New Bucket Seat Options? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 09-08-2004, 05:33 PM

There was an article in Classic Trucks a few months back about all the newer model trucks that had buckets that would fit in our trucks. My subscription to Classic Trucks started after that article and I can't find it on their website. Does anybody know where to find it or that can give me a list of the vehicles that were mentioned in the article.

Thanks

Tei · 09-08-2004, 05:52 PM

I don't remember the article but here is a link to a post from another site http://67-72chevytrucks.com/techtips/other/other_1.html

I have a 40/60 benchseat from a similar year 90's truck that fit well... several holes worked, others had to be drilled.

5150 · 09-08-2004, 06:17 PM

I'm looking for some 99-up Chevy Truck or Tahoe/Yukon 96-01's that will fit. I prefer the newer chevy's because they have the seatbelts already in the seats. I remember there being some F150'S and some Dodge trucks that would work also. I just need the details of the years and models

Thanks

mr402 · 09-08-2004, 10:47 PM

I just happened to have that article bookmarked as I am currently looking to replace my seat as well. It was in the August issue of Classic Trucks on page 80. It did say the Ford seats would need some work to adapt the mounts as the front holes are at an angle, no integrated seat belts. 94 - 01 Dodge had integrated seatbelts but woudl require some modification of round the hump. I would guess that if your running a tall hump (big block or 4spd) truck that this could be a big problem.

Would really like to find a nice 40-20-40 for a 99Chevy/GMC up with the integrated seatbelts. Haven't found much locally yet.

hotrodtroy · 09-08-2004, 11:42 PM

I am looking at the mid 90's f150 seat (buckets with a fold down console), one of the trucks at work has this seat and i find it to be very comfy. The only mod needed is the front mount needs to be reworked. Others that fit very well are any of the late 80's seats. Good luck on your mission.

67_SS396 · 09-09-2004, 12:20 AM

I haven't seen the article, but I installed a set from a '00 Silverado a couple months ago. It was a huge improvment and makes the ride so much nicer.

99-2door · 09-09-2004, 12:22 AM

I have 3 sets of 99-02 40/20/40 seats from Chevy/GMC All LS/SLE style (read, the good ones)
2 sets of charcoal gray (dark)
1 set of pewter (light gray)
PM if you want more info.

mr402 · 09-10-2004, 10:13 PM

99-2door Sent you a PM.

**lock** · 09-10-2004, 11:47 PM

I have some 02 Silverado seats like 67_SS has. I went after them mainly for the integrated seat belts. Solves 2 problems in one purchase... nice comfy seats and the saftey of nice seat belts.

vtblazer · 09-11-2004, 05:10 AM

99-2door, sent you a pm also.

I pulled the seats out of my '02 chevy and installed them in my 70 swb just to check the fit. Not bad and like posted above the ride was way more comfortable too.

Blue Beard · 09-11-2004, 09:42 AM

Wish I could find some black seats like those...

norville · 09-11-2004, 10:11 AM

How about buckets from a s10 or the likes???

ya think they'll fit?

norv

vtblazer · 09-15-2004, 06:46 AM

Hey 99-2door, sent ya a pm a while back...ever get it?
I'd like to buy one of the gray seats (whole set)
I'll send you another pm...
I'm in Oklahoma on the morning of the 17th (fri) I have room on the truck for your seats.

Let me know, please.

cdowns · 09-15-2004, 08:00 AM

i've got these for sale if anybody can pick them up in daytona for $500

Billy Porter · 09-15-2004, 09:10 AM

try a dodge van........ leather ones are sweet,,,,,,,, need to work on the height though

WRMZ71 · 09-15-2004, 07:41 PM

I got my hands on a set of those 40/20/40 seats out of a wrecked 02 chevy for FREE!!!!! WOOOOooo HOooooo. How much fanagaling does it take to get them in there people who have done it? I thought i heard somebody say they might bolt right in

vtblazer · 09-17-2004, 05:13 PM

I'll be in Oklahoma this Sunday, sell me some seats.

I sent you another pm.
I'll be at Luv2xclr8's place sat, send him a pm please.
I'm going right by you and will pick them up.

LUV2XCLR8 · 09-17-2004, 05:35 PM

99-2door, Just Pm Me, Or Respond 2 This Thread, Kurt Will Be Here Sat.

weasel29gm · 09-17-2004, 10:17 PM

I used a Ford bench in mine,the passenger side front mount layed good on the roll in the floor. The driver side I made a bracket to fit between the mount and floor. Worked and fit great.

moneyguru · 09-19-2004, 01:41 PM

Anybody else have pics of their seats?

I have a 67 GMC with the original gas tank that I am putting back together.
I am trying to decide if I should use the recovered original bench seat (black) or go
with blakc seats from a newer truck?

Any pics would be greatl appreciated!

Thanks
Chris

mirks68stepside · 09-19-2004, 09:36 PM

I have that issue.

99-up Silverado 40/20/40
96-00 Suburban and Tahoe
94-01 Dodge 40/20/40
That is some of them. If you want I can copy the pages and send them to you?

09-08-2004, 05:33 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	New Bucket Seat Options? There was an article in Classic Trucks a few months back about all the newer model trucks that had buckets that would fit in our trucks. My subscription to Classic Trucks started after that article and I can't find it on their website. Does anybody know where to find it or that can give me a list of the vehicles that were mentioned in the article. Thanks __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-08-2004, 06:17 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	I'm looking for some 99-up Chevy Truck or Tahoe/Yukon 96-01's that will fit. I prefer the newer chevy's because they have the seatbelts already in the seats. I remember there being some F150'S and some Dodge trucks that would work also. I just need the details of the years and models Thanks __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-08-2004, 11:42 PM	#5
hotrodtroy Registered User Join Date: Feb 2004 Location: Colorado Springs, CO Posts: 138	I am looking at the mid 90's f150 seat (buckets with a fold down console), one of the trucks at work has this seat and i find it to be very comfy. The only mod needed is the front mount needs to be reworked. Others that fit very well are any of the late 80's seats. Good luck on your mission. __________________ '72 C-10 w/ '68 Large Journal 327cu.in. "It's o.k. to dream about what you want to do, until you start doing what you are meant to do." Line from "The Rookie"

09-09-2004, 12:20 AM	#6
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	I haven't seen the article, but I installed a set from a '00 Silverado a couple months ago. It was a huge improvment and makes the ride so much nicer. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-09-2004, 12:22 AM	#7
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	I have 3 sets of 99-02 40/20/40 seats from Chevy/GMC All LS/SLE style (read, the good ones) 2 sets of charcoal gray (dark) 1 set of pewter (light gray) PM if you want more info. __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

09-08-2004, 05:52 PM	#2
Tei Registered User Join Date: Sep 2004 Location: San Luis Obispo, CA Posts: 4	I don't remember the article but here is a link to a post from another site http://67-72chevytrucks.com/techtips/other/other_1.html I have a 40/60 benchseat from a similar year 90's truck that fit well... several holes worked, others had to be drilled.

09-08-2004, 10:47 PM	#4
mr402 Registered User Join Date: Jan 2004 Location: Elmira, Oregon Posts: 449	I just happened to have that article bookmarked as I am currently looking to replace my seat as well. It was in the August issue of Classic Trucks on page 80. It did say the Ford seats would need some work to adapt the mounts as the front holes are at an angle, no integrated seat belts. 94 - 01 Dodge had integrated seatbelts but woudl require some modification of round the hump. I would guess that if your running a tall hump (big block or 4spd) truck that this could be a big problem. Would really like to find a nice 40-20-40 for a 99Chevy/GMC up with the integrated seatbelts. Haven't found much locally yet.

09-10-2004, 10:13 PM	#8
mr402 Registered User Join Date: Jan 2004 Location: Elmira, Oregon Posts: 449	99-2door Sent you a PM.

