + ride. SOLD

Have a new Spreadbore to Squarebore Adaptor plate (1" Spacer-ish), which also works Squarebore to spreadbore. $10 + ride.

Have a brand new hurst floor shifter that will work very good in a pickup. $20 + ride.

Have a Chevy HEI Dist, minus cap and rotor, but comes with coil for $40 + ride. That worked flawlessly in my 68 impala, its the one wire hookup kind!

Also have a single machine shop fresh 305 head $15 + ride.

Also have a set of Edelbrock Chrome Valve covers, in excellent shape! Only a couple months old!! $25 + ride. SOLD

And last but not least, a new set of Umbrella valve seals for chevy smallblock heads $10 + ride.

Everything can be had for $170 + ride, if interested!

ratrod67 · 09-04-2004, 07:31 PM

Got pics of the shifters, carb and intake?

**tnblazerk5** · 09-04-2004, 08:20 PM

what kind of hurst shifter is it (auto or stright shift)? got any pics of the stuff ?

zooza · 09-04-2004, 08:23 PM

Would you take 110 + shipping for all (EVERYTHING)but the head ( i dont need that). If you are interested in that amount shipping will be to 37096

67ChevyC10Stepside · 09-04-2004, 09:07 PM

im interested in carb intake and HEI.

ZOOMY · 09-04-2004, 09:51 PM

I'll take the carb & intake if it's till available. PM me......thanks.........Zoomy

1BadSS · 09-05-2004, 01:57 AM

Quote:

Originally Posted by ratrod67

Got pics of the shifters, carb and intake?

1BadSS · 09-05-2004, 01:57 AM

Quote:

Originally Posted by tnblazerk5

what kind of hurst shifter is it (auto or stright shift)? got any pics of the stuff ?

The hurst is a 2spd/3spd auto adjustable shifter.

RIDDLA · 09-05-2004, 03:17 AM

ill take the shifter to 87506 if shipping isnt to expensive if thats cool do you have pics of it?

1BadSS · 09-05-2004, 03:30 AM

Quote:

Originally Posted by RIDDLA

ill take the shifter to 87506 if shipping isnt to expensive if thats cool do you have pics of it?

the hurst or the b&m?

RIDDLA · 09-05-2004, 03:32 AM

the hurst if it works for a 350 tranny do you have pics of both?

1BadSS · 09-05-2004, 03:34 AM

The hurst should work for a th350, but it's an older one that uses rods that go to the tranny, rather than a cable like the B&M has.

RIDDLA · 09-05-2004, 03:38 AM

i see possibly the bm would be better right? i wanna put it in my truck

1BadSS · 09-05-2004, 03:44 AM

Quote:

Originally Posted by RIDDLA

i see possibly the bm would be better right? i wanna put it in my truck

Yes, the b&m would be a better application, because you could mount it anywhere. With the hurst you'd have to mount it specificly in one spot to give the rods enough tension to be able to move the lfork on the tranny. The b&m just works alot better on our trucks, I had it in my 69 c10.

RIDDLA · 09-05-2004, 03:45 AM

okay ill take the b&m do you have pics of it ?

1BadSS · 09-05-2004, 03:46 AM

let me go and take some... give me 5mins

1BadSS · 09-05-2004, 03:51 AM

I have the base off now, because I took it out of my truck and never reinstalled it.

RIDDLA · 09-05-2004, 03:54 AM

ill take it if shipping 87506 aint to high im on a budget lol alright thank you Marc

zooza · 09-05-2004, 08:40 AM

Am I blind or did the total buy it all price go from 150 last night to 170 today?

HEAVY CHEVY · 09-05-2004, 11:32 AM

Am interested in the valve covers and thr umbrella seats I am in North Carolina 28371

1BadSS · 09-05-2004, 01:57 PM

Quote:

Originally Posted by zooza

Am I blind or did the total buy it all price go from 150 last night to 170 today?

Added the valve covers in...

1BadSS · 09-05-2004, 01:58 PM

Quote:

Originally Posted by HEAVY CHEVY

Am interested in the valve covers and thr umbrella seats I am in North Carolina 28371

Total would be $55.

67ChevyC10Stepside · 09-05-2004, 02:52 PM

so can i buy the carb/intake or what?

1BadSS · 09-05-2004, 03:16 PM

Quote:

Originally Posted by 67ChevyC10Stepside

so can i buy the carb/intake or what?

