58 Gmc Truck Parts Wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SWREDHEADF · 09-05-2004, 02:39 PM

Am I the only girl here???

Ok, I have a 58 GMC 1 Ton that I am restoring....I'm looking for some parts...parking light assembly, hood, side mirrors, crank, etc. If you have any parts, let me know.

Thanks!
Michelle

DennyB · 09-05-2004, 11:56 PM

Welcome to the board Michelle!
I'm Unable to help you with your parts quest.
To answer you other question, Yes ther are other girls here.
SLAMS 58 even has a 58!

rico_bob · 09-11-2004, 06:03 PM

write me: rico_bob@hotmail.com We have some GMC parts for sale

northerngmc · 09-29-2004, 03:01 PM

Front signal lights are very hard to come by and even more expensive when you find them.

Where are you?

I have a 59 GMC hood I would sell. For a picture go to http://photos.yahoo.com/bdumkee and click on 59 GMC, the third picture is my parts truck. It is located in Alberta Canada.

Side mirrors are reproduced. For a side mirror are you looking for a door mounted one that sits below the window or the 'peep' mirror that attaches to the top of the door? My parts truck has the 'peep' mirror, and I would sell it.

What do you mean by a crank? Engine crank, if so what engine?

I do have a GMC clock that is original that I would sell.

rico_bob · 09-29-2004, 04:45 PM

Brian, That is a nice truck! rico

*Slams_58* · 09-29-2004, 10:06 PM

Here I am!!! I'm a girl. A girl in desperate need of fender's for my 58!

Would you happen to have any NorthernGMC?

northerngmc · 09-30-2004, 10:29 AM

I have a front pair I bought out of Arizona a couple of years ago, and then I bought reproduction steel fenders. I can email you pictures if you want or maybe I will try and post them to my Yahoo page later today. $200 would buy the pair.

I really really liked my reproduction fenders, I bought them from Scott's in Penhold for $550 each.

northerngmc · 09-30-2004, 01:14 PM

Photos have been uploaded at my Yahoo site in my signature, click on Fenders.

They have since been sandblasted and the lower corners have rust and were bondo.

Warning do not buy parts from "usedpartsman" on eBay in Arizona! I paid about $550 for this pair of fenders to find out when they arrived that they weren't pure Arizona gold.

I went with reproduction fenders because I was paying a bodyman to fix the fenders and he estimated the cost would be close to the price of reproduction fenders by the time he had them fixed.

How tough is it to ship to Flin Flon?

rico_bob · 09-30-2004, 06:35 PM

Scotts in Canada is a Great Place also go here to see Canadian dealers of repro parts in your area of Knuck! http://www.goldenleafautomotive.com I am a Dynacorn dealer in the US (Dynacorn is the USA version of Goldenleaf)

northerngmc · 09-30-2004, 06:55 PM

Rico

What do you charge for reproduction fenders? Your eBay price is one of the cheapest.

rico_bob · 09-30-2004, 09:36 PM

Please visit the web site. Thank you. Web site is listed in profile. rico

DennyB · 10-28-2004, 06:11 PM

I think Michelle went into the witness protection program

09-05-2004, 02:39 PM	#1
SWREDHEADF Registered User Join Date: Sep 2004 Posts: 1	58 Gmc Truck Parts Wanted Am I the only girl here??? Ok, I have a 58 GMC 1 Ton that I am restoring....I'm looking for some parts...parking light assembly, hood, side mirrors, crank, etc. If you have any parts, let me know. Thanks! Michelle

09-05-2004, 11:56 PM	#2
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Welcome to the board Michelle! I'm Unable to help you with your parts quest. To answer you other question, Yes ther are other girls here. SLAMS 58 even has a 58! __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

09-11-2004, 06:03 PM	#3
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	write me: rico_bob@hotmail.com We have some GMC parts for sale __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

09-29-2004, 03:01 PM	#4
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Front signal lights are very hard to come by and even more expensive when you find them. Where are you? I have a 59 GMC hood I would sell. For a picture go to http://photos.yahoo.com/bdumkee and click on 59 GMC, the third picture is my parts truck. It is located in Alberta Canada. Side mirrors are reproduced. For a side mirror are you looking for a door mounted one that sits below the window or the 'peep' mirror that attaches to the top of the door? My parts truck has the 'peep' mirror, and I would sell it. What do you mean by a crank? Engine crank, if so what engine? I do have a GMC clock that is original that I would sell. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

09-29-2004, 04:45 PM	#5
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	Nice Truck! Brian, That is a nice truck! rico __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

09-29-2004, 10:06 PM	#6
Slams_58 Account Suspended Join Date: May 2002 Location: I let ya know as soon as I know Posts: 3,593	Here I am!!! I'm a girl. A girl in desperate need of fender's for my 58! Would you happen to have any NorthernGMC?

09-30-2004, 10:29 AM	#7
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	I have a front pair I bought out of Arizona a couple of years ago, and then I bought reproduction steel fenders. I can email you pictures if you want or maybe I will try and post them to my Yahoo page later today. $200 would buy the pair. I really really liked my reproduction fenders, I bought them from Scott's in Penhold for $550 each. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

09-30-2004, 01:14 PM	#8
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Photos have been uploaded at my Yahoo site in my signature, click on Fenders. They have since been sandblasted and the lower corners have rust and were bondo. Warning do not buy parts from "usedpartsman" on eBay in Arizona! I paid about $550 for this pair of fenders to find out when they arrived that they weren't pure Arizona gold. I went with reproduction fenders because I was paying a bodyman to fix the fenders and he estimated the cost would be close to the price of reproduction fenders by the time he had them fixed. How tough is it to ship to Flin Flon? __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

09-30-2004, 06:35 PM	#9
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	Scotts in Canada is a Great Place also go here to see Canadian dealers of repro parts in your area of Knuck! http://www.goldenleafautomotive.com I am a Dynacorn dealer in the US (Dynacorn is the USA version of Goldenleaf) __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

09-30-2004, 06:55 PM	#10
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Rico What do you charge for reproduction fenders? Your eBay price is one of the cheapest. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

09-30-2004, 09:36 PM	#11
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	Please visit the web site Please visit the web site. Thank you. Web site is listed in profile. rico __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

10-28-2004, 06:11 PM	#12
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	I think Michelle went into the witness protection program __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.