09-07-2004, 05:50 PM | #1 |
Senior Member
Join Date: Feb 2004
Location: White Hall, AR
Posts: 316
|
Exhaust preferences?
I know this subject has been talked about a lot, and I know that the answer to this question is somewhat subjective, but I'd like to know what exhaust systems you guys like to run and why.
I currently have a stock 350 in my 76 LWB with true dual exhaust, no cats, Cherrybomb glasspacks, and medium sized chrome tips turned out behind the rear wheels (stock location). It is somewhat loud, but the sound is not as deep and mellow as I think I want. I'm debating on whether or not to change over to Flowmaster 40 Series either Original or Deltaflows, but I'm just not sure whether it's worth it or not, or how much sound will be in the cab with me. I want to be able to hear it some, especially when I get on it, but I also want to be able to hear the radio. Any recommendations or other info would be appreciated. Thanks!!!! Mike |
09-07-2004, 05:56 PM | #2 |
Stepsides RULE
Join Date: Jul 2004
Location: Pineville, LA
Posts: 1,921
|
hmmm as you said this is very subjective, so i'll be subjective
I'm not a fan of glasspacks, as they sound too loud and, well, redneck ish, and this is coming from Jeff Foxworthy approved redneck. My cousin is giving me his Flowmaster mufflers off his car (cough mustang cough), and im going with headman headers and pipes, gonna elliminate cat (shhhh) and put those mufflers on. I plan on using stock exits, as this is simplest. thats my plan. Y or X pipe would be cool, but thats more $$$ i aint be havin.
__________________
1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord |
09-07-2004, 06:01 PM | #3 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
I put 2 chamber Flowmasters on my 73. With headers and 3" pipe, it was still somewhat loud, but nothing compared to the open headers. I would suggest 3 chamber Flowmasters, if you want to stick with the Flowmasters. I have Dynomax mufflers on my Blazer, and it is too quiet for my taste. They were on it when I bought it, so they will stay for now. They are quiet even when you get on it. I think anything would be a step up over the glasspacks, but that is just my opinion.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
09-07-2004, 06:03 PM | #4 | |
It followed me home?
Join Date: Mar 2003
Location: Yup
Posts: 5,751
|
Quote:
__________________
Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually |
|
09-07-2004, 06:14 PM | #5 |
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
Thrush Super Turbos are the way to go. Flowmasters arent all they're cracked up to be.
|
09-07-2004, 06:46 PM | #6 |
Registered User
Join Date: Nov 2003
Location: st. louis area
Posts: 1,551
|
Yep, I generally prefer Turbo type mufflers on street toys. Ive got 2.5" on my truck with a pair of Dynomax Super Turbos & Sanderson headers. I like it
__________________
75 GMC C-15 short/step factory 454, lowered |
09-07-2004, 09:09 PM | #7 |
Overworked and Underlaid
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
|
i have dynomax headers,2 1/2 inch pipes,turbo mufflers and currently no tail pipes.its not to loud but has a rumble when i get on it.my exhaust system isnt finished however as im going to add an h-pipe-cliffsta i only paid 35 dollars for mine with all the pipes and mounting hardware from summit-just some food for thought and i got some exhaust turndowns for now a friend was going to use on his car but he decided not to.i plan on getting tail pipes in the future.
__________________
I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP |
09-07-2004, 09:38 PM | #8 |
Senior Member
Join Date: Feb 2004
Location: White Hall, AR
Posts: 316
|
Thanks for all of the input guys. This will probably show my ignorance here, but what is a "turbo style" muffler and how does it differ from something like a flowmaster?
Mike |
09-07-2004, 10:04 PM | #9 |
Registered User
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
|
flowmaster has no packing material, just baffles
__________________
'96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer |
09-07-2004, 11:58 PM | #10 |
Registered User
Join Date: Sep 2003
Location: North Texas
Posts: 326
|
I am running dual 40 Series Delta Flow Flowmasters with 3.5" tips. Has a quiet, mellow sound at idle, and sounds good when you get on it. Pretty quiet at highway speeds also.
__________________
1987 Chevrolet Silverado 2005 Chevrolet Silverado |
09-08-2004, 12:09 AM | #11 |
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
magnaflow mufflers!! they rock
|
09-08-2004, 12:21 AM | #12 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
I'm going with a set of heddman headers (if the guy ever gets back to me about them) a homemade x-pipe, a set of aerochamber mufflers with stock exit pipes if I can fit them in with my blazer tank swap.