Already been spoken for.

HEAVY CHEVY · 09-05-2004, 05:09 PM

I'll pass for now.

09-04-2004, 06:07 PM	#1
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Lots of stuff Have a bunch of stuff left over from my truck before I sold it, so its all of no good use to me. Have a brand new set of tail light bezels, the retaining clips and screws, Two screws that are new from American Classic (Not sure what for). A Brand new battery tray bottom. The lot can be had for $20 + ride. SOLD Also have an Edelbrock Performer intake, and a 650cfm holley Double pumper carburetor (Spreadbore). SOLD Have a B&M floor shifter, thats in decent working used shape. $25 + ride. SOLD Have a new Spreadbore to Squarebore Adaptor plate (1" Spacer-ish), which also works Squarebore to spreadbore. $10 + ride. Have a brand new hurst floor shifter that will work very good in a pickup. $20 + ride. Have a Chevy HEI Dist, minus cap and rotor, but comes with coil for $40 + ride. That worked flawlessly in my 68 impala, its the one wire hookup kind! Also have a single machine shop fresh 305 head $15 + ride. Also have a set of Edelbrock Chrome Valve covers, in excellent shape! Only a couple months old!! $25 + ride. SOLD And last but not least, a new set of Umbrella valve seals for chevy smallblock heads $10 + ride. Everything can be had for $170 + ride, if interested! __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art. Last edited by 1BadSS; 09-07-2004 at 06:01 PM.

09-04-2004, 09:07 PM	#5
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	im interested in carb intake and HEI. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

09-04-2004, 09:51 PM	#6
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	carb & intake I'll take the carb & intake if it's till available. PM me......thanks.........Zoomy

09-05-2004, 03:17 AM	#9
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	ill take the shifter to 87506 if shipping isnt to expensive if thats cool do you have pics of it? __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

09-05-2004, 03:32 AM	#11
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	the hurst if it works for a 350 tranny do you have pics of both? __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

09-04-2004, 07:31 PM	#2
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Got pics of the shifters, carb and intake?

09-04-2004, 08:20 PM	#3
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	what kind of hurst shifter is it (auto or stright shift)? got any pics of the stuff ?

09-04-2004, 08:23 PM	#4
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	Would you take 110 + shipping for all (EVERYTHING)but the head ( i dont need that). If you are interested in that amount shipping will be to 37096

09-05-2004, 03:34 AM	#12
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	The hurst should work for a th350, but it's an older one that uses rods that go to the tranny, rather than a cable like the B&M has. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

09-05-2004, 03:38 AM	#13
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	i see possibly the bm would be better right? i wanna put it in my truck __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

09-05-2004, 03:45 AM	#15
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	okay ill take the b&m do you have pics of it ? __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

09-05-2004, 03:46 AM	#16
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	let me go and take some... give me 5mins __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

09-05-2004, 03:51 AM	#17
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	I have the base off now, because I took it out of my truck and never reinstalled it. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

09-05-2004, 03:54 AM	#18
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	ill take it if shipping 87506 aint to high im on a budget lol alright thank you Marc __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

09-05-2004, 08:40 AM	#19
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	Am I blind or did the total buy it all price go from 150 last night to 170 today?



Register or Log In To remove these advertisements.

09-05-2004, 11:32 AM	#20
HEAVY CHEVY BOWTIE FOREVER Join Date: Mar 2002 Location: Sanford,N.C. 23770 Posts: 273	Am interested in the valve covers and thr umbrella seats I am in North Carolina 28371 __________________ 69 C-10 SHORT FLEET BED 350 4-BOLT/400 turbo upper & lower molding 65 IMPALA 2-DR 283/POWERGLIDE 66 IMPALA 2-DR hopefully 283/350 ~ CAMELTOE ROCKS ~

09-05-2004, 02:52 PM	#23
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	so can i buy the carb/intake or what? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

09-05-2004, 05:09 PM	#25
HEAVY CHEVY BOWTIE FOREVER Join Date: Mar 2002 Location: Sanford,N.C. 23770 Posts: 273	I'll pass for now. __________________ 69 C-10 SHORT FLEET BED 350 4-BOLT/400 turbo upper & lower molding 65 IMPALA 2-DR 283/POWERGLIDE 66 IMPALA 2-DR hopefully 283/350 ~ CAMELTOE ROCKS ~

Register or Log In To remove these advertisements.