Don't make me pull my gun out........ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tennman · 09-09-2004, 09:24 AM

...........and rob these things from your truck !

Took the rear axles out of the old rearend (talking about my truck here ) yesterday and found out that i need the emergency brake lever that hooks to the brake pad .So not only am i needing those parts i'm still needing the rear cables and the rear cable slack holders for a 71-72, 3/4 ton , 4x4 with a four speed tranny if that makes a differance . Someone told me that it made a differance , i'm not sure ?!?! So , any you guys have these things , please help a brother out here ! *on my knees here , begging* I pay cash too !!!

I might be interested in a good or new 4 barrel carb ,for a 454bb, if you have one ?!?!

Also in need of a flywheel dustcover for a bigblock engine with a four speed tranny.

Thanks

jose · 09-09-2004, 11:12 AM

I might be able to help you out don't know but maybe on the brake lever . Do you if the 1/2 ton lever will work on the 3/4 ton ? if so i got one and its yours for the ride . Jose

Tennman · 09-09-2004, 11:20 AM

Not forsure if the 1/2 and the 3/4 ton brake levers are the same or not ?!?! Problably not,if i was a betting man ! Thanks Jose just the same.

stelth2002 · 09-09-2004, 12:20 PM

Sent you a message on the carb... .i also have several quads that ran, but need seals and what not if you want one of them.

meathead95 · 09-09-2004, 03:17 PM

thought you where going sbc this time? i have a 454 with a quadrajet on it i dont think im gonna use.

Tennman · 09-09-2004, 04:25 PM

Sent you a PM meat ! Thanks !

**JIMs70GMC** · 09-09-2004, 06:55 PM

Danny, Which rear end do you have? Sounds like the eaton if you had to remove the axles to look at the brakes. I seen somebody parting a 67 3/4 ton w/ eaton rear that might still have those parts:
http://67-72chevytrucks.com/vboard/s....php3?t=118522

Dean · 09-10-2004, 06:50 AM

How wide are your brake drums/shoes? I might have what you need.

Tennman · 09-10-2004, 09:19 AM

Thanks Jim for the link,and Meat and Dean i sent ya'll a pm ! Call me at 931-473-5401 if ya'll like .

09-09-2004, 09:24 AM	#1
Tennman 71 Chevy 4x4 Join Date: Jan 2000 Location: McMinnville,Tn. USA Posts: 450	Don't make me pull my gun out........ ...........and rob these things from your truck ! Took the rear axles out of the old rearend (talking about my truck here ) yesterday and found out that i need the emergency brake lever that hooks to the brake pad .So not only am i needing those parts i'm still needing the rear cables and the rear cable slack holders for a 71-72, 3/4 ton , 4x4 with a four speed tranny if that makes a differance . Someone told me that it made a differance , i'm not sure ?!?! So , any you guys have these things , please help a brother out here ! on my knees here , begging I pay cash too !!! I might be interested in a good or new 4 barrel carb ,for a 454bb, if you have one ?!?! Also in need of a flywheel dustcover for a bigblock engine with a four speed tranny. Thanks __________________ Tenn.man(a.k.a.Danny Cummings) Last edited by Tennman; 09-09-2004 at 12:28 PM.

09-09-2004, 11:12 AM	#2
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	I might be able to help you out don't know but maybe on the brake lever . Do you if the 1/2 ton lever will work on the 3/4 ton ? if so i got one and its yours for the ride . Jose __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

09-09-2004, 11:20 AM	#3
Tennman 71 Chevy 4x4 Join Date: Jan 2000 Location: McMinnville,Tn. USA Posts: 450	Not forsure if the 1/2 and the 3/4 ton brake levers are the same or not ?!?! Problably not,if i was a betting man ! Thanks Jose just the same. __________________ Tenn.man(a.k.a.Danny Cummings)

09-09-2004, 12:20 PM	#4
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Sent you a message on the carb... .i also have several quads that ran, but need seals and what not if you want one of them. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

09-09-2004, 03:17 PM	#5
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	thought you where going sbc this time? i have a 454 with a quadrajet on it i dont think im gonna use. __________________ 72 2wd blazer 72 swb 4x4

09-09-2004, 04:25 PM	#6
Tennman 71 Chevy 4x4 Join Date: Jan 2000 Location: McMinnville,Tn. USA Posts: 450	Sent you a PM meat ! Thanks ! __________________ Tenn.man(a.k.a.Danny Cummings)

09-09-2004, 06:55 PM	#7
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Danny, Which rear end do you have? Sounds like the eaton if you had to remove the axles to look at the brakes. I seen somebody parting a 67 3/4 ton w/ eaton rear that might still have those parts: http://67-72chevytrucks.com/vboard/s....php3?t=118522 __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

09-10-2004, 06:50 AM	#8
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	How wide are your brake drums/shoes? I might have what you need.

09-10-2004, 09:19 AM	#9
Tennman 71 Chevy 4x4 Join Date: Jan 2000 Location: McMinnville,Tn. USA Posts: 450	Thanks Jim for the link,and Meat and Dean i sent ya'll a pm ! Call me at 931-473-5401 if ya'll like . __________________ Tenn.man(a.k.a.Danny Cummings)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.