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
09-08-2004, 08:07 AM | #13 |
Registered User
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
|
i've got the summit brand headers, custom made 3ich true dual exhaust going into a 3 inch in and out flowmaster i got at a junk yard, and thats it no turn down or anything
__________________
'96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer |
09-08-2004, 02:51 PM | #14 |
Senior Member
Join Date: Feb 2004
Location: White Hall, AR
Posts: 316
|
Thanks for the input everyone. I had a pair of Flowmaster 40 Series Deltaflows installed earlier today, and they definitely sound much better than the glasspacks I had. They have a much deeper, more mellow sound.
Mike |
09-08-2004, 04:42 PM | #15 |
Stepsides RULE
Join Date: Jul 2004
Location: Pineville, LA
Posts: 1,921
|
its kinda odd how a y or x pipe improves air flow "supposedly" since your basically making the air travel a farther distance. Exhaud is the one item i am the most hype about eventually getting for my truck. it improves performance, increases MPG, and it sounds cool. I just wish i had $$$, but K Mart should be hiring me anyday now...
__________________
1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord |
09-08-2004, 09:28 PM | #16 |
Tonawanda 454
Join Date: Mar 2004
Location: Liquid Sunshine State
Posts: 2,754
|
i am kind of in the same boat as cliffsta, the main problem for me is money but i did get a estimate on a local guy who is very reputable for $225 + tax, true dual pipe setup but this is also with standard mufflers.. the quote at the professional place in town with flowmasters said almost $400 but thats with 3" from the exhaust amnifold back
edit: did i just type amnifold? i meant manifold
__________________
91 Chevy Suburban Tonawanda 454 R2500 - SOLD!!! 04 Dodge Durango 5.7L Hemi 2WD, 24K miles (as of July 2011) In the past 30 years about 90% of Fords are still on the road, the other 10% made it home. ------------------- |
09-09-2004, 08:16 AM | #17 |
Registered User
Join Date: Nov 2003
Location: st. louis area
Posts: 1,551
|
Screw, youd be better off with 2.5" anyway
__________________
75 GMC C-15 short/step factory 454, lowered |
09-09-2004, 09:19 AM | #18 |
Registered User
Join Date: Sep 2003
Location: COVINGTON GEORGIA
Posts: 477
|
headers and glasspacks
i like the sound of glasspacks. i had flowmaster 40's and they did have a deeper sound but it vibrated the interior of the truck. glasspacks have that old muscle car sound
__________________
79 chevy k20 350/350/205/D44/14bFF 4.56 gears rock LWB pimer black 01 S-10 ZR2 extended cab 4.3/4L60E/233 3.73 gear 31" DICK CEPEK CRUSHERS |
09-09-2004, 09:57 AM | #19 |
Tonawanda 454
Join Date: Mar 2004
Location: Liquid Sunshine State
Posts: 2,754
|
stepside, i know i have tired 350 as is so i dont see any need for anything bigger than 2 1/2
and i have been thinking of glasspacks too, around this area they tend to crackle a bit nicer due to the salt air and water helps break them down a bit although some trucks get too much of the redneck sound (such as duals on a v6 frod ranger)
__________________
91 Chevy Suburban Tonawanda 454 R2500 - SOLD!!! 04 Dodge Durango 5.7L Hemi 2WD, 24K miles (as of July 2011) In the past 30 years about 90% of Fords are still on the road, the other 10% made it home. ------------------- |
09-09-2004, 12:36 PM | #20 |
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
flowmasters are far from being "flow masters"... take a look inside one and explain to me how all those baffles increases flow over a good straight through design.. true i am running flowmasters, but i am working on a new setup, from the headers back. i will also be going with 2.5" pipes instead of 3" like i have now.. i couldnt pass up the deal i got on the 3" duals and flowmasters... they have served me well but its time for a change...i may put the old exhaust up forsale on here if anyone wants it.....
|
09-09-2004, 04:36 PM | #21 |
Stepsides RULE
Join Date: Jul 2004
Location: Pineville, LA
Posts: 1,921
|
this dude "cough coon cough cough" said "I'll cherry bomb your truck for you man, it would be cool"
I stood there, then jumped in ol red and drove far far away.
__________________
1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord |
Bookmarks |
|
|