09-10-2004, 11:47 PM	#9
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	I have some 02 Silverado seats like 67_SS has. I went after them mainly for the integrated seat belts. Solves 2 problems in one purchase... nice comfy seats and the saftey of nice seat belts. __________________ ------------ - Mark -My Build Thread... -68 C10, LT1 - Undergoing Frame off resto -86 IROC-Z T72 turbo 355, M6 -70 Camaro http://www.iroc-ss.com

09-11-2004, 05:10 AM	#10
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Seats 99-2door, sent you a pm also. I pulled the seats out of my '02 chevy and installed them in my 70 swb just to check the fit. Not bad and like posted above the ride was way more comfortable too. Attached Images

09-11-2004, 09:42 AM	#11
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Wish I could find some black seats like those... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

09-11-2004, 10:11 AM	#12
norville Senior Member Join Date: Jun 2004 Location: Mountain Top, Pa Posts: 323	How about buckets from a s10 or the likes??? ya think they'll fit? norv __________________ 1986 C10 Scottsdale 5.3, TH400

09-15-2004, 06:46 AM	#13
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Seats Hey 99-2door, sent ya a pm a while back...ever get it? I'd like to buy one of the gray seats (whole set) I'll send you another pm... I'm in Oklahoma on the morning of the 17th (fri) I have room on the truck for your seats. Let me know, please. Last edited by vtblazer; 09-15-2004 at 06:52 AM.

09-15-2004, 08:00 AM	#14
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i've got these for sale if anybody can pick them up in daytona for $500 __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 09-17-2004 at 10:24 PM.

09-15-2004, 09:10 AM	#15
Billy Porter Registered User Join Date: Jan 2000 Location: Petersburg, Virginia Posts: 178	try a dodge van........ leather ones are sweet,,,,,,,, need to work on the height though __________________ 71 GMC Stepside 250/350 Turbo better known as "Fred Sanford 77 240 Mercedes Benz 92 300E Mercedes Benz 70 Firebird 400 85 600 Ninja



Register or Log In To remove these advertisements.

09-15-2004, 07:41 PM	#16
WRMZ71 Cause the Chicks DIG IT!! Join Date: Nov 2003 Location: Beaufort SC Posts: 509	I got my hands on a set of those 40/20/40 seats out of a wrecked 02 chevy for FREE!!!!! WOOOOooo HOooooo. How much fanagaling does it take to get them in there people who have done it? I thought i heard somebody say they might bolt right in

09-17-2004, 05:13 PM	#17
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	HELLO 99-2door I'll be in Oklahoma this Sunday, sell me some seats. I sent you another pm. I'll be at Luv2xclr8's place sat, send him a pm please. I'm going right by you and will pick them up.

09-17-2004, 05:35 PM	#18
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	99-2door, Just Pm Me, Or Respond 2 This Thread, Kurt Will Be Here Sat. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-17-2004, 10:17 PM	#19
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	I used a Ford bench in mine,the passenger side front mount layed good on the roll in the floor. The driver side I made a bracket to fit between the mount and floor. Worked and fit great. __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

09-19-2004, 01:41 PM	#20
moneyguru Registered User Join Date: Oct 2002 Location: kalamazoo, mi Posts: 397	Anybody else have pics of their seats? I have a 67 GMC with the original gas tank that I am putting back together. I am trying to decide if I should use the recovered original bench seat (black) or go with blakc seats from a newer truck? Any pics would be greatl appreciated! Thanks Chris __________________ "Do the things you fear to do and the death of fear is certain"

09-19-2004, 09:36 PM	#21
mirks68stepside Registered User Join Date: Aug 2004 Location: Twinsburg,OHio Posts: 48	I have that issue. 99-up Silverado 40/20/40 96-00 Suburban and Tahoe 94-01 Dodge 40/20/40 That is some of them. If you want I can copy the pages and send them to you?

Register or Log In To remove these advertisements.