how much for a running 402BB (carb to pan) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ianjenkins · 09-10-2004, 12:37 PM

I'm considering selling a complete 402 BB. It runs great and is still in the truck (so you can hear it run). Good idle, sounds great, no leaks.

Carb to Pan (edelbrock carb)
all the brakets & accessories (ps & ac)

What do you think is a fair price for this?

Do you think I'll get alot of interest?

Thanks

c10crazy · 09-10-2004, 12:59 PM

It depends on mileage, stock or performance, burning oil, etc.

ianjenkins · 09-10-2004, 01:01 PM

mileage is unknown but the engine is very clean so I'd say its minimal. Stock build. Not burning a drop.

c10crazy · 09-10-2004, 01:03 PM

Sounds like a nice motor you got there. Guessing around $900.

**CPNE** · 09-10-2004, 01:07 PM

You can part the stock accessory brackets out for more than you can sell the bare block for. You could easilly get 400-500 for the bracketry alone (if complete). If 72, the frame stands will go for $100+, you get the idea. To sell as a package, low end would be $700 if its a runner.

ianjenkins · 09-10-2004, 02:23 PM

I'm thinking $900 is low. If we're talking $600 for brackets and frame stands, averge bare block price (in my neck of the woods) of $900 thats already over $1,500 without the carb and accesories. Plus, this one doesn't need to be rebuilt, here's a pic:

Anyway, think I could get $1,800 for it?

c10crazy · 09-10-2004, 02:36 PM

I didn't consider the brackets with my guess but $1800 might be pushing it. Good luck with the sale dude. Looks like a nice engine bay!.

flip66 · 09-10-2004, 04:22 PM

You want to sell that proportioning valve off the brakes, May be the compressor

longhorn71 · 09-10-2004, 05:42 PM

man i wish you were closer to me but it should be an easy sale

67ChevyC10Stepside · 09-10-2004, 05:53 PM

wth? lol

gmcnorton · 09-10-2004, 08:07 PM

are you parting that truck ???? why ???? gas mileage ??? i still want that truck...intrested in a trade for blazer ? it's running again. pm me please.

72 CustomCamper · 09-11-2004, 01:26 AM

I just sold tonight a running 402 carb to oil pan, only thing the motor needs is valve springs for $500. tried to sell it for a month at $700 but no takers...

Chuck

TexasRedIron · 09-11-2004, 06:49 AM

Man! I don't know where these prices are coming from. I have a great running Big block in my 1972

3 dr. Burb. I would sell the whole truck running down the road for $1300. Mileage since rebuild approx. 35,000 miles. Looks all original. Has the big block, 400 turbo, dual A/C (hooked up with free spinning compressor, but not blowing cold), power steering ( needs high pressure hose), power disc brakes, average body (has some rust), thrashed interior, ralley wheels.

09-10-2004, 12:37 PM	#1
ianjenkins Registered User Join Date: Mar 2003 Location: Frederick, MD Posts: 160	how much for a running 402BB (carb to pan) I'm considering selling a complete 402 BB. It runs great and is still in the truck (so you can hear it run). Good idle, sounds great, no leaks. Carb to Pan (edelbrock carb) all the brakets & accessories (ps & ac) What do you think is a fair price for this? Do you think I'll get alot of interest? Thanks

09-10-2004, 12:59 PM	#2
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	It depends on mileage, stock or performance, burning oil, etc. __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

09-10-2004, 01:03 PM	#4
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	Sounds like a nice motor you got there. Guessing around $900. __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

09-10-2004, 01:07 PM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	You can part the stock accessory brackets out for more than you can sell the bare block for. You could easilly get 400-500 for the bracketry alone (if complete). If 72, the frame stands will go for $100+, you get the idea. To sell as a package, low end would be $700 if its a runner. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

09-10-2004, 02:23 PM	#6
ianjenkins Registered User Join Date: Mar 2003 Location: Frederick, MD Posts: 160	I'm thinking $900 is low. If we're talking $600 for brackets and frame stands, averge bare block price (in my neck of the woods) of $900 thats already over $1,500 without the carb and accesories. Plus, this one doesn't need to be rebuilt, here's a pic: Anyway, think I could get $1,800 for it? Attached Images

09-10-2004, 01:01 PM	#3
ianjenkins Registered User Join Date: Mar 2003 Location: Frederick, MD Posts: 160	mileage is unknown but the engine is very clean so I'd say its minimal. Stock build. Not burning a drop.

09-10-2004, 02:36 PM	#7
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	I didn't consider the brackets with my guess but $1800 might be pushing it. Good luck with the sale dude. Looks like a nice engine bay!. __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

09-10-2004, 04:22 PM	#8
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	You want to sell that proportioning valve off the brakes, May be the compressor

09-10-2004, 05:42 PM	#9
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	man i wish you were closer to me but it should be an easy sale

09-10-2004, 05:53 PM	#10
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	wth? lol __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

09-10-2004, 08:07 PM	#11
gmcnorton Registered User Join Date: Aug 2002 Location: Middleport, Pa. 17953 Posts: 737	parting are you parting that truck ???? why ???? gas mileage ??? i still want that truck...intrested in a trade for blazer ? it's running again. pm me please. __________________ 70 GMC SHORT STEP , 71 BLAZER ,72 JIMMY,72 BLAZER, JUST NEED THAT SUBURBAN NOW......WANTING MORE

09-11-2004, 01:26 AM	#12
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	I just sold tonight a running 402 carb to oil pan, only thing the motor needs is valve springs for $500. tried to sell it for a month at $700 but no takers... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

09-11-2004, 06:49 AM	#13
TexasRedIron Registered User Join Date: Jul 2004 Location: Bonham, Texas Posts: 13	402BB engine Man! I don't know where these prices are coming from. I have a great running Big block in my 1972 3 dr. Burb. I would sell the whole truck running down the road for $1300. Mileage since rebuild approx. 35,000 miles. Looks all original. Has the big block, 400 turbo, dual A/C (hooked up with free spinning compressor, but not blowing cold), power steering ( needs high pressure hose), power disc brakes, average body (has some rust), thrashed interior, ralley wheels. